beautiful car

 

can post pics of the migen front high speed tilt plate & S2k gear knob....

 

Dean,


You just next door and so just call me and see it first hand lor...

 

Thanks and care to share your ride??

 

it seems as if a number of members here are from singapore.

i think you guys also need to be posting pics of your car too, as this is a requirement for singapore members..

 

Well, I know a few who are lurking here but few will post. They know me as this is why they are replying here. My car is already here and we have an Accord forum in Singapore too. Most of them are sometimes too shy to post pics.

We have full mugen kits Euro R or CL7 autos, real kits and replicas too. One was on the US kit. Most of the autos usually buy the Euro R body side kits.

HKS, Mugen, FujiSurbo are the usual exhaust done. Headers choices will be Toda and one running on 6sigma (US) and one auto running on the Taiwan header.

Intakes will be Mugen, Grupp M or simple open pods systems. Meters are the usual APEXI, DEFI and HKS or Pivot.

Brakes systems : many from Spoon to Wilwood. Rims are the usual expensive shoes... We only get Jap parts as closer match for the car. Some of us look at the TSX and see if anything that could give the car a different option.

No easy to get aftermarket parts but after 3 years now, more of such comes into the market.

 

Im over in the 1st g TL side,

links so i dont cluter ur thread

http://img88.imageshack.us/img88/6703/huggs21fe.jpg

http://static.flickr.com/52/126804763_fcff6a5e99_o.jpg

http://static.flickr.com/47/129796875_2396661e4f_o.jpg

would like to see an update pic of ur car

 

must let the bros here drool.... over your mods mah.....

 

Wowowo, nice and always like the TL. Thanks for sharing and nice car dude!

Will post when car ready...

 

17 July Update so far......

Modifications

1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. CUSCO lower front 4 point strut
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear boot
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector
40. Mugen grill with Red H badge
41. Mugen front high speed tilt plate
42. Flat wipers
43. S2000 gear knob
44. Accord scuff plates
45. SPC Rear Camber Kit
46. Neuspeed short shift
47. In trunk side netting

coming soon......
Sparco Racing Rims 17” with RE 050 tyres
Rear customized duck spoiler
Rear fin (not sure if I will do this as it makes the car seem strange....)

 

car still in transformation. Most are basic mods.....Just some small details which takes the boredom off me...

 

Ugh, I wanna re-badge my tsx as well, but 1 thing is keeping me from it.....I have Acura wheel caps, and those would completely throw off the whole image of a Euro Accord.

 

Must have black window trim. Looks so much better than the chrome!

 

Well, get a set of the Euro R rims which is 215/45/17 and offset 55. Else, get as et of rims and then you don't have the Acura words...

It is funnt that US likes to go JDM whilw we have the JDM and we just do some tweaking mods.....

 

My JDM Euro R already comes with black window trims. Only the autos have the chrome stuff but many have re-blacken them or had black stickers over it...

 

Beautiful car!

Would love to see some pics of you DIY lower front and rear reinforcements!

-Jeff

 

I know, if only my US TSX would've come that way. So nice! Keep up the nice work and mods.

 

Rofl, I wanna rebadge, but im not going to buy new wheels just so I can do it...doesnt make a whole lot of sense....I like my wheels, they just keep me from going to the Honda theme.

 

Thanks!
Will try and it will take a while to get the shots done. Front lower noticeable but the rear is pretty well hidden.....

 

Well, you will do the mods the way you would like. Some suggestions :

A body kit would add spice to your nice car
Suspension lowered
Air intake. I rather save the dough for a supercharger or turbo charger.

We don't have the chargers as options. Too bad for us. Keep sharing your ideas!

 

Thanks. Im saving up already for a Kenstyle body kit....possibly HRE wheels. I really hate to change the suspension becuase it may mess up any warranty coverage I have on the vehicle. Same with intake/engine mods. Thanks again for your input though.

 

I can understand this warranty thing. Keep the mods in thoughts...Go go go..

 

What is that black thing on the Hood???

 

The black thing is a EGR hood deflector. If you notice closely, my headlights are also covered with protectors/ The purpose is to prevent knocks of stones thrown and damaging the headlights.

It was spreayed black and now I am getting it to body colour...

 

What clutch r u bypassing? Air Con?

 

Cooleh....it's for bypassing having to step clutch pedal when starting engine motor!!!!

 

Cooleh's is just pulling my clutch.......muahahahahh. Thanks for your reply. He can't list his mods here as it will be mega mouth watering...

 

26 July Update so far......

Modifications

1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. CUSCO lower front 4 point strut
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear boot
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector (coloured red)
40. Mugen grill with Red H badge
41. Mugen front high speed tilt plate
42. Flat wipers
43. S2000 gear knob
44. Accord scuff plates
45. SPC Rear Camber Kit
46. Neuspeed short shift
47. In trunk side netting
48. Sparco Racing Rims - British Black


coming soon......
Rear customized duck spoiler or M3 lip??
Rear fin (not sure if I will do this as it makes the car seem strange....)

 

25 Sept Update so far......

Modifications

1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. CUSCO lower front 4 point strut
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear boot
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector (coloured red)
40. Mugen grill with Red H badge
41. Mugen front high speed tilt plate
42. Flat wipers
43. S2000 gear knob
44. Accord scuff plates
45. SPC Rear Camber Kit
46. Neuspeed short shift
47. In trunk side netting
48. Sparco Racing Rims - British Black
49. Toda exhaust header
50. Lower front grill
51. Yellow H11 fog lights
52. Rear lower 2 fins


coming soon......
Rear customized duck spoiler or M3 lip??
Rear fin (not sure if I will do this as it makes the car seem strange....)

:wish

 

26 Sept Update so far......

Modifications

1. Extra Lacquer coating on whole car when new
2. Tinting dark rear and lighter front
3. DIY lower front strut bar
4. DIY lower rear reinforced bar
5. DIY fog light black netting
6. DIY front scoop black netting.
7. DIY Open pod air intake system with fan intake & switch with CAI
8. DIY Clutch by-pass switch
9. DIY Oil Catch tank TWE
10. DIY ULTRA grounding cables + extra grounding points
11. BRISK K20 Racing Spark Plugs
12. Some customised logos
13. CUSCO lower front 4 point strut
14. CUSCO upper front strut bar
15. PIVOT Voltage stabilizer
16. PIVOT Audio stabilizer
17. PIVOT 3 point Shift light
18. APEXI Rev Speed meter with sound buzzer
19. Niken Pitch & roll meter
20. Niken Altitude meter
21. Mitsubishi motorized rear shade
22. Front - Blue strobe light with switch
23. Rear – Blue strobe light with switch
24. PTFE Teflon brake hoses – Goodrich
25. Ferrado front brake pads high temp 500
26. Ferrado rear brake pads high temp 500
27. Tomei adjustable Coilovers & dampers
28. Mugen engine oil cap
29. Mugen petrol cover
30. Mugen leather gear boot
31. Leather red handbrake cover
32. Fujisurbo Legalise R exhaust with Polyurethane bushings x 3
33. Pioneer ICE with 12 CD changer, MP3, with integrated
stockhead unit as auxiliary
34. US amps + rear & front speakers + tweeters + boozoka base tube
35. 4 point Reverse sensors with digital distance readout
36. Magnetised oil filter
37. Rear side luggage netting
38. EGR front light covers
39. EGR bonnet protector (coloured red)
40. Mugen grill with DIY modified H emblem nose
41. Mugen front high speed tilt license plate
42. Flat wipers
43. S2000 gear knob
44. Accord scuff plates
45. SPC Rear Camber Kit
46. Neuspeed short shift
47. In trunk side netting
48. Sparco Racing Rims - British Black
49. Toda exhaust header
50. DIY Lower front grill
51. Yellow H11 fog lights
52. DIY Rear lower 2 fins
53. H1 high light 100W
54. Yellow bulbs rear side lights
55. Red bulbs rear brake lights
56. Green bulbs reverse lights

coming soon......
Rear customized duck spoiler or M3 lip??
Rear fin (not sure if I will do this as it makes the car seem strange....)

:wish


Car looks different now....need to get some shots done soon....

 

can i get a picture of the accord scuff plate

 

Now this is what a real JDM ride looks like, no RonJon wheels......

 

isn't getting banned in one forum enough already? stop being a douche and posting totally unrelated personal attacks

 

 

That's a beautiful car you have there...but I'm quite new to the JDM scene of the TSX/Accord...do you think you could enlighten me as to what the difference is between the CL7 and the CL9?

 

yeah...can we get some updated pics?

 

Dude, lay off the guy. You've made your point, no need beating the dead horse.

 

Many apologies as I have been busy travelling and also picking up different stuff as well as family and also the Accord family.

The car looks different from the pics then as it was almost stock. Now with the mugen and blah blah, it looks fiercer.

I simply have to get the pics done when I can. Many apologies but will do so on most of the mods stuff so you guys can understand what I have done.

 

No offence dude, but what do you mean by RonJon wheels?

 

I don't know wicketk24, so just let him be unless it gets offensive.