First time posting pictures of my car. Milano Red!!
#1
First time posting pictures of my car. Milano Red!!
Yea this is my first time actually posting pictures of my baby!.. The car was semi dirty because it rained this morning!
Here she is...
I have to do the black out tape again because on some parts the sun shrunk it... but hope you like!
Here she is...
I have to do the black out tape again because on some parts the sun shrunk it... but hope you like!
#5
Originally Posted by CarbonGray Earl
Nice. I like what you were aiming for...blacked out. I just want to suggest taking away all of the chrome....debadge and black out the grill as well.
otherwise, it looks cool.
otherwise, it looks cool.
Trending Topics
#13
Originally Posted by jaehshim
damnn that's hot
you just need ingalls camber in the rear to finish the perfect look.
nice fine NJ tsx. lol
you just need ingalls camber in the rear to finish the perfect look.
nice fine NJ tsx. lol
#14
There are 2 kinds of ingall camber kits I believe. Each one has a different range of adjustability. Maybe you have the wrong one?
I was going to "quote" a picture but replace it with one that had a ghost photoshopped into it...but nah...=P
I was going to "quote" a picture but replace it with one that had a ghost photoshopped into it...but nah...=P
#21
looks clean to me! i also have a milano red/ebony tsx-a 06 6spd w nav. Keeping it the way I bought it-no mods and no lowering. love it, bought new 11/17/06, now has 22,000+ miles on it.
#24
Looks pretty good for the most part. I also think you should black out the entire front grille or get an aftermarket grille (painting it red might look good).
I actually think it would look better if it wasn't dropped so much with a lip kit.
You can get the tint for side mirrors on www.rockblocker.com.
I thought about doing that too.
I actually think it would look better if it wasn't dropped so much with a lip kit.
Originally Posted by jwood_06TSX
I like the "dark" look! Where did you get the film to cover up your mirror lights? Also, what % is on your rear tail lights?
You can get the tint for side mirrors on www.rockblocker.com.
I thought about doing that too.
#26
Originally Posted by occdoc
Where did you get your windows tinted? Did you get the moleskin installed? Any scratches or problems with the tint job?
I'm out near Trenton sometimes and am looking for a good place to get my windows tinted.
I'm out near Trenton sometimes and am looking for a good place to get my windows tinted.
#27
Originally Posted by occdoc
Where did you get your windows tinted? Did you get the moleskin installed? Any scratches or problems with the tint job?
I'm out near Trenton sometimes and am looking for a good place to get my windows tinted.
I'm out near Trenton sometimes and am looking for a good place to get my windows tinted.
#28
Originally Posted by HONgDA
Everything looks clean except for the fake rivets on the rims.
#29
Originally Posted by PrecyseStylez
I think i blacked out the grill as much as i can... i did all around acura symbol. That's the only way it looks clean.. anymore is over kill.. but im waiting to get a mugen grill and carbon fiber hood.. but yes i have to debadge as well.. thats next!
#30
Originally Posted by PrecyseStylez
The strangest thing... i have ingalls rear camber kit on.. i took it to get an alignment and they told me they cant adjust it.. its at its max and cant go any more positive! and they know that i have the adjustable camber kit.. arent there two rods on both sides that you have to adjust and not just one to go positive? does anyone know off hand? Maybe i should post this in the performance forum
Wheels +tires together don't look too big or too small, compared to OEM ones, don't know why they can't do it
after checking camber and if the parts are right, try Eurotire in Fairfield, NJ (maybe it's a bit far up north for you).
www.eurotire.com
lots of S2000s go do their allignment done at this shop, and i took my 06 tsx there to get my camber done. took about 30 minutes. unlike other shops which told me they can't do aftermarket , can't work with ingalls because they ain't familar with them, this shop knew everything. simple and quick.
I'm sure that mine is lower than your ride, i think ~2.0 to 2.3inch lowered. but they did a correct job getting my ingalls done.
#33
That's a unique look, props to you man. Looks hot.
My comments are as follows...
1) Lose the mud guards if possible, to me they only fit on NBP or CGP cars
2) I think painted calipers would set your rims off - either black, black with white Acura lettering, or possibly red (if you can get it a close match to the Milano red). Red calipers with blacked out rims would be a hot contrast.
My comments are as follows...
1) Lose the mud guards if possible, to me they only fit on NBP or CGP cars
2) I think painted calipers would set your rims off - either black, black with white Acura lettering, or possibly red (if you can get it a close match to the Milano red). Red calipers with blacked out rims would be a hot contrast.
#34
Originally Posted by Audioserf
That's a unique look, props to you man. Looks hot.
My comments are as follows...
1) Lose the mud guards if possible, to me they only fit on NBP or CGP cars
2) I think painted calipers would set your rims off - either black, black with white Acura lettering, or possibly red (if you can get it a close match to the Milano red). Red calipers with blacked out rims would be a hot contrast.
My comments are as follows...
1) Lose the mud guards if possible, to me they only fit on NBP or CGP cars
2) I think painted calipers would set your rims off - either black, black with white Acura lettering, or possibly red (if you can get it a close match to the Milano red). Red calipers with blacked out rims would be a hot contrast.
#35
Originally Posted by jaehshim
yes it should be able to adjust to the correct position.
Wheels +tires together don't look too big or too small, compared to OEM ones, don't know why they can't do it
after checking camber and if the parts are right, try Eurotire in Fairfield, NJ (maybe it's a bit far up north for you).
www.eurotire.com
lots of S2000s go do their allignment done at this shop, and i took my 06 tsx there to get my camber done. took about 30 minutes. unlike other shops which told me they can't do aftermarket , can't work with ingalls because they ain't familar with them, this shop knew everything. simple and quick.
I'm sure that mine is lower than your ride, i think ~2.0 to 2.3inch lowered. but they did a correct job getting my ingalls done.
Wheels +tires together don't look too big or too small, compared to OEM ones, don't know why they can't do it
after checking camber and if the parts are right, try Eurotire in Fairfield, NJ (maybe it's a bit far up north for you).
www.eurotire.com
lots of S2000s go do their allignment done at this shop, and i took my 06 tsx there to get my camber done. took about 30 minutes. unlike other shops which told me they can't do aftermarket , can't work with ingalls because they ain't familar with them, this shop knew everything. simple and quick.
I'm sure that mine is lower than your ride, i think ~2.0 to 2.3inch lowered. but they did a correct job getting my ingalls done.
#36
Originally Posted by PrecyseStylez
Im still thinking about painting the calipers are just getting a brake kit.. I kept the mud guards because it mixed well with all the black.. but i might take them off because my driver side mud guard scrapes to the point its' worn now...but only on the driver side front. I went low because the tires are so thin so it looked alil funny... im happy with the look so far.. i just need bigger tires, the rims are 18 inch Akita
Hot car!