Taking the car to the next step
#1
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,856 Likes
on
2,579 Posts
Taking the car to the next step
Well I just got back from my local shop after order a couple new parts. First off I ordered a set of Spoon calipers for my brakes. I ordered a set of recaro seats and some takata harnesses. I also ordered 3 defi gauges for the a-pillar (volt meter, air-to-fuel ratio, and oil presure), then my shop will be making me a custom a pillar mount for them. I also ordered the j's racing single exhaust and gruppeM intake to finish it off. I should have all the parts around june or so but most of the before that.
#4
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,856 Likes
on
2,579 Posts
...
oh by the way april fools
oh by the way april fools
#6
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,856 Likes
on
2,579 Posts
Originally Posted by xizor
hmm... what day is it again? scary thing is, cccolt will probably do all of these eventually
Trending Topics
#8
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,856 Likes
on
2,579 Posts
Originally Posted by Zasker1
bastard, I was stoked about the custom a-piller
#10
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,856 Likes
on
2,579 Posts
Originally Posted by CGTSX2004
Eh...when you say you're buying stuff, it's hard not to believe it since you spend money like it falls from trees.
#12
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,856 Likes
on
2,579 Posts
Originally Posted by JTso
Anything that is mounted near the a-pillar is a bad thing for the TSX. Don't forget the airbag there. But then again, he doesn't care about the steering wheel airbag either...
#13
Suzuka Master
Join Date: Jul 2003
Location: Cincinnati, OH
Age: 49
Posts: 7,594
Likes: 0
Received 4 Likes
on
3 Posts
Originally Posted by JTso
Anything that is mounted near the a-pillar is a bad thing for the TSX. Don't forget the airbag there. But then again, he doesn't care about the steering wheel airbag either...
#14
Just dial 1911
Join Date: May 2004
Location: San Diego, CA
Age: 49
Posts: 12,144
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by CGTSX2004
Eh...when you say you're buying stuff, it's hard not to believe it since you spend money like it falls from trees.
I know your a student Colt, but I know what you do for a job...manwhore?
#16
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,856 Likes
on
2,579 Posts
Originally Posted by lito
You did'nt fool me one bit buddy. Nice wish list though
#18
Bye TSX, hello domestic?
Join Date: Jan 2004
Location: NOVA
Age: 42
Posts: 8,552
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CCColtsicehockey
well I am either removing the airbag since they wont work again once I remove the seats or I am going to get a custom mount done like ones in a WRX above the center console A/C vents.
#19
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,856 Likes
on
2,579 Posts
Originally Posted by xizor
2 gauges in the pocket above the not an ashtray would be cool. but honestly, any gauges w/o a boost gauge is
#22
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,856 Likes
on
2,579 Posts
Originally Posted by PixelHarmony
Haha, what's scary is that the April fools part didn't phase me... I want to see that single exhuast!
#24
tehLEGOman
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,225
Received 1,983 Likes
on
1,336 Posts
Damn you got me Jason..i was all excited and everything man.
That is a bad ass list though..
One option for the gauges are the suction cup mounts. I've seen these on a few cars in magazines but never in person. Hopefully someone at SEMA IAS will have some so i can find out who makes them and where to order them from.
That is a bad ass list though..
One option for the gauges are the suction cup mounts. I've seen these on a few cars in magazines but never in person. Hopefully someone at SEMA IAS will have some so i can find out who makes them and where to order them from.
#27
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,856 Likes
on
2,579 Posts
Originally Posted by Chris_F
CCC = the mod master
#29
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,856 Likes
on
2,579 Posts
Originally Posted by Benz_05_TSX
^ no...CCC = rich bastard!
#31
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,856 Likes
on
2,579 Posts
Originally Posted by Benz_05_TSX
HAhaha..admit it man! I wish i was one...damn the cars i would have...and mods..
#32
Burning Brakes
Join Date: Sep 2004
Location: Queensland, Australia
Age: 37
Posts: 991
Likes: 0
Received 0 Likes
on
0 Posts
respect you working for your mods - must make it all the sweeter when you get those rare parts.
what time is it over their guys? I'm getting my intake tomorrow (its 12am here)
haha maybe he isn't super rich and maybe he is? lol.. i have a feeling almost all the money CCC earns goes to his mods...
btw - can't wait till you do go to the next step, you gonna get a manual conversion so you can put on a JDM shift knob?
what time is it over their guys? I'm getting my intake tomorrow (its 12am here)
haha maybe he isn't super rich and maybe he is? lol.. i have a feeling almost all the money CCC earns goes to his mods...
btw - can't wait till you do go to the next step, you gonna get a manual conversion so you can put on a JDM shift knob?
#33
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,856 Likes
on
2,579 Posts
Originally Posted by Chris_F
respect you working for your mods - must make it all the sweeter when you get those rare parts.
what time is it over their guys? I'm getting my intake tomorrow (its 12am here)
haha maybe he isn't super rich and maybe he is? lol.. i have a feeling almost all the money CCC earns goes to his mods...
btw - can't wait till you do go to the next step, you gonna get a manual conversion so you can put on a JDM shift knob?
what time is it over their guys? I'm getting my intake tomorrow (its 12am here)
haha maybe he isn't super rich and maybe he is? lol.. i have a feeling almost all the money CCC earns goes to his mods...
btw - can't wait till you do go to the next step, you gonna get a manual conversion so you can put on a JDM shift knob?
#34
Burning Brakes
Join Date: Sep 2004
Location: Queensland, Australia
Age: 37
Posts: 991
Likes: 0
Received 0 Likes
on
0 Posts
Man i wish i had the courage to change the seats... but i'd probably get defected for removing a safety feature (the airbags)... if i build up the courage i'd wanna get some lightweight carbon fiber spoon/bride seats. I'd say the stock seats are damn heavy and they'd be one of the best mods for weight reduction.
fair enough waiting till your out of collage - youll get there and eventually be finished.. is it even possible to be finished?
fair enough waiting till your out of collage - youll get there and eventually be finished.. is it even possible to be finished?
#35
Drifting
iTrader: (1)
Originally Posted by CCColtsicehockey
dude I work for my mods. I admit i didnt pay the car but the mods I have man.
dude, i work hard and i don't have that much mods, so who's richer now huh??
#36
Drifting
iTrader: (1)
Originally Posted by Chris_F
respect you working for your mods - must make it all the sweeter when you get those rare parts.
what time is it over their guys? I'm getting my intake tomorrow (its 12am here)
haha maybe he isn't super rich and maybe he is? lol.. i have a feeling almost all the money CCC earns goes to his mods...
btw - can't wait till you do go to the next step, you gonna get a manual conversion so you can put on a JDM shift knob?
what time is it over their guys? I'm getting my intake tomorrow (its 12am here)
haha maybe he isn't super rich and maybe he is? lol.. i have a feeling almost all the money CCC earns goes to his mods...
btw - can't wait till you do go to the next step, you gonna get a manual conversion so you can put on a JDM shift knob?
i work for all my mods...ALL my money goes to my car man...
and our AT, can change shift knob! CCC has a silver CF one!
#37
Burning Brakes
Join Date: Sep 2004
Location: Queensland, Australia
Age: 37
Posts: 991
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Benz_05_TSX
it's 7:43 am right now..NO SLEEP! hahahhaa...i work for all my mods...ALL my money goes to my car man...
and our AT, can change shift knob! CCC has a silver CF one!
and our AT, can change shift knob! CCC has a silver CF one!
whats next for you benz?
#38
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,856 Likes
on
2,579 Posts
Originally Posted by Chris_F
haha damn it just hit 1am i gotta get some sleep... I didnt really know changing the AT knob was possible pretty cool.
whats next for you benz?
whats next for you benz?
#39
Rep'n Taxbrain.com
Join Date: Aug 2004
Location: N. Cali-forn-i-a
Age: 44
Posts: 7,075
Likes: 0
Received 3 Likes
on
3 Posts
Haha...pretty funny joke! Just goes to show that no matter what they are always a lot more mods you can buy. I actually want to take a break from modding for awhile after I do my brakes. We'll see if I can do it.
#40
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,856 Likes
on
2,579 Posts
Originally Posted by Tsx536
Haha...pretty funny joke! Just goes to show that no matter what they are always a lot more mods you can buy. I actually want to take a break from modding for awhile after I do my brakes. We'll see if I can do it.
Thread
Thread Starter
Forum
Replies
Last Post
Mugen TSX
Eastern Canada
0
09-01-2015 11:11 PM