p2r throttle body spacer/gaskets install
#42
Originally Posted by GSGOMEZ
Oh I see, I wonder if it can install a gasket with throttle body only instead of spacer and gasket with throttle body together because of CAI intake issue. It almost same as Hondata gasket installation. Let me know.
Thanks,
George
Thanks,
George
#43
Originally Posted by GSGOMEZ
Damn, that's interesting for P2R with 4.5whp. I am considering to buy one from Excelerate Performance, but my concern is that I have Injen CAI and will fit into with P2R or do some adjust. I know that P2R offers +06TSX, but some comments said +06 Si will fit on TSX.
#46
Originally Posted by feuss2
someone dyno 1 gasket vs 2 gaskets + spacer plz!!! what gomez sais--there is no hondata intake manifold spacer!!!
#47
Originally Posted by xjohnkdoex
if you have an injen, something will need to be cut.
gaskets + spacer = 1"+ added to the TB. that means you're pushing the CAI that same exact length to the right, which i assume will throw off the position of the vibration mounting bracket.
so somewhere, you're going to have to shave off that length on the injen or k&n to make it fit. it works for the icebox b/c the air tube is hard rubber and somewhat pliable.
gaskets + spacer = 1"+ added to the TB. that means you're pushing the CAI that same exact length to the right, which i assume will throw off the position of the vibration mounting bracket.
so somewhere, you're going to have to shave off that length on the injen or k&n to make it fit. it works for the icebox b/c the air tube is hard rubber and somewhat pliable.
#48
Thread Starter
where is my garage?!
iTrader: (2)
Joined: Oct 2006
Posts: 1,857
Likes: 1
From: nassau county, ny
Originally Posted by Zyuan10
So this mod can bolt-on without additional adjustments if you have a Comptech Icebox? No cutting?
you may have to fiddle around with the fitment. i noticed after i put everything back on, there was a little crimping by the end of the airbox. i'm going to clean out my K&N filter sometime soon, so i'll probably line up the tube better then.
#50
I spoke with Sean at PowerRevRacing and asked him if +06Si TB spacer and 2 gaskets will fit +04TSX, he said no because of a little different design and need to modify on TSX. He said that they will make one for +04TSX later. What do you think and any suggestion? Let ask moda_way or Jtso.
Thanks,
George
Thanks,
George
#51
Originally Posted by GSGOMEZ
I spoke with Sean at PowerRevRacing and asked him if +06Si TB spacer and 2 gaskets will fit +04TSX, he said no because of a little different design and need to modify on TSX. He said that they will make one for +04TSX later. What do you think and any suggestion? Let ask moda_way or Jtso.
Thanks,
George
Thanks,
George
I'm pretty sure someone on the forum here did it already and said that the bolts line up and the ID are the same. There was one difference if I recall, trying to rembmer, but it didn't affect installation or fitment. If they are going to make an 04 TSX specific application, then they need to do it. Let me do some searching though b/c I do remember someone doing it.
EDIT: just found the reference to it...
https://acurazine.com/forums/showthr...6&page=4&pp=40 post 154 Carbongrayearl supposedly has done it and I'm told that others have too.
#52
Originally Posted by GSGOMEZ
Hey I found a good deal for P2R throttle body for +06 Si at $108.00 shipped from teamxxxracing.com. I will probably order it in a couple of week.
#53
Originally Posted by moda_way
Does that include the 2 gaskets though? Excelerate has this entire setup for $120 shipped (check for Canada) and you can't beat his service or price.
You can purchase the gasket and/or spacer directly from my online store here... http://www.teamxxxracing.com/osstore...16b4fbdcb69961 Or if you want to call to place the order... TB Gasket price shipped... $22TB Spacer with 2 gaskets shipped... $108 Let me know if i have answered all your questions. Rob Ingles Teamxxxracing.comringles@teamxxxracing.comPH 617-908-1584
You can give them a call and find it out.
#55
Originally Posted by moda_way
I'm pretty sure someone on the forum here did it already and said that the bolts line up and the ID are the same. There was one difference if I recall, trying to rembmer, but it didn't affect installation or fitment. If they are going to make an 04 TSX specific application, then they need to do it. Let me do some searching though b/c I do remember someone doing it.
EDIT: just found the reference to it...
https://acurazine.com/forums/showthr...6&page=4&pp=40 post 154 Carbongrayearl supposedly has done it and I'm told that others have too.
EDIT: just found the reference to it...
https://acurazine.com/forums/showthr...6&page=4&pp=40 post 154 Carbongrayearl supposedly has done it and I'm told that others have too.
#56
Originally Posted by godfather2
i prefer forum vendors because i KNOW they provide top notch service. just sent payment for my tb gasket through excelerate $30 including shipping =).
#57
Originally Posted by GSGOMEZ
That's interesting, let me know if it works out with +06 Si Tb spacer and 2 gaskets. Thanks moda_way!
#59
Originally Posted by JTso
fun money = stimulus check?
#60
Originally Posted by godfather2
925tsx, i pm'ed josh at excelerate and it will have to be cut. therefore i'm just going to purchase the gasket and not the spacer
Originally Posted by 925tsx
Am i going to have to Cut my Injen intake in order for it to fit back into the car with the P2r spacer installed?
Originally Posted by 925tsx
So yea, does anyone know FOR SURE?
sry, im not trying to be a dick, but im trying to avoid answers like "shouldnt need to"
id like to hear directly from someone with an Injen CAI that installed this recently.
i need a 100 % answer.
sry, im not trying to be a dick, but im trying to avoid answers like "shouldnt need to"
id like to hear directly from someone with an Injen CAI that installed this recently.
i need a 100 % answer.
Not sure what you guys are referring to in regards to cutting, but I have Injen CAI and the P2R TB Spacers w/ gaskets, nothing was cut. Only tiny issue was the bracket on the CAI that bolts to the battery tie was shifted over by an inch. which was solved with a small metal bracket I got from Home Depot.
#62
Originally Posted by HoRRo
Not sure what you guys are referring to in regards to cutting, but I have Injen CAI and the P2R TB Spacers w/ gaskets, nothing was cut. Only tiny issue was the bracket on the CAI that bolts to the battery tie was shifted over by an inch. which was solved with a small metal bracket I got from Home Depot.
yea, please post a pic and part number if you can of this bracket you bought at home depot.
Im gonna need this info as im doing this mod soon.
#63
Originally Posted by 925tsx
yea, please post a pic and part number if you can of this bracket you bought at home depot.
Im gonna need this info as im doing this mod soon.
Im gonna need this info as im doing this mod soon.
The brackets cost something like $0.79 (yes, cents) for a pack of 3 or 4. You will have to bore out the holes in bracket for the bolts to fit in.
#67
I spoke with Rob from Teamxxxracing.com on phone about 06 Si TB Spacer with 2 gaskets on 04-05 TSX, he said that it will fit but the coolant passage is different design. He also said that they will make one for 04-05 TSX for other 1 to 2 months. Check the comment:
Hi George, After talking with P2R, They are planning on making a TB spacer and gasket for the 04-05 TSX but it won't be for another month or two. You are correct about the 06 Si being the same size and it does have the same bolt pattern, but the coolant passage is different so modification would be needed on the 06 Si spacer and gasket for it to work with your car.
So the price will be $108.00 shipped with 2 gaskets and TB spacer for 06Si. I probably prefer to wait for new part on TSX.
Hi George, After talking with P2R, They are planning on making a TB spacer and gasket for the 04-05 TSX but it won't be for another month or two. You are correct about the 06 Si being the same size and it does have the same bolt pattern, but the coolant passage is different so modification would be needed on the 06 Si spacer and gasket for it to work with your car.
So the price will be $108.00 shipped with 2 gaskets and TB spacer for 06Si. I probably prefer to wait for new part on TSX.
#70
^ don't i know it. it's people like you that give this community a good name. i can do most of the work on my car myselft, but i usually wait for the diy or some tips/tricks from you motor geeks lol
#71
Originally Posted by godfather2
^ don't i know it. it's people like you that give this community a good name. i can do most of the work on my car myselft, but i usually wait for the diy or some tips/tricks from you motor geeks lol
I'm gonna see what Excelerate can find out about the 04-05 TB release date. When someone says, "We'll have it done in a month or two..." often means, "We are waiting for some sort of demand that makes us want to manufacture it."
#73
Originally Posted by godfather2
u sure are right and usually that "month or so" is really just buying time until the actual release date about 3 months later
#74
Hey I spoke with Sean at PowerRevRacing yesterday and asked him when will P2R TB spacer and gaskets be in stock for 04-05 TSX. He said that it will be ready by third weeks of June. I also asked him if TB will offer 3 different colors of red, black, and gold? He said no, because he decided to make black one only instead of making too many TB with different colors. I told him let me know thru Email. I want Red one!!! But I guess I will accept the black one. :shakehead
#75
Hey check the 06 Si polished and red TB spacer picture:
http://www.8thcivic.com/forums/excel...tb-spacer.html
http://www.8thcivic.com/forums/bolt-...-tbspacer.html
I thought that both TB colors looked nice on TSX engine bay with red and silver. I spoke to Rob at TeamXXXRacing and told him about the black TB spacer color offering only for 04-05 TSX. I also told him that I like Red, he said that yeah but he can try to get a polished TB and will email me back next week to find it out.
http://www.8thcivic.com/forums/excel...tb-spacer.html
http://www.8thcivic.com/forums/bolt-...-tbspacer.html
I thought that both TB colors looked nice on TSX engine bay with red and silver. I spoke to Rob at TeamXXXRacing and told him about the black TB spacer color offering only for 04-05 TSX. I also told him that I like Red, he said that yeah but he can try to get a polished TB and will email me back next week to find it out.
#76
installed the p2r throttle body gaskets and spacer yesterday with the help of chill_dog. couldn't tackle the p2r img because we just couldn't figure the damned thing out -- wtf is a intake manifold bracket that can be found from underneath the car? guess i'll have to find a local shop
#79
JTso is correct about # 3 to release the Intake Manifold bracket. When I installed P2R gasket in IM, I removed the bolt at number 22 with bracket number 3 to move IM. It was a little pain in ass to remove the bolt under the car.