k20r cams
#3
Suzuka Master
Originally Posted by sauceman
They don't.
#4
Teh seX
Join Date: Jul 2003
Location: unknown
Age: 40
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
i heard it may work with minor engine work.. i heard it from somewhere on this board a while ago when this question came up. i do not remember however what exactly was said..
#6
Suzuka Master
I can easily swap in the ITR cams and IM again. The trouble is that Hondata has no reflash for this application when it comes to sticking these in a K24. They had a readily available app when it came to swapping these into a K20. Don't expect them to make one for the K24 with ITR cams and IM. There are a ton of guys that have this on their K20, but it's a different market than the TSX following.
#7
Bye TSX, hello domestic?
Join Date: Jan 2004
Location: NOVA
Age: 42
Posts: 8,552
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlackTSXer
i heard it may work with minor engine work.. i heard it from somewhere on this board a while ago when this question came up. i do not remember however what exactly was said..
Trending Topics
#8
Originally Posted by bostedtsx
does anyone know if integra r cams will work with the k24?
But:
- The TSX Exhaust cam both high and low lobes are bigger than the ITR exhaust
- The TSX intake cam has a bigger small lobe and a smaller big lobe than the ITR intake.
So - you might surmise swapping in the ITR intake cam might improve the high cam power.
So we tried it and lost power everywhere under 7000 rpm.
After a lot more cam and intake testing we have determined that a race header must be in place before any cam change will make power.
I have a lot of respect for the Honda and the cam profiles they have developed for the TSX. They are very good.
Thread
Thread Starter
Forum
Replies
Last Post
ExcelerateRep
4G TL Performance Parts & Modifications
8
10-14-2015 08:20 AM