K Teller Mandrel DIY Exhaust Kit
03-16-2012, 10:45 PM
#1
K Teller Mandrel DIY Exhaust Kit
Hello everyone new the the Acurazine 1st Gen TSX forum, on a few other TSX forums and wanted to share this with you guys too.
There is interest on the other forums but i didn't want to not share it with you guys. This is what were trying to do....
I my opinion the exhaust systems don't really gain enough power for the price. It's outrageous!!! $600-1200 or MORE(ie Mugen Kits). I'm not made of Gold. I'm just made of 61.8% Water, 16.6% Protein, 14.9% Fat and 3.3% Human body weight. Like every other HUMAN! That works. No gold there.
So what do you guys think about asking K Teller to make us a Mandrel Exhaust Piping Kit?
I have been reading lots of stuff about the kits and from what i have been told its good for the price and anyone can find a good muffler shop to do the work.
Just wanted to run it by the forum. Let everyone dwell on that for a while. I'm sure there is one member that is in the area of Pensacola, FL that would be willing to be the Donor/test car.
What you guys think?
~~~~~~~~~~~~~~~~~~~~~~
Here are some links for info about his other products...
KTeller · Service | Integrity | Honesty
Mandrel Exhaust Piping Kits - KTeller
Why KTeller?s Exhaust? | KTeller.com | Sport Compact Performance Parts
Thanks everyone.
There is interest on the other forums but i didn't want to not share it with you guys. This is what were trying to do....
I my opinion the exhaust systems don't really gain enough power for the price. It's outrageous!!! $600-1200 or MORE(ie Mugen Kits). I'm not made of Gold. I'm just made of 61.8% Water, 16.6% Protein, 14.9% Fat and 3.3% Human body weight. Like every other HUMAN! That works. No gold there.
So what do you guys think about asking K Teller to make us a Mandrel Exhaust Piping Kit?
I have been reading lots of stuff about the kits and from what i have been told its good for the price and anyone can find a good muffler shop to do the work.
Just wanted to run it by the forum. Let everyone dwell on that for a while. I'm sure there is one member that is in the area of Pensacola, FL that would be willing to be the Donor/test car.
What you guys think?
~~~~~~~~~~~~~~~~~~~~~~
Here are some links for info about his other products...
KTeller · Service | Integrity | Honesty
Mandrel Exhaust Piping Kits - KTeller
Why KTeller?s Exhaust? | KTeller.com | Sport Compact Performance Parts
Thanks everyone.
03-17-2012, 12:37 AM
#2
Oh ya, here is a link also to the other forum post so you guys can see who else is interested in the TSX community.
KTELLER MANDREL DIY EXHAUST KIT
KTELLER MANDREL DIY EXHAUST KIT
03-18-2012, 01:44 AM
#3
This is an example of what the guys work looks like. For a 98 Prelude...
And this is an image of 2006 exhaust system as an example
I think this would be a great addition to the exhaust options. There are some many ways you can use this kind of kit.
More afordable way to go road racing, cheaper and much better way for a custom exhaust. There are SO many mufflers out there that i could dream of using on the TSX's but they just dont make them. Turbo guys are going to love this way cheaper way to get your 3" exhaust.
Hope there is some interest. Thanks for checking the thread.
And this is an image of 2006 exhaust system as an example
I think this would be a great addition to the exhaust options. There are some many ways you can use this kind of kit.
More afordable way to go road racing, cheaper and much better way for a custom exhaust. There are SO many mufflers out there that i could dream of using on the TSX's but they just dont make them. Turbo guys are going to love this way cheaper way to get your 3" exhaust.
Hope there is some interest. Thanks for checking the thread.
03-19-2012, 09:53 AM
#5
I ran their 3" exhaust on my RSX-S when I went turbo. Everything I needed was in the kit, it was a FULL 3" (most 3" exhaust systems bottleneck at the cat, because a 3" 3 bolt flange is too large to bolt to the stock cat/test pipe/or header) and it fit flawlessly. I was beyond impressed with the pricing too, AND I was able to decide on any muffler I wanted.
I'm in FL, I'd be down.
I'm in FL, I'd be down.
03-19-2012, 11:30 AM
#6
Well Mike(KTELLLER)will be keeping up with the post. I have sent him this link to watch. Not sure if he is on this forum.
8600RPM What system would you want if he made it?
8600RPM What system would you want if he made it?
03-19-2012, 11:36 AM
#7
Here is the list of possible kits and takers so far....
rush and 8600RPM what kits would you be interested in?
*TYPES OF POSSIBLE MANDREL DIY KITS*
-2.5" SINGLE EXHAUST PIPING KIT
-xjohnkdoex()
-PrecyseStylez()
-07ToSeXy()
-Greyout()
-3" SINGLE EXHAUST PIPING KIT
-2.5" DUEL EXHAUST PIPING KIT
-Vaikis_()
-NBPCL9Atl
-TSXpath()
-3" DUEL EXHAUST PIPING KIT
-IntegraGSR23()
rush and 8600RPM what kits would you be interested in?
*TYPES OF POSSIBLE MANDREL DIY KITS*
-2.5" SINGLE EXHAUST PIPING KIT
-xjohnkdoex()
-PrecyseStylez()
-07ToSeXy()
-Greyout()
-3" SINGLE EXHAUST PIPING KIT
-2.5" DUEL EXHAUST PIPING KIT
-Vaikis_()
-NBPCL9Atl
-TSXpath()
-3" DUEL EXHAUST PIPING KIT
-IntegraGSR23()
Trending Topics
04-07-2012, 01:02 PM
#12
Intermediate
Join Date: Mar 2010
Location: St. Charles Il
Age: 55
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Will these be fit on a TSX as they are built or in a jig?
I was thinking of doing this:
From the cat a, single pipe back to this muffler:
http://www.magnaflow.com/02product/s...=main&id=10000
Then out of the back (2), run 2.25" dual pipes all the way back to (2) individual mufflers.
Instead of the "Y" where we go through a single muffler first, and then go and split off to the (2) mufflers.
I thought this design would reduce some backpressure, this is a perf. core muffler, but my only question is if there is enough room in the tunnel to run (2) pipes next to each other. There may also be room to stagger (2) of these to further reduce noise:
http://www.magnaflow.com/02product/d...rtnumber=18125
Thoughts?
I was thinking of doing this:
From the cat a, single pipe back to this muffler:
http://www.magnaflow.com/02product/s...=main&id=10000
Then out of the back (2), run 2.25" dual pipes all the way back to (2) individual mufflers.
Instead of the "Y" where we go through a single muffler first, and then go and split off to the (2) mufflers.
I thought this design would reduce some backpressure, this is a perf. core muffler, but my only question is if there is enough room in the tunnel to run (2) pipes next to each other. There may also be room to stagger (2) of these to further reduce noise:
http://www.magnaflow.com/02product/d...rtnumber=18125
Thoughts?
04-10-2012, 07:57 PM
#13
Will these be fit on a TSX as they are built or in a jig?
I was thinking of doing this:
From the cat a, single pipe back to this muffler:
http://www.magnaflow.com/02product/s...=main&id=10000
Then out of the back (2), run 2.25" dual pipes all the way back to (2) individual mufflers.
Instead of the "Y" where we go through a single muffler first, and then go and split off to the (2) mufflers.
I thought this design would reduce some backpressure, this is a perf. core muffler, but my only question is if there is enough room in the tunnel to run (2) pipes next to each other. There may also be room to stagger (2) of these to further reduce noise:
http://www.magnaflow.com/02product/d...rtnumber=18125
Thoughts?
I was thinking of doing this:
From the cat a, single pipe back to this muffler:
http://www.magnaflow.com/02product/s...=main&id=10000
Then out of the back (2), run 2.25" dual pipes all the way back to (2) individual mufflers.
Instead of the "Y" where we go through a single muffler first, and then go and split off to the (2) mufflers.
I thought this design would reduce some backpressure, this is a perf. core muffler, but my only question is if there is enough room in the tunnel to run (2) pipes next to each other. There may also be room to stagger (2) of these to further reduce noise:
http://www.magnaflow.com/02product/d...rtnumber=18125
Thoughts?
Will pass your thought on to him..
Were still looking for interest people to add to the list. Leave a post on what you would be interested in getting made for your car.
04-27-2012, 05:34 PM
#15
only need ONE MORE interested buyer and i think were golden. Need 10-12 people and i have 9 on one of the thread on another forum.
Heel the world someone ^_^ lets get this K Teller Mandrel DIY Exhaust Kit going!!!
Heel the world someone ^_^ lets get this K Teller Mandrel DIY Exhaust Kit going!!!
06-09-2012, 05:31 AM
#18
there is another user added to the list...
All updates are on this link... CLICK HERE
Were still a go for the kit just need 8600RPM to contact me. PLEASE!!!
All updates are on this link... CLICK HERE
Were still a go for the kit just need 8600RPM to contact me. PLEASE!!!
Last edited by NBPCL9Atl; 06-09-2012 at 05:34 AM.
07-27-2012, 02:23 PM
#20
BUMP
Just got a email from him he has been working on it today so were a go for in the next few days to week or so. He wants to make sure its right so he isn't rushing it out. But anyone that is interested PLEASE CONTACT ME.
Just got a email from him he has been working on it today so were a go for in the next few days to week or so. He wants to make sure its right so he isn't rushing it out. But anyone that is interested PLEASE CONTACT ME.
Thread
Thread Starter
Forum
Replies
Last Post
ExcelerateRep
Sponsored Sales & Group Buys
8
01-06-2016 09:59 AM
ExcelerateRep
4G TL Performance Parts & Modifications
8
12-11-2015 12:58 PM
pistacio
2G TL (1999-2003)
10
09-26-2015 09:45 AM
