Installation of Acura Racing Pedals
#121
Slippy maybe...
Join Date: Mar 2005
Location: Hamilton, Ontario
Age: 47
Posts: 221
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by EuRTSX
My GOD. My fingers have been worked to the bone just to get the accelerator pedal off, and guess what, it's still not off. Jesus.
Here's a rundown of my experience tonight...
I tackled the brake pedal first, and other than having a bit of a challenge getting the drill holes started, it went relatively easy. It probably took the longest -- mainly because I was being cautious. Also, for you fellow 5AT members, you need to put some sort of filler or "rubber spacer" (as others have called it) in the middle of the pedal where it dips in. I took some 3M automotive mounting tape and tripled it up to make it flush with the surrounding metal. It seems to have done the trick, as the nubs do not recess into the pedal when you step on it.
Second was the dead pedal (or foot rest). I decided to take the dead pedal off to try it moda_way's method first... I am regretting doing that. I was taking it off to mount the dead pedal cover onto it. So I did that (using the short screws) and then proceeded to clip the dead pedal back in place. Unfortunately it didn't hold all that well. It seems that the plastic on the back of the dead pedal is a bit soft and the "spring" portion of the clips have lost their spring. I should have just left it in place and screwed the short screws into it.
So to solve the problem with the dead pedal, I first tried mounting just the new pedal to the spot where the old pedal was. I drilled holes into the floor just like moda_way had done with his and test fitted the pedal. It fit well enough, but the nubs were recessing into the aluminum -- I didn't like that. My next thought was, I'd use the longer screws provided and screw the combined dead pedal and cover to the floor. Unfortunately, the screws provided are just a wee bit too short (and, they're also Phillips heads which are notorious for stripping if you try to apply some force), so I'm going looking for some slightly longer screws -- perhaps even self-tapping screws -- tomorrow at the local auto parts store or Home Depot (and preferrably with a Robertson or Allen head on them).
All in all, I'm really happy with the pedals. There's some minor revisions required to the design -- specifically, the 5AT brake pedals... there should be some sort of additional rubber to make up for what the OEM rubber cover has on it -- but damn do they look good!
#126
Slippy maybe...
Join Date: Mar 2005
Location: Hamilton, Ontario
Age: 47
Posts: 221
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Supercomputers
Glad your Happy Ryan, Sorry I could not get you some help Sooner I did not see your post until Late. Enjoy them.
So everyone, here's my solution for the dead pedal issue. I ended up buying some plastic screw anchors, drilled the holes in the floor a bit larger, put the anchors in and then screwed everything down (OEM dead pedal, new dead pedal cover) using #8 x 2" flat head Robertson screws (yay Canada for Robertson screws!). Doing that took me about half an hour this evening after work. There's no way that dead pedal's coming free now.
And now for some photos:
#127
Again great pics. Guys just goes to show you what you can do. No matter how you decied to do the install the results and all the pics have been wonderfull.
Still sets No Logo Manual, TSX Logo Auto and Manual are in stock.
Thanks
Dave
Still sets No Logo Manual, TSX Logo Auto and Manual are in stock.
Thanks
Dave
#128
Guys Still have some Qty on all model but things are getting low again. Cant get another order filled until March 2007, If you want these get them now
Manual
Auto
Manual No Logo.
Thanks
Dave
Manual
Auto
Manual No Logo.
Thanks
Dave
#132
Intermediate
Join Date: Mar 2006
Location: Toronto, Ontario
Age: 43
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Supercomputers
Guys All version are still ready to ship!! Place your orders in today
TSX Manual and Auto with Logos
TSX Manual with No Logos all ready to ship
Thanks
Dave
TSX Manual and Auto with Logos
TSX Manual with No Logos all ready to ship
Thanks
Dave
#133
Just a Weekly Bump Let me know if anybody has any questions or needs anything. Some of the rare sets are getting low, Pedals with No Logos manual and Regular Manual.
Place your order today!
Place your order today!
#134
Adam Thanks for your order the pedals shipped out. Post some pics when you get them installed.
Guys jump on your set before they are gone, I dont think they will last the holiday and I want everybody from this forum who wants to get a set to get one.
I ship the day payment is received.
Thanks
Dave
Guys jump on your set before they are gone, I dont think they will last the holiday and I want everybody from this forum who wants to get a set to get one.
I ship the day payment is received.
Thanks
Dave
#135
Guys Running Low on all sets I dont think they will make Christmas
Still have
Acura Auto and Manual with Logos
and 5 sets left of TSX JDM Style No Logo.
I can get them our right away if you are intrested.
All Sets are 149.99 Delivered.
Still have
Acura Auto and Manual with Logos
and 5 sets left of TSX JDM Style No Logo.
I can get them our right away if you are intrested.
All Sets are 149.99 Delivered.
#137
Everybody, I just wanted to take the time out to wish all my customers and freinds a very Happy Thanksgiving. Spend time with your family and eat eat and eat. Just so you all know I will be out of town from 11/22-11/26 Any Race Pedals or Door sill orders that are placed between now and then will ship on 11/27. Quanity is getting low on all sets offered on Pedals and Sills, So put your order in if you are intrested in either. Also any orders that have been placed up to today have all been shipped. I will be checking my PM box thru the long weekend feel free to e-mail me any questions.
Thanks Everybody and Enjoy the Holiday!!!
Dave
Thanks Everybody and Enjoy the Holiday!!!
Dave
#138
boost owns
Installed my non-logo MT pedals today. It was kind of a pain in the ass, but only because a) I'm 6'3" 220lbs so moving around down in the footwell sucks and b) I've never done much drilling before so I was re-learning as I went along.
Dead pedal: easy as pie, screwed it right on top of the stocker. Done.
Got a couple of the small bolts in the clutch a bit crooked, because I goofed with the holes. It's hardly noticable though, and it's still sturdy.
I could not for the life of me get the accelerator pedal to unclip. So, I screwed the four holes with the pedal still mounted, and then shoved the four screws in. All attempts at getting nuts and washers on with the pedal still attached were failures. I ended up just leaving it as is, held in by the snug fit of the bolts in the holes. It works for now, but eventually I'd like to get them secured, if I can figure out the accelerator removal.
They look stock though, and feel great - I love them!
Dead pedal: easy as pie, screwed it right on top of the stocker. Done.
Got a couple of the small bolts in the clutch a bit crooked, because I goofed with the holes. It's hardly noticable though, and it's still sturdy.
I could not for the life of me get the accelerator pedal to unclip. So, I screwed the four holes with the pedal still mounted, and then shoved the four screws in. All attempts at getting nuts and washers on with the pedal still attached were failures. I ended up just leaving it as is, held in by the snug fit of the bolts in the holes. It works for now, but eventually I'd like to get them secured, if I can figure out the accelerator removal.
They look stock though, and feel great - I love them!
#139
Audio There a few detailed write ups on getting it off, Do a search and it should come up. There is a little clip on the pedal that you have to get loose, Its tuff to get it loose, But I you look thorught this thread I think somebody did a hand written diagram.
There are only 2 sets left on the Non-Logo 6MT Race Pedals.
There are only 2 sets left on the Non-Logo 6MT Race Pedals.
#140
Originally Posted by mg7726
what do you folks think about these combos for a TSX Auto:
1. No logo on just the gas pedal
2. No logo on footrest and gas pedal
or logo on all the pedals - Thanks!
1. No logo on just the gas pedal
2. No logo on footrest and gas pedal
or logo on all the pedals - Thanks!
Who makes these BTW? The title of this thread suggests that these are manufactured by Honda as an OEM product. My guess is that they are aftermarket and originate from somewhere like Taiwan...
#141
Actually they were designed and voted on by the members of this forum, They look much better how they are now layed out left to right, With ACURA being on the dead pedal. Some members like them with no logos there really is no mix and match I am just doing some members a favor. The pedals either come in Logo or No-Logo and they are Designed and made in Germany, Tooling comes from Taiwan. Over 70 + Sets installed on the TSX,
All models are getting low so if you want them grab a set now 149.99 Delivered.
All models are getting low so if you want them grab a set now 149.99 Delivered.
#142
Three Wheelin'
Installed mine today
Supercomputer was really fast on the shipping. I did the intall today, and I must say, it looks a lot easier then it is. Thanks to the instructions you guys posted, that helped a lot. Having the right tools is essential. As many of you have come to find out, there is a little dip in the middle of the brake pedal. I just cut the center of the old brake pad, and tirmed it a bit and that worked just great. for the dead pedal, I just found it very easy to use the eletic screwdriver and intall on top of the old pedal. I did manage to get the gas pedal off. Those of you who did the install without taken the gas pedal apart, my hat is off to you. I must say the pedals are of very good quality and look nice. Anyway, just wanted to tell my experience. Taken my time, it took me about an hour and a half.
#144
Three Wheelin'
Originally Posted by Supercomputers
Thanks dWEST I really appreciate the write up.
No problem and thanks for the fast shipping. Just one other benefit that no one has posted. These pedals really grip your shoe. There is no sliding here. Wherever you put your foot, it stays! There hs been a few times when my foot has sliped of of the brake pedal. Won't happen with these pedals.
#146
Three Wheelin'
Join Date: Sep 2003
Location: ALBUQUERQUE, NEW MEXICO
Age: 50
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
Hey Supercomputers, I wonder how many left on Logo MT pedal for TSX in stock? I know that 2 left of Non-Logo MT pedal. Let me know. I might be ordering thru the money order this Friday. I will see about it. I want to see Non-Logo pics, anyone???
#148
Everybody who ordered this week has already shipped. If you still want a set place an order I have MT, Auto and MT with No -Logo althought stock is getting real low. We still can deliver any order in plenty of time for Christmas just let me know all sets are 149.99 Delivered.
Thanks
Dave
Thanks
Dave
#150
Yea i just saw something i posted from before about dealer installation. But....
1. how easy is it to install?
2. I wear sandles a lot and when i do i always drive in my bare feet will these things get hot/cold?
3. Does anyone have any problems with them/ do you like them? Are they worth it?
4. Are they still in stock?....auto, 06 which prob. doesnt make a difference. Are there ones with TSX on them or something?
1. how easy is it to install?
2. I wear sandles a lot and when i do i always drive in my bare feet will these things get hot/cold?
3. Does anyone have any problems with them/ do you like them? Are they worth it?
4. Are they still in stock?....auto, 06 which prob. doesnt make a difference. Are there ones with TSX on them or something?
#151
All orders up to Today have been SHipped. If you want my Pedals or Door Sills before Christmas Please place your order via paypal no later then 12/21. I will SHip USPS Priority Mail and you will have your order in time for Christmas.
As of Right now we still have all versions of Peals and Door Sills in stock. Please remember to put what you want on your paypal payment.
Have a great week everybody and Happy Holidays!!!
Thanks
Dave
As of Right now we still have all versions of Peals and Door Sills in stock. Please remember to put what you want on your paypal payment.
Have a great week everybody and Happy Holidays!!!
Thanks
Dave
#154
Racer
Join Date: Jan 2005
Location: Colorado
Age: 56
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Supercomputers
Knox
Your Pics will be up next we are working on it.
Nice install Ryan Way to go They look Hot!!!
Your Pics will be up next we are working on it.
Nice install Ryan Way to go They look Hot!!!
Any one know where I can get these extra yummy cheapo?
#155
Just wanted to take the time out to wish everybody a Very happy holidays. Enjoy the time off and spend it with your familys. You have all been great this year and we really appreciated working with you. Stay tuned for some or the projects we are working on for 2007.
Just so everybody knows all sets that were ordered for Christmas should have been received today. Enjoy and Thank You!!
Just so everybody knows all sets that were ordered for Christmas should have been received today. Enjoy and Thank You!!