TinkySD

some vids of a guy with an rsx with icebox...sounds good. Not too loud but a nice snarl. The rsx has alot more growl than tsx stock so I think it will be nice for the tsx to make a little noise....

swami

I was thinking more of the eye candy thing. It's obviously a replacement for the stocker that's gotta be lighter and stronger. If it looks cooler than it's a no-brainer.

TinkySD

hah, forgot to include the link before

icebox vids on an rsx...here!

http://www.highredline.com/vids/rsx/


I miss a little intake snarl...not sure i want a complete open element filter though...they can get pretty intense. Actually what i'm worried about is the drive by wire system .... you have no idea how much the throttle is actually open so it might run really loud even at normal crusing.

Bear Trap

I really liked the icebox I put on my '01 Integra. It had some growl and didn't sound like a weedeater. My butt dyno showed some increase too. The headers really made a difference and I can't wait for them to be released for the TSX.

Bear Trap

I emaile Comptech asking if they had any dynos ready since their products were nearing release. Here's the reply:

"Not at this time. The cat back exhaust should be ready to go by early next month. Please check back or visit our website for new updates regarding parts for the TSX. Thanks."

At least they are making progress.

TinkySD

i also emailed them today asking for a representative to stop by the board and also about some of their prototype dynos ..i assume i'll probably get the same response back.. for comptech early next month probably = october...lol. I'm not gonna be touching the exhaust unless it's quiet + produces huge gains.(unlikely as the stock setup seems pretty good)

gogozy

is header unit comes at lower weight than stock unit? thanks..:P

AdamC

Can't wait... I'll take a rear sway bar if it's 22mm or greater.

swami

I just noticed something...I've looked at the pics of the cat-back system like 10 times and love it, and I want it. The TSX pictured has a body kit on it and the system still stands out. I'll never have the body kit and I'm concerned it'll look too rice. I'm 41 and that's not the look I'm goin for. Any opinions would be appreciated.

Iceman

The TSX is a) beautiful and b) rare. Who needs a body kit?

swami

Yeah...I know. That wasn't the question.

tony4311

What alot of people that dont want the muffler to stand out is to take some hi-temp flat black paint and paint the mufflers. That way only the tips are noticable and it still has a stock look to it.

kurt_bradley

Here's the link to Comptech's stuff for the TSX. Basically, it's a "Coming Soon" page with pretty good info.

http://solar.innercite.com/comptech/tsx.html

dabuda

When I added those components to the cart it's all free!!! jk, preorder only ...ohh cant wait till these are available

==============================================

Name Part # Each Total
Header Stainless Steel (2004 TSX) 210-060 $0.00 $0.00
Exhaust, Stainless Cat-Back (TSX) 230-050 $0.00 $0.00
Springs, Comptech Sport (2004 TSX) 110-155 $0.00 $0.00
Icebox Cold Air Intake (TSX) 330-135 $0.00 $0.00
Sub Total $0.00
Tax $0.00
-------------------------------------------------------------------------------

Total $0.00
Any changes above should be verified by pressing 'Recalculate' before clicking on 'Finalize this Order'.
Special Shipping Instructions

kurt_bradley

I'm impressed that they finally made a cat-back system. They've always had just axle-back exhausts for the RSX, TL, and CL. Those things don't add anything but sound. I'd like to see those guys post some dynos with the parts additionally.

TSXY

Damg those rims are EXPENSIVE!!!!! Over $700 a rim!!!!!!

97AcuraCL

God Bless Comptech.

Alin10123

Will headers just improve the torque and hp? Will i loose any hp/torque anywhere with a header upgrade? How hard are header upgrades to do? and will improved headers change the sound in any way?

Yui

We won't really know about the gains until the dynos are out... be patient!

Alin10123

I'm not being impatient. I was asking about headers in general on a 4 cylinder engine.

Maxboost

to tell you the truth NONE of us know if the new header is going to gains of loses WHP or TQ. it is acutally depends on how much money Honda is willing to sacrifiece while designing TSX exhaust system. if they are REALLY paying attention and spending a lot of time making our exhaust then i would highly doubt that most of the aftermarket exhaust will gain anything.
To me 2.4 litre NA 4 cyl is nothing much to squeeze out so personally i would expect any much of a gain...
then again my past experienced tell me that Honda always cheap out on their exhaust system.

joedokes

Comptech is now selling and shipping the sport springs and a rear sway bar.

Rear Sway Bar

Sport Springs


Hopefully they will have some dyno's for the icebox and headers.

Bear Trap

Thanks joedokes, I've got a Rear Sway Bar on the way!!! Now all I can say is HEADERS, HEADERS, HEADERS !!! DYNOS, DYNOS, DYNOS !!!

ricecake

I couldn't agree more. Dyno charts would be really helpful for those of us that want in on a little more of the aftermarket action. If we could get a read on performance, more of us would be more willing to pre-order, right?

The problem with buying the first generation of a model--you want the best out there, but since there is not enough demand to sustain large scale production, our per unit costs are higher. I am salivating over that header, though.