Would there be interest? TSX Replica
#722
T.DoT P.I.M.P. lol
Join Date: Dec 2005
Location: Toronto, Canada
Age: 41
Posts: 1,575
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by xizor
you can take off the spoiler with a little effort, just use dental floss to slice through the 3M tape. its easier when its warm and the tape is softer, takes about 5 min to seperate the tape and 10 to clean it up
#723
Senior Moderator
Originally Posted by Supershyguy
almost ready to become a vendor so I can sell it here. who should I talk to again?
#724
Originally Posted by chuson
I know it's possible to take off the 3M tape. But his M3 spoiler (so as my ducktail) use polyurethane to stuck on it. Do you know any method of taking it out??? I need it.
#725
Originally Posted by Reach
Private Message member "astro" to discuss becoming a site vendor. He is an administrator here.
as soon as I do that I will paypal him the vendor fees
#729
quick question
Hey guys I have a Acura TSX 2006, I plan to buy a CAI and Progressive Sway bar...But I want to look into a body kit, not sure what I should go with...and I'm not sure what fits, I would like to go with ShyGuy just to help him out, but I'm not sure if it will fit.
Thanks
Sorry, if it's an 'stupid' question...
Thanks
Sorry, if it's an 'stupid' question...
#730
Team Owner
Join Date: Feb 2006
Location: District of Corruption
Age: 36
Posts: 23,588
Received 105 Likes
on
69 Posts
Originally Posted by b|ack
Hey guys I have a Acura TSX 2006, I plan to buy a CAI and Progressive Sway bar...But I want to look into a body kit, not sure what I should go with...and I'm not sure what fits, I would like to go with ShyGuy just to help him out, but I'm not sure if it will fit.
Thanks
Sorry, if it's an 'stupid' question...
Thanks
Sorry, if it's an 'stupid' question...
The mugen lip kit you see above will not fit your 2006-2007 TSX.
Only the sideskirts will. The front lip will not fit, and the rear lip will not fit.
#732
Originally Posted by EuRTSX
The mugen lip kit you see above will not fit your 2006-2007 TSX.
Only the sideskirts will. The front lip will not fit, and the rear lip will not fit.
Only the sideskirts will. The front lip will not fit, and the rear lip will not fit.
the sides are the sexiest part of the bodykit anyways
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
#734
Instructor
Join Date: Dec 2005
Location: Raleigh, NC
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
that's all up to personal taste. the previous poster with all the cool pictures used oem and ssg's mugen kit on his car and it looks fine. and IMO...sideskirts dont really make a big difference. maybe ssg will make a kit for the 06 later since alot of people have been asking him to...but if not. I'd say get the legit one
looks great.
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
#738
Pro
Join Date: Oct 2004
Location: North Jersey
Age: 36
Posts: 625
Likes: 0
Received 0 Likes
on
0 Posts
I read on another forum that someone who has the front lip from you said that the passenger side of it doesnt exactly touch the car without some modification? Maybe I ready it wrong or something but is this still an issue
#740
T.DoT P.I.M.P. lol
Join Date: Dec 2005
Location: Toronto, Canada
Age: 41
Posts: 1,575
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by ABPTSX
I read on another forum that someone who has the front lip from you said that the passenger side of it doesnt exactly touch the car without some modification? Maybe I ready it wrong or something but is this still an issue
Bodyshop out there will install the lipkit for you but will not do any extra work unless you pay big bucks. The craftmanship on the lipkit is decent, and my mechanic said it's one of the best he had seen. There's a few edges need to sand down (make it a bit thinner) a bit to make it flow better.
Good work Peter, hurry up to become their vendor and make some good $$$ to cover your Mugen lipkit and Ducktail spoiler.
#741
Pro
Join Date: Oct 2004
Location: North Jersey
Age: 36
Posts: 625
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by chuson
Hey ABPTSX, that's me on the "other" forum who posted the comment. I did NOT said the passenger side DOESN'T touch the car. I'm referring to the upper edge on the passenger side. I've said it many times and will say it again, IF you sand/ primer the lip kit yourself, and install it yourself, you will NOT experience any problem.
Bodyshop out there will install the lipkit for you but will not do any extra work unless you pay big bucks. The craftmanship on the lipkit is decent, and my mechanic said it's one of the best he had seen. There's a few edges need to sand down (make it a bit thinner) a bit to make it flow better.
Good work Peter, hurry up to become their vendor and make some good $$$ to cover your Mugen lipkit and Ducktail spoiler.
Bodyshop out there will install the lipkit for you but will not do any extra work unless you pay big bucks. The craftmanship on the lipkit is decent, and my mechanic said it's one of the best he had seen. There's a few edges need to sand down (make it a bit thinner) a bit to make it flow better.
Good work Peter, hurry up to become their vendor and make some good $$$ to cover your Mugen lipkit and Ducktail spoiler.
#742
The fitment is really good. Trust me guys
here is a little story about myself (don't laugh)
when I was 20 years old, I got a replica kit, and it doesnt fit at all and it sucked cause back then $800 was a lot to me and I worked hard to save up. and I really wish that there will be a company out there that will make replicas that will fit perfectly and still would have a great price. (I waited for a couple of years and still couldnt trust any company out there so I started my own lol)
here is a little story about myself (don't laugh)
when I was 20 years old, I got a replica kit, and it doesnt fit at all and it sucked cause back then $800 was a lot to me and I worked hard to save up. and I really wish that there will be a company out there that will make replicas that will fit perfectly and still would have a great price. (I waited for a couple of years and still couldnt trust any company out there so I started my own lol)
#744
Instructor
Join Date: Apr 2006
Location: vancouver
Age: 39
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Supershyguy
The fitment is really good. Trust me guys
here is a little story about myself (don't laugh)
when I was 20 years old, I got a replica kit, and it doesnt fit at all and it sucked cause back then $800 was a lot to me and I worked hard to save up. and I really wish that there will be a company out there that will make replicas that will fit perfectly and still would have a great price. (I waited for a couple of years and still couldnt trust any company out there so I started my own lol)
here is a little story about myself (don't laugh)
when I was 20 years old, I got a replica kit, and it doesnt fit at all and it sucked cause back then $800 was a lot to me and I worked hard to save up. and I really wish that there will be a company out there that will make replicas that will fit perfectly and still would have a great price. (I waited for a couple of years and still couldnt trust any company out there so I started my own lol)
#748
i call dibs on 06 euro-r kit if you make one.
finished product looks great btw. i posted earlier in this thread and i was very skeptical but your work speaks for itself. looks good!
finished product looks great btw. i posted earlier in this thread and i was very skeptical but your work speaks for itself. looks good!
#749
where is my garage?!
iTrader: (2)
Join Date: Oct 2006
Location: nassau county, ny
Age: 46
Posts: 1,857
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by hyun
i call dibs on 06 euro-r kit if you make one.
finished product looks great btw. i posted earlier in this thread and i was very skeptical but your work speaks for itself. looks good!
finished product looks great btw. i posted earlier in this thread and i was very skeptical but your work speaks for itself. looks good!
fyi, the 'other forum' is trying to get a group buy for the euro-r kit from aj racing. it's probably cheaper than buying a replica and getting it painted. not to take anything away from supershy's work, b/c it looks fantastic.
#755
Team Owner
Join Date: Feb 2006
Location: District of Corruption
Age: 36
Posts: 23,588
Received 105 Likes
on
69 Posts
From the looks of it, he is not a vendor as of yet.
People, before you actually gauge interest and ask for the lips out there for the 2006, 2007 models, Supershyguy has stated once before that the 2006 EuroR lipkit is not worth making because it is already pretty cheap as it is (and even comes painted included with the price from boomplus/kingmotorsports) therefore unless you have 10 (dedicated) buyers for the full kit, don't expect it to be made.
This goes for any other kit, he needs to have at least 10 dedicated buyers for the full kit before he starts construction.
People, before you actually gauge interest and ask for the lips out there for the 2006, 2007 models, Supershyguy has stated once before that the 2006 EuroR lipkit is not worth making because it is already pretty cheap as it is (and even comes painted included with the price from boomplus/kingmotorsports) therefore unless you have 10 (dedicated) buyers for the full kit, don't expect it to be made.
This goes for any other kit, he needs to have at least 10 dedicated buyers for the full kit before he starts construction.