Hurleysurf24

SIZE: 18x8.
OFFSET: +38mm
BOLT PATTERN: 5x4.5 or 5X114.3

225/40/18

i know the tire diameter is off 5 but i dont think it will be noticeable on the 18" as it will still compensate the difference in the wheel itself

MADCAT

You need an offset of at least 45+

Lucid4000

It won't work. You need a minimum of +45offset. A +38 you will be sticking out past the fenders. Alot! You will rub on every turn and bump and it will just look plain stupid.

Hurleysurf24

hmmm you guys sure ... you know some things look good not flush with the fender ..... so couldnt i jsut get 7mm spacers?

Hurleysurf24

IDK my old car looked amazing with wheels out passed the fender .. i think without dish the wheels look like crap outside the fender but this is my old car

http://pegasus.cc.ucf.edu/~jo918993/...SHOTresize.jpg

i mean i think that looks great ...

REV-01

+38 with a 7mm spacer = +31 offset, add spacer doesn't mean adding the numbers

car_lost

not flush with the fender = rub on every bump and dip... especially if you are lwoered.

spacers push the wheel out more. thats why they are called spacers... they create more space between the brake calipers and the wheel. 5mm spacers on a +38 offset will make it a +33 offset.

Hurleysurf24

ahh gotcha my bad .... i forgot im not thinking to day lol

damn i was about to snatch an amazing deal on a set of bbs rx with tires 18" for 900 bucks

REV-01

you could buy wide rims with low offset, but make sure you buy skinny tires, stretch it jdm vip and drift syle

car_lost

yea but then you'd rub the lip of the wheel itself... i think that would be even less forgiving than if you were to rub on the tire.

sik-yet-slick-TL

will 235/40/18 work well on a 18 by 7.5 wheel