oulaw29

Anyone have insight into install of meth kits onto 09 RDX?

ivan_baez

I have methanol injection from my former vehicle installed on my RDX. the results were the following, I used my mechanic's computer scanner to measue the intake temp:

outside temp 30°C
intake temp during city driving ~50°C (varies)
intake temp during at WOT on highway drops from 50°C and stabilizes at 42°C
intake temp during at WOT with methanol on highway drops from 50°C and stabilizes at 21°C!!!

it compensates for the TMIC inefficency. the suv runs strong even in hot days.

Take care,

wspy

^ Yeah that's what I was thinking would be the result.
Also, if you are not using the FlashPro, I would use the smallest jet available

ivan_baez

I'm using a 250-350 HP jet. works just fine.

wspy

Nice, so how is your system activated?

And, did you notice any increase in mpg?

ivan_baez

it is pressure activated, single step, not progressive. Basically it starts injecting at WOT because I set it at 8psi or so.

I have not monitored nor care much for mpg, since methanol kicks in when I push the pedal to the metal, hahaha.

wspy

Ok good.

You got any pictures of the set up?
Where did you install the Meth tank?

ivan_baez

there are some pics on my cardomain page.

I used the windshield washer fluid tank for the methanol, I barely use it to clean the windshield anyway.

bfaucett

do you have any better pics? Only thing I saw was nozzle position. Where did you mount your pump?

ivan_baez

see attached pics: