BC Suspension- RDX Coilovers
#203
Instructor
Join Date: Aug 2007
Location: NYC~Brooklyn
Age: 39
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
I'm from brooklyn and the stock suspension on the RDX just falls apart (no composure) over the roads in some parts of NY as well as the 278. Especially in the rear. the stock rear suspension it's super hard on the RDX.
you mentioned the "rough ride". can you give us a more in depth comparison on the ride quality between stock vs bc coilovers?
AWESOME CAR BY THE WAY!
#204
Former Sponsor
iTrader: (1)
RE: Rear camber kit
I am pretty sure we can make or arrange to have something made here. We need an RDX here to take some measurements off of so we can send them off for production.
RE: Wings and stuff
We have a pretty extensive ability to make carbon and fiberglass parts in a very nice quality. We spoke with BigHatch about this during the install of his exhaust. We have some ideas right now we think you would all like to see.
I am pretty sure we can make or arrange to have something made here. We need an RDX here to take some measurements off of so we can send them off for production.
RE: Wings and stuff
We have a pretty extensive ability to make carbon and fiberglass parts in a very nice quality. We spoke with BigHatch about this during the install of his exhaust. We have some ideas right now we think you would all like to see.
#206
Instructor
ZeroGravity, awesome to know that someone on this board is from NYC and has installed the BC coilovers on the RDX.
I'm from brooklyn and the stock suspension on the RDX just falls apart (no composure) over the roads in some parts of NY as well as the 278. Especially in the rear. the stock rear suspension it's super hard on the RDX.
you mentioned the "rough ride". can you give us a more in depth comparison on the ride quality between stock vs bc coilovers?
AWESOME CAR BY THE WAY!
I'm from brooklyn and the stock suspension on the RDX just falls apart (no composure) over the roads in some parts of NY as well as the 278. Especially in the rear. the stock rear suspension it's super hard on the RDX.
you mentioned the "rough ride". can you give us a more in depth comparison on the ride quality between stock vs bc coilovers?
AWESOME CAR BY THE WAY!
thanks for the compliment... I recently adjusted mines to be softer and the ride in my opinion feels better than stock. of course when you hit a pot hole it does feel a bit more than stock but in general the ride to me is better now that I soften it up a bit.
Sorry if this sound contradicting LOL
#210
Instructor
RE: Rear camber kit
I am pretty sure we can make or arrange to have something made here. We need an RDX here to take some measurements off of so we can send them off for production.
RE: Wings and stuff
We have a pretty extensive ability to make carbon and fiberglass parts in a very nice quality. We spoke with BigHatch about this during the install of his exhaust. We have some ideas right now we think you would all like to see.
I am pretty sure we can make or arrange to have something made here. We need an RDX here to take some measurements off of so we can send them off for production.
RE: Wings and stuff
We have a pretty extensive ability to make carbon and fiberglass parts in a very nice quality. We spoke with BigHatch about this during the install of his exhaust. We have some ideas right now we think you would all like to see.
By any chance do you have pictures of what one of your rear wing would look like?. In one of my post I posted pictures of the Porsche Cayenne rear wing which in my opinion looks aggressive and sportish which I like.
#212
^ that wouldnt be bad.. something like a duck bill would be good would love to see something for the front end of a 10-12 rdx done since there are no lip kits for them
#214
RE: Rear camber kit
I am pretty sure we can make or arrange to have something made here. We need an RDX here to take some measurements off of so we can send them off for production.
RE: Wings and stuff
We have a pretty extensive ability to make carbon and fiberglass parts in a very nice quality. We spoke with BigHatch about this during the install of his exhaust. We have some ideas right now we think you would all like to see.
I am pretty sure we can make or arrange to have something made here. We need an RDX here to take some measurements off of so we can send them off for production.
RE: Wings and stuff
We have a pretty extensive ability to make carbon and fiberglass parts in a very nice quality. We spoke with BigHatch about this during the install of his exhaust. We have some ideas right now we think you would all like to see.
The following users liked this post:
BU (05-23-2012)
#219
Ok here you go I was told it should go down more about 3/4 of inch more and if not not happy with that we can can go lower with no problems they told me to give it a week or so and I added the front spoiler .
The following users liked this post:
zerogravity (05-24-2012)
#220
Instructor
^ wow you really went low! I would have to roll my fenders to go that low. I always loved that color on the rdx. I am loving how we RDX enthusiast stepping it up! I waited almost 2yrs for this lol. Hopefully it doesn't stop here
#222
Instructor
Thread Starter
Congrats Crazycated, enjoy in good health.
You can put on some wheel spacers to push out your wheels.
She is looking good. How do you like the handling?
Once you guys get used to your improved handling and start to get the itch for even better handling then please visit the "rear sway bar" thread and lets see if we can't get us a bigger rear sway bar.
You can put on some wheel spacers to push out your wheels.
She is looking good. How do you like the handling?
Once you guys get used to your improved handling and start to get the itch for even better handling then please visit the "rear sway bar" thread and lets see if we can't get us a bigger rear sway bar.
#224
Instructor
Thread Starter
I installed the Eibach front camber bolts, washed the car (finally) and took some pics.
I am counting only four of us who got these BC coilovers. BU, Zerogravity, Crazycated, and me. Anyone else getting a set?
I am counting only four of us who got these BC coilovers. BU, Zerogravity, Crazycated, and me. Anyone else getting a set?
#226
Instructor
UPDATE!!!
OK I been playing around with the suspension... and decided to adjust it to soft.. and wow I must say this suspension is awesome! although a little jumpy it feels very close to stock and what I mean with that is you barely feel the potholes and bumps like you would with the suspension set on hard. Definitely a must have MOD! I get many compliments and even get pulled over by the Honda crew for questions LOL. mzhao84 jump on these. I am very satisfied with my purchase plus this is the only option we RDXers have ... If you want you can come over to the Bronx and I'll show you how it rides.
OK I been playing around with the suspension... and decided to adjust it to soft.. and wow I must say this suspension is awesome! although a little jumpy it feels very close to stock and what I mean with that is you barely feel the potholes and bumps like you would with the suspension set on hard. Definitely a must have MOD! I get many compliments and even get pulled over by the Honda crew for questions LOL. mzhao84 jump on these. I am very satisfied with my purchase plus this is the only option we RDXers have ... If you want you can come over to the Bronx and I'll show you how it rides.
The following users liked this post:
zerogravity (06-03-2012)
#229
Instructor
Join Date: Aug 2007
Location: NYC~Brooklyn
Age: 39
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
this is definitely something i'm going to be getting in the near, very near future. my car has almost 66k and i feel it's almost time for upgrading. i'll definitely post up pics of the car when I do get them BC coilovers!
#230
2008 Acura RDX
Join Date: May 2008
Location: Jamaica W.I.
Age: 61
Posts: 1,227
Likes: 0
Received 58 Likes
on
48 Posts
I want to get these also but I really want to have the rear camber to be put back into limits after the install....and there are no aftermarket camber adjustment bolts available for the rear as yet!..........Dilemma
#231
Instructor
Thread Starter
wspy,
1 degree extra in the rear is not that bad, at that... Heel toe mentioned he can make the rear camber adjustable arm.
Heel Toe, will you make us an adjustable camber arm?
1 degree extra in the rear is not that bad, at that... Heel toe mentioned he can make the rear camber adjustable arm.
Heel Toe, will you make us an adjustable camber arm?
#235
Instructor
Thread Starter
I have a potential fabricator who can make us a chamber adjustable rear suspension arm.
How many people would be interested in this product?
If interested at what price point?
How many people would be interested in this product?
If interested at what price point?
#236
Yes, Yes, Yes, Yes
Just base on price range from Ingalls & SPC in other Acura models
would love to be $200-250 for Independent Fabricator producing small batch ?
Just my estimate
Just base on price range from Ingalls & SPC in other Acura models
would love to be $200-250 for Independent Fabricator producing small batch ?
Just my estimate