3" Exhaust Open!
02-13-2015, 09:56 AM
#1
Drifting
Thread Starter
3" Exhaust Open!
Ok. I knew there were no companies out there with a 3" exhaust for the RDX, so I had one made. I wonder why there are none.. The car doesn't sound very loud at all with the 3" and I'm sure with a cat it would be even more quiet. Well I'll say this, if a company ever develops a 3" exhaust I would gladly be their first customer. I wouldn't be butt hurt if they even made a titanium exhaust..
Last edited by KenB350z; 02-13-2015 at 09:59 AM.
02-13-2015, 10:46 AM
#3
Drifting
Thread Starter
02-13-2015, 11:01 AM
#6
church auto use to do a full 3 inch exhaust but they are made to order and not sure they do it anymore.. they are super heavy too since they do dual
02-13-2015, 11:15 AM
#7
oh and to add i believe you can have the ATLP exhaust done as a 3 but thats made to order too you would have to ask marcus at heeltoe to be sure..
Trending Topics
02-13-2015, 11:46 AM
#8
Drifting
Thread Starter
02-13-2015, 11:50 AM
#9
Drifting
Thread Starter
02-13-2015, 12:36 PM
#12
Drifting
Thread Starter
I paid around 750.00 for the one in the picture from a local exhaust shop. But, the pipes are rusting and getting discolored. Just wondering what a big company can do.
02-13-2015, 01:29 PM
#14
Drifting
Thread Starter
02-13-2015, 03:37 PM
#15
02-13-2015, 04:03 PM
#16
Drifting
Thread Starter
02-13-2015, 04:13 PM
#17
Not sure, they made one for my Mazdaspeed6, with only about 10k imported. Why wouldn't they want to make one for the first gen RDX which sold over 100K units in the US. Maybe you can be the proto.
Heck, just looked it up. They make one for the ridgeline. If we show interest, I'm sure we could get one made.
Heck, just looked it up. They make one for the ridgeline. If we show interest, I'm sure we could get one made.
Last edited by Nachtsturm; 02-13-2015 at 04:15 PM.
02-13-2015, 04:31 PM
#18
Drifting
Thread Starter
Not sure, they made one for my Mazdaspeed6, with only about 10k imported. Why wouldn't they want to make one for the first gen RDX which sold over 100K units in the US. Maybe you can be the proto.
Heck, just looked it up. They make one for the ridgeline. If we show interest, I'm sure we could get one made.
Heck, just looked it up. They make one for the ridgeline. If we show interest, I'm sure we could get one made.
I'll try calling. Hopefully they'll be up for making a 3" exhaust.
02-13-2015, 06:36 PM
#19
@N1h1|1ty It was Philip at JPG Exhaust Inc.
This is what he sent me in reply when I asked what it would cost for a full 3" and he suggested I come in and take a listen to their various mufflers so I could choose one.
"
Hi Matt;
We can custom a cat back system for around $800 to $900 depending on muffler & tips. System will be stainless. We can also replace the second cat with a high flow one for $250 plus tax. We suggest that when it comes to muffler, the best way is for you to hear it before installation. We will select a few for you to hear. Please call (905) 339-0317 for appointment.
Thnks
Philip
"
Mind you the date on this email is 11/09/2012 hahaha so prices may have changed a bit
This is what he sent me in reply when I asked what it would cost for a full 3" and he suggested I come in and take a listen to their various mufflers so I could choose one.
"
Hi Matt;
We can custom a cat back system for around $800 to $900 depending on muffler & tips. System will be stainless. We can also replace the second cat with a high flow one for $250 plus tax. We suggest that when it comes to muffler, the best way is for you to hear it before installation. We will select a few for you to hear. Please call (905) 339-0317 for appointment.
Thnks
Philip
"
Mind you the date on this email is 11/09/2012 hahaha so prices may have changed a bit
02-13-2015, 07:03 PM
#20
Drifting
Thread Starter
@N1h1|1ty It was Philip at JPG Exhaust Inc.
This is what he sent me in reply when I asked what it would cost for a full 3" and he suggested I come in and take a listen to their various mufflers so I could choose one.
"
Hi Matt;
We can custom a cat back system for around $800 to $900 depending on muffler & tips. System will be stainless. We can also replace the second cat with a high flow one for $250 plus tax. We suggest that when it comes to muffler, the best way is for you to hear it before installation. We will select a few for you to hear. Please call (905) 339-0317 for appointment.
Thnks
Philip
"
Mind you the date on this email is 11/09/2012 hahaha so prices may have changed a bit
This is what he sent me in reply when I asked what it would cost for a full 3" and he suggested I come in and take a listen to their various mufflers so I could choose one.
"
Hi Matt;
We can custom a cat back system for around $800 to $900 depending on muffler & tips. System will be stainless. We can also replace the second cat with a high flow one for $250 plus tax. We suggest that when it comes to muffler, the best way is for you to hear it before installation. We will select a few for you to hear. Please call (905) 339-0317 for appointment.
Thnks
Philip
"
Mind you the date on this email is 11/09/2012 hahaha so prices may have changed a bit
02-13-2015, 08:31 PM
#24
RDX faN BoY
I am also going to have a custom 3" mid pipe. My stock muffler is pretty loud and the catless dp and no resonators it should sound a little better. I talked to atlp to make a 3" they said the 2.5 is good for 400hp and he told me to run a exhaust dump hah.. I want a 3in mid pipe damn it no resonators.
02-13-2015, 08:41 PM
#25
Drifting
Thread Starter
I am also going to have a custom 3" mid pipe. My stock muffler is pretty loud and the catless dp and no resonators it should sound a little better. I talked to atlp to make a 3" they said the 2.5 is good for 400hp and he told me to run a exhaust dump hah.. I want a 3in mid pipe damn it no resonators.
02-13-2015, 09:38 PM
#26
Drifting
Thread Starter
See, it was clean when I first got it! I guess that happens over time with weather and stuff. Going to have to make it a summer car...
02-14-2015, 12:28 PM
#29
Drifting
Thread Starter
Magnaflow, keep in mind I got the exhaust in '12 and it is now '15. No leaks, everything sounds good. Like I said, I just want a big company to step up and get an exhaust going. Possible Titanium...
02-14-2015, 04:33 PM
#31
Drifting
Thread Starter
My current exhaust has mandrel bends, it's just not stainless.
02-14-2015, 08:22 PM
#32
true but its not big single sections that bolt together with V-bands or spring flanges or whatever. I'm hoping that if I take mine to them they will have nice V-band stuff. and I want a loud muffler and a quiet muffler too. for those days where I want people to look and the days where I don't want the added attention from law enforcement.
02-14-2015, 09:02 PM
#33
Drifting
Thread Starter
true but its not big single sections that bolt together with V-bands or spring flanges or whatever. I'm hoping that if I take mine to them they will have nice V-band stuff. and I want a loud muffler and a quiet muffler too. for those days where I want people to look and the days where I don't want the added attention from law enforcement.
02-21-2015, 07:20 AM
#36
richard cranium
custom exhuast
Had a 3 inch custom turbo back done. All stainless steel. One center resonator and rear muffler . Used 2 v-bands , one in front after flex pipe for the front section . The other in rear for the muffler. All custom hangers and tips. Sounds amazing , like g35 but deeper. Nick from ELITEJDM.COM made it , check him out !
02-21-2015, 12:36 PM
#37
Drifting
Thread Starter
Had a 3 inch custom turbo back done. All stainless steel. One center resonator and rear muffler . Used 2 v-bands , one in front after flex pipe for the front section . The other in rear for the muffler. All custom hangers and tips. Sounds amazing , like g35 but deeper. Nick from ELITEJDM.COM made it , check him out !
03-05-2015, 10:36 AM
#39
Pics need to be posted or it never happened... Rules of the forum =)
03-06-2015, 04:27 PM
#40
Drifting
Thread Starter