How do I start the factory stereo test mode?
08-12-2020 | 06:49 PM
#1
Thread Starter
Intermediate
Joined: Aug 2014
Posts: 45
Likes: 3
How do I start the factory stereo test mode?
I came across a reference to the audio system having a diagnostic/test mode but I haven't been able to find out how to start it. Anyone know? FWIW I've got an 07 Tech.
Thanks,
N
Thanks,
N
The following users liked this post:
RRK0818 (08-13-2020)
08-16-2020 | 01:32 PM
#2
Qualified Observer
Joined: Oct 2019
Posts: 150
Likes: 24
From: In the woods, in the Mitten
FWIW, my FSM says this:
1. Turn the ignition switch to ACC (I) or ON (II)
2. Push and hold the "No. 1" and "No. 6" buttons. While holding the buttons, push the "PWR" knob to ON. Release the buttons and the self-diagnostic function will begin.
I got the service manual online somewhere; you should be able to find a copy if you look.
1. Turn the ignition switch to ACC (I) or ON (II)
2. Push and hold the "No. 1" and "No. 6" buttons. While holding the buttons, push the "PWR" knob to ON. Release the buttons and the self-diagnostic function will begin.
I got the service manual online somewhere; you should be able to find a copy if you look.
Thread
Thread Starter
Forum
Replies
Last Post
alex40169
Audio, Video, Electronics & Navigation
2
03-27-2011 08:47 PM