Turbo CL Part Out
#1
A-CL Totaled Member
Thread Starter
Join Date: Feb 2003
Location: Ellicott City, Maryland
Age: 37
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
Turbo CL Part Out
Mods - Please leave this here until Thursday - I only have 3 days to part out before going back to school.
As my CL was totaled, I will be parting out anything sellable from my car including all turbo related parts. Its a 1998 Primrose with H22 turbo setup. The block is built and its got the M2B4 tranny with LSD. All body damage was done to the passenger side. Let me know what you want and I will let you know if I can pull it in time and a price. Post right in the thread or PM me.
As my CL was totaled, I will be parting out anything sellable from my car including all turbo related parts. Its a 1998 Primrose with H22 turbo setup. The block is built and its got the M2B4 tranny with LSD. All body damage was done to the passenger side. Let me know what you want and I will let you know if I can pull it in time and a price. Post right in the thread or PM me.
#3
i need one spring from the bumper turn signal
ill take the center console too.. all plastic, wood, everything.. right to the back ashtray.
how is the grill? if that's okay, i'll take that
oh.. and the rectangular plastic on the front of the engine that says "A 3.0 VTEC"
ill take the center console too.. all plastic, wood, everything.. right to the back ashtray.
how is the grill? if that's okay, i'll take that
oh.. and the rectangular plastic on the front of the engine that says "A 3.0 VTEC"
#6
A-CL Totaled Member
Thread Starter
Join Date: Feb 2003
Location: Ellicott City, Maryland
Age: 37
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
rear bumper has some paint chips and would be a non-shipping item.
probably cant ship the trunk lid but i'll look into it.
dont have the 3.0 plastic as it was a 2.3 with a 2.2 in it.
i'll get pictures of all the other stuff when i get the car towed in from the body shop.
probably cant ship the trunk lid but i'll look into it.
dont have the 3.0 plastic as it was a 2.3 with a 2.2 in it.
i'll get pictures of all the other stuff when i get the car towed in from the body shop.
#7
Originally Posted by shnee420
i need one spring from the bumper turn signal
ill take the center console too.. all plastic, wood, everything.. right to the back ashtray.
how is the grill? if that's okay, i'll take that
oh.. and the rectangular plastic on the front of the engine that says "A 3.0 VTEC"
ill take the center console too.. all plastic, wood, everything.. right to the back ashtray.
how is the grill? if that's okay, i'll take that
oh.. and the rectangular plastic on the front of the engine that says "A 3.0 VTEC"
forgot about the console.
if he doesn't get it, i got dibs
Trending Topics
#8
where is....
did you have an aftermarket exhaust? or do you still have your stock tips??
dibs on stock tips and i also need 1 button from the dome light and stock floormats.
dibs on stock tips and i also need 1 button from the dome light and stock floormats.
#12
where is....
Originally Posted by suprachica79
What color floor mats do you have? I need some new ones bad... also could use the cup holder..
#16
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Is the front bumper cover still intact? What about interior parts? lemme know
#26
where is....
Originally Posted by starboy2nv
damn... SAVAGES!
werd price on full motor with list of goodies done to it
werd price on full motor with list of goodies done to it
#30
Senior Moderator
hey i called dibs on the motor setup in the 1st thread about the crash!!! damn vultures...whats the price on the full h22-T setup?
#34
do you got the light cover for the drivers side door interior and also the plastic seatbelt cover dat attaches near da top on da drivers side if you got a black interior that is. If so i got dibs on dat.
#35
Bagel Bomber
Originally Posted by xrunner86x
Im off to work - i'll post an update on pricing/availabilty tonight.
#38
A-CL Totaled Member
Thread Starter
Join Date: Feb 2003
Location: Ellicott City, Maryland
Age: 37
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
Sixfifty:
Sorry, I cannot ship the rear bumper
Shnee:
Center console as in the arm rest and fake wood trim?
Spring not a problem
Grill seems to be turning a greenish color, you should see it first
Can you pick up Wednesday?
Bebop.fey:
Sorry, I cannot ship the trunk
Sorry, I am not selling the head separately
Precision SC6031 turbo - $500
Drag manifold - $200
Intercooler is a Spearco, 23 length overall, black paint
Cat nope
AznXTL:
Exhaust ruined
Dome light button will try to get to it
Floor mats only have driver and 2 rear, charcoal, $30
Zguy95135:
Sorry, I cannot ship the hood
Honda3x23:
I think Im going to sell the car with the motor and tranny in it for $3000obo.
Complete turbo setup: Hondata ECU, wiring harness, 550cc fuel injectors with clips, FPR, Crane Cams ignition, NGK wires, Spearco intercooler, Drag manifold, Precision turbo, charge piping, wastegate w/ dump tube, blow off valve, downpipe, air filter, couplers, clamps $2000obo. as is.
97BlackAckCL:
Interior is fine
Bumper cover not in good condition
SupraManAG:
No HIDs (PIAA bulbs though)
Stock suspension
Silentknight1:
Passenger side headlight is damaged
Driver side headlight is available
Tiendollaz:
Sorry, I cannot ship the sideskirts
Integgi:
Tail light cover $10 shipped?
DaInFaMMus1:
Whole car as is $5000
Blenz:
Wastegate - $80
Intercooler - $70
Cold piping - $100
Spiderman3098:
Light cover and seatbelt cover $10 shipped
Mach30SiR:
Its a 98
972xghost:
PSPEC short shifter $50 shipped
FULLRACE:
Downpipe - $100
Shifter - $50 shipped
Wastegate - $80
I would prefer to ship to as few people as possible due to the fact I have to go back to college in 2 days. Therefore, if someone wants to buy the whole turbo setup they take priority over individual parts. I will wait until Wednesday to see if there is a buyer for the whole setup, then start parting the kit out.
PM me if you agree to listed pricing and I will give payment information. Parts will be pulled on Wednesday and shipped by Thursday if payment is received.
Sorry, I cannot ship the rear bumper
Shnee:
Center console as in the arm rest and fake wood trim?
Spring not a problem
Grill seems to be turning a greenish color, you should see it first
Can you pick up Wednesday?
Bebop.fey:
Sorry, I cannot ship the trunk
Sorry, I am not selling the head separately
Precision SC6031 turbo - $500
Drag manifold - $200
Intercooler is a Spearco, 23 length overall, black paint
Cat nope
AznXTL:
Exhaust ruined
Dome light button will try to get to it
Floor mats only have driver and 2 rear, charcoal, $30
Zguy95135:
Sorry, I cannot ship the hood
Honda3x23:
I think Im going to sell the car with the motor and tranny in it for $3000obo.
Complete turbo setup: Hondata ECU, wiring harness, 550cc fuel injectors with clips, FPR, Crane Cams ignition, NGK wires, Spearco intercooler, Drag manifold, Precision turbo, charge piping, wastegate w/ dump tube, blow off valve, downpipe, air filter, couplers, clamps $2000obo. as is.
97BlackAckCL:
Interior is fine
Bumper cover not in good condition
SupraManAG:
No HIDs (PIAA bulbs though)
Stock suspension
Silentknight1:
Passenger side headlight is damaged
Driver side headlight is available
Tiendollaz:
Sorry, I cannot ship the sideskirts
Integgi:
Tail light cover $10 shipped?
DaInFaMMus1:
Whole car as is $5000
Blenz:
Wastegate - $80
Intercooler - $70
Cold piping - $100
Spiderman3098:
Light cover and seatbelt cover $10 shipped
Mach30SiR:
Its a 98
972xghost:
PSPEC short shifter $50 shipped
FULLRACE:
Downpipe - $100
Shifter - $50 shipped
Wastegate - $80
I would prefer to ship to as few people as possible due to the fact I have to go back to college in 2 days. Therefore, if someone wants to buy the whole turbo setup they take priority over individual parts. I will wait until Wednesday to see if there is a buyer for the whole setup, then start parting the kit out.
PM me if you agree to listed pricing and I will give payment information. Parts will be pulled on Wednesday and shipped by Thursday if payment is received.
#40
I have a 97 and would rather have the 98-99 console
So, I'm talking about all of this
I may only need from below the climate control to just after the shifter (before cupholder), but I'm not sure how it all matches up exactly.
I don't need the radio or shifter, I basically just want the casing so I can have the full woodgrain instead of my little black square.
I'm actually getting my CV boot and motor mount fixed during the day Weds, and then I work from 5-late.
Though if that's the only time you could do this, I may just take off work.
During the day Thurs would be much better.
So, I'm talking about all of this
I may only need from below the climate control to just after the shifter (before cupholder), but I'm not sure how it all matches up exactly.
I don't need the radio or shifter, I basically just want the casing so I can have the full woodgrain instead of my little black square.
I'm actually getting my CV boot and motor mount fixed during the day Weds, and then I work from 5-late.
Though if that's the only time you could do this, I may just take off work.
During the day Thurs would be much better.