New CL lip
#402
Instructor
Join Date: Feb 2005
Location: MIAMI,FL
Age: 42
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Speed_N_Stylez_JL
It really depends on how much interest we get on the front lips from the CL community. If theres enough interest there will definitely be a rear lip coming as well as sideskirts....
#403
fear and Loathing
Join Date: Jul 2005
Location: Coventry, RI
Age: 39
Posts: 2,773
Likes: 0
Received 0 Likes
on
0 Posts
Major fitment issues with the Lip !!!!!!!!!!!!!!!!!!!!!!!!!!!
The lip can only be screwed in on the sire in the wheel well. there is no way to screw it in in the front. The lip has fallen off my car 3 times on nthe way home from my shop saturday morning. When i got home i took the lip off and applied 2 more layers of 3M duble sidded tgape. i drove arround with it all last night and i am going on a cruise today with cats from my area. i will let you guys know details later. i hope it doesnt blow off on the highway. Also with my car dropped i can not even fit a sida can on its side under my lip. if you hit anything you are screwed. but i do enjoy it nontheless
The lip can only be screwed in on the sire in the wheel well. there is no way to screw it in in the front. The lip has fallen off my car 3 times on nthe way home from my shop saturday morning. When i got home i took the lip off and applied 2 more layers of 3M duble sidded tgape. i drove arround with it all last night and i am going on a cruise today with cats from my area. i will let you guys know details later. i hope it doesnt blow off on the highway. Also with my car dropped i can not even fit a sida can on its side under my lip. if you hit anything you are screwed. but i do enjoy it nontheless
#405
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Damn, that sux you can't mount it better, i don't think the 3m tape will work. Sounds like it'll need molded.
#409
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by ShavedH22CL
My old lip is in about 100 pieces on I-95
#411
Cruisin'
Join Date: Mar 2006
Location: L P SO CAL
Age: 37
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ShavedH22CL
Major fitment issues with the Lip !!!!!!!!!!!!!!!!!!!!!!!!!!!
The lip can only be screwed in on the sire in the wheel well. there is no way to screw it in in the front. The lip has fallen off my car 3 times on nthe way home from my shop saturday morning. When i got home i took the lip off and applied 2 more layers of 3M duble sidded tgape. i drove arround with it all last night and i am going on a cruise today with cats from my area. i will let you guys know details later. i hope it doesnt blow off on the highway. Also with my car dropped i can not even fit a sida can on its side under my lip. if you hit anything you are screwed. but i do enjoy it nontheless
The lip can only be screwed in on the sire in the wheel well. there is no way to screw it in in the front. The lip has fallen off my car 3 times on nthe way home from my shop saturday morning. When i got home i took the lip off and applied 2 more layers of 3M duble sidded tgape. i drove arround with it all last night and i am going on a cruise today with cats from my area. i will let you guys know details later. i hope it doesnt blow off on the highway. Also with my car dropped i can not even fit a sida can on its side under my lip. if you hit anything you are screwed. but i do enjoy it nontheless
Regarding the sides and rear like stated earlier by James if there is enough interest in the front then sides and a rear will definitely be on their way to match is this is the first time ABS has made a lip for the CL.
PM me or reply with any further questions, concerns, or comments guys.
-Omar
#412
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by Speed N Stylez
Wow that is crazy/weird. When you came home from the bodyshop did they apply and double-sided tape along the middle of the lip where there are no screws? If so then there shouldn't be a problem, our test-car still has it on sine they day we installed it and he has reported absoultely no problems. I am sorry to hear that happened to you, is your car ok?
Regarding the sides and rear like stated earlier by James if there is enough interest in the front then sides and a rear will definitely be on their way to match is this is the first time ABS has made a lip for the CL.
PM me or reply with any further questions, concerns, or comments guys.
-Omar
Regarding the sides and rear like stated earlier by James if there is enough interest in the front then sides and a rear will definitely be on their way to match is this is the first time ABS has made a lip for the CL.
PM me or reply with any further questions, concerns, or comments guys.
-Omar
#413
fear and Loathing
Join Date: Jul 2005
Location: Coventry, RI
Age: 39
Posts: 2,773
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Speed N Stylez
Wow that is crazy/weird. When you came home from the bodyshop did they apply and double-sided tape along the middle of the lip where there are no screws? If so then there shouldn't be a problem, our test-car still has it on sine they day we installed it and he has reported absoultely no problems. I am sorry to hear that happened to you, is your car ok?
Regarding the sides and rear like stated earlier by James if there is enough interest in the front then sides and a rear will definitely be on their way to match is this is the first time ABS has made a lip for the CL.
PM me or reply with any further questions, concerns, or comments guys.
-Omar
Regarding the sides and rear like stated earlier by James if there is enough interest in the front then sides and a rear will definitely be on their way to match is this is the first time ABS has made a lip for the CL.
PM me or reply with any further questions, concerns, or comments guys.
-Omar
#417
Suzuka Master
i sense some anger from you young one.
i had a feeling that this thing wouldnt gonna hold up very good from the pictures. there in no support or spot to hold up the middle of the lip.
Shave, good luck finding a way to mount that, then let us know what you did.
i had a feeling that this thing wouldnt gonna hold up very good from the pictures. there in no support or spot to hold up the middle of the lip.
Shave, good luck finding a way to mount that, then let us know what you did.
#419
fear and Loathing
Join Date: Jul 2005
Location: Coventry, RI
Age: 39
Posts: 2,773
Likes: 0
Received 0 Likes
on
0 Posts
I have found a way. it is on damn good. I went on a cruise yesterday and went up to 100mph. its solid now. im just saying when u get this mount it damn goof. let it sit for a while with the tape on lots of tape. 2 tapping screws in each wheel well also.
1. Wash the bottom of your bumper. (only need to know that if ur a noob)
2. Apply one layer of tape across the whole inner part of lip.
3. apply 1 more layer.
A. Drill 2 holes in each wheel well throut where the lip goes through the bumper. then screw 2 tapping screws in each side.
4. make sure the lip fits in the grove between your stock lip thing and bumper.
5. Let it sit for a while and get a good stick.
With this method i ahve tested up to 100MPH and help perfect.
1. Wash the bottom of your bumper. (only need to know that if ur a noob)
2. Apply one layer of tape across the whole inner part of lip.
3. apply 1 more layer.
A. Drill 2 holes in each wheel well throut where the lip goes through the bumper. then screw 2 tapping screws in each side.
4. make sure the lip fits in the grove between your stock lip thing and bumper.
5. Let it sit for a while and get a good stick.
With this method i ahve tested up to 100MPH and help perfect.
#421
Nom Nom Nom Nom
Originally Posted by ShavedH22CL
I have found a way. it is on damn good. I went on a cruise yesterday and went up to 100mph. its solid now. im just saying when u get this mount it damn goof. let it sit for a while with the tape on lots of tape. 2 tapping screws in each wheel well also.
#422
CL 4 LYFE
Join Date: Apr 2003
Location: Honolulu, Hawaii
Age: 38
Posts: 4,768
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by ShavedH22CL
I have found a way. it is on damn good. I went on a cruise yesterday and went up to 100mph. its solid now. im just saying when u get this mount it damn goof. let it sit for a while with the tape on lots of tape. 2 tapping screws in each wheel well also.
1. Wash the bottom of your bumper. (only need to know that if ur a noob)
2. Apply one layer of tape across the whole inner part of lip.
3. apply 1 more layer.
A. Drill 2 holes in each wheel well throut where the lip goes through the bumper. then screw 2 tapping screws in each side.
4. make sure the lip fits in the grove between your stock lip thing and bumper.
5. Let it sit for a while and get a good stick.
With this method i ahve tested up to 100MPH and help perfect.
1. Wash the bottom of your bumper. (only need to know that if ur a noob)
2. Apply one layer of tape across the whole inner part of lip.
3. apply 1 more layer.
A. Drill 2 holes in each wheel well throut where the lip goes through the bumper. then screw 2 tapping screws in each side.
4. make sure the lip fits in the grove between your stock lip thing and bumper.
5. Let it sit for a while and get a good stick.
With this method i ahve tested up to 100MPH and help perfect.
glad to hear you got a better fittment
#424
contrarian in fashion
i really want that lip... gotta raise my car up a slight to do that tho... car is slammmmmed to the ground.
anyone know of a good camber kit fr my front at least???
anyone know of a good camber kit fr my front at least???
#425
Senior Moderator
Join Date: Jul 2002
Location: Bay Area, CA
Age: 39
Posts: 12,005
Likes: 0
Received 9 Likes
on
8 Posts
Originally Posted by PimpCL23
i really want that lip... gotta raise my car up a slight to do that tho... car is slammmmmed to the ground.
anyone know of a good camber kit fr my front at least???
anyone know of a good camber kit fr my front at least???
#427
CL 4 LYFE
Join Date: Apr 2003
Location: Honolulu, Hawaii
Age: 38
Posts: 4,768
Likes: 0
Received 1 Like
on
1 Post
The lip looks good. The way you can pull it off depends on what your car looks like on the outside.
The only reason why I believe that it looks good is because I know I can pull of that certain look.
If people are concerned about how much the lip lacks in flow, they're better off with the WW lip.
The only reason why I believe that it looks good is because I know I can pull of that certain look.
If people are concerned about how much the lip lacks in flow, they're better off with the WW lip.
#428
how handsome I am
Originally Posted by lnsyone
The lip looks good. The way you can pull it off depends on what your car looks like on the outside.
The only reason why I believe that it looks good is because I know I can pull of that certain look.
If people are concerned about how much the lip lacks in flow, they're better off with the WW lip.
The only reason why I believe that it looks good is because I know I can pull of that certain look.
If people are concerned about how much the lip lacks in flow, they're better off with the WW lip.
#431
how handsome I am
Originally Posted by ib_jimmy
i'm gonna go look at this GS300 tonight, if i like it...imma pick it up tomorrow. then everything in my car must go. WW lip too.
#438
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by agranado
I guess I'll keep my ww lip then
#439
Suzuka Master
Originally Posted by roddymerritt
Jimmy don't forget about me I want your hood just need to know a status
#440
Suzuka Master
Originally Posted by starboy2nv
hey hey i got first dibs on the lip...
K, i will try to pull it off tonight and clean it up. i'll keep you posted.