ok, its been broken for a while now, but im getting really tired of the key! what origionally happened was one night, the light started to flicker on the clicker... so i thought the battery was goin dead... and it wouldnt unlock and lock... so i go get a new battery the next day and it works fine for about half the day..... then i go to unlock the doors and it wouldnt work... and i noticed the light just stayed on... any ideas? has this happened to any of you? what would you suggest?!

 

reprogram it

 

what do you mean?

and how do i do that? how would that help?

 

mine will work some times but not work other times.. and i have to hold the trunk and the lock buttons at the same time to make it chirp cuz it resets itself also.. the battery is new... i just dont get it

 

thats what mine does too...you have to reprogram the remote

 

search ownz
Try reprograming the remote here are the instructions

1. Turn the ignition switch on (II on the ignition)<BR>
2. W/in 1-4sec, push the transmitter lock or unlock button with the transmitter aimed at the keyless receiver unit. (Just at the steering wheel is fine)<BR>
3. W/in 1-4sec, turn the ignition switch off<BR>
4. W/in 1-4sec, turn the ignition switch on(II)<BR>
5. W/in 1-4, push the transmitter lock or unlock button w/ the transmitter aimed at the receiver again.<BR>
6. W/in 1-4sec, turn the ign. switch off<BR>
7. W/in 4sec, turn the ignition switch On(II)<BR>
8. w/in 1-4sec, push the transmitter lock or unlock again.<BR>
9. w/in 4 sec, turn the ign off<BR>
10. w/in 4 sec, turn the ign ON<BR>
11. W/in 1-4, push the transmitter again<BR>
12. Confirm you can hear the sound of the door actuators. W/in 1-4sec, push the trans lock or unlock button again.<BR>
13. W/in 10sec, aim the transmitters (up to three) whose codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored.<BR>
14. Turn the ignition switch off, and pull out the key.<BR>
15. Confirm proper operation with the new codes<BR>

 

ok, how about his one!?


im looking at new keyless clickers on ebay... can i buy a clicker for the new cl's and program it to my entry system... or does it NEED to be a clicker for my year cl?! i know some people in the past bought the clicker for the new cl and cut out their old clicker shit and fit it to the new ones.... but can i just bu a new one and program it to my old system?

 

as long as the FCC number is the same

 

I had this happen, when the light stays on, you can't fix it. You have to buy a new one.

 

Sounds like there's a short inside it. Try popping it open and wiping down with a q-tip dipped in rubbing alcohol.

 

the fcc number is on the back?! so if that numbers the same then itll work... i jus gotta program it based on the directions you posted before?!

 

hey thanks for posting those directions.. im going to go try it now.. if it doesnt work.. im going to come back inside and write a bad review.. haha

 

EXACT same thing happened to me. Get a new one on eBay.

 

Just get a better alarm, with all that a/v equipment you have, I'm suprised that you don't have a better alarm.

 

ya mine broke ... just search on ebay for em and match up the fcc number then reprogram to ur car ... werks like a charm

 

where do you find the fcc number? is that the serial number on the back of the clicker?


and baka-
re: the better alrm, i guess i've just been lucky... never put my car in a situation where it can get broken into... i know the stock alarm isnt much, but people round here dont know its stock when they hear the beep....

 

yeah.. it sounds like it has a decent alarm ... works great again.. chirp chirp thanks wakeboard

 

Where Can I Find My Fcc Number Guys!????

 

i saw one on ebay for 97-99 CL. i think it wuz 25$ buy it now + shipping.

 

The FCC # is on the back of your remote, it's on a sticker. I would help you but I don't have my keys on me right now. I think you can also call the dealership and them too.

 

the only thing on the back of my remote is the serial number.... is that my "FCC"?

 

how bout this.... is anyone else's fcc number w680038.... thats not all of my number, but is anyone elses resemble mine? all of em on ebay right now are a kubalt8..... something or other... am i reading the right thing here?! this is the only number on the back of my remote

 

hmm i think mine actually said fcc my keys are at the shop so i cant help ya kid sorry

 

Thanks Wake!
I've needed one that I could print. The only one I had was a scan that I couldn't print and read at all!
Thanks again!!!!

 

Yep, that would be me your talking about. The 01+ Key FOB owns. Looks MUCH nicer than the shitty ones that come with our car. PLUS, civilians think that you have a newer/nicer car when they see your keys.
If anyone is intersted in swapping remote casings, PM me, i can do the work.