boarder445

ok guys, im really dumb, i dont have an owners manual and the aem directions arent that great... first of all...... how do i get my jack out!!!! it wont come out. thanks

boarder445

ok im really dumb, i figured it out

Atl-CL

duhhhhhhhhhhhhhh!!!!!!!! j/k Glad you were able to figure that one out. Next question, where do I put this key thingy? Oh the ignition. hahahahah:P

VXCL

yo rip out all the stock crap. that means
1. the intake tube
2. the big resonator box in the bumper
3. the air box
4. the little shit thing connected under the stock intake tube
5. all parts that hooked up to that thing. a bunch of hoses and one electrical connector. that sytem is the A.I.R sytem and u dont need it. ull see that all those little hoses trun into one that goes up to the firewall.rip that hose off and cap that one line.
6. install aem intake
7. hook up hose from valve cover to aem intake
8. put air filter on intake and close up the wheel well
9. resest ur ecu. pull the fues in the box on the passenger side of car in engine bay or just discconnect battery. let it sit for awhile.
10. hook up battery or put fuse in
11. start car and let it warm up dotn give it any gas
12. u r done enjoy
if u need more help call me. # is on my site. aslo make sure u are outside with ur car when u call and ill tell u what u need to know if u get stuck
later

Eqlize

Do these instructions apply to the 3.0 also?

-EQ

niedejb

Nope. You'll have to go out and get a 2.2. Sorry.

Quite a bit different from what I've seen but cant help you with the details.

VXCL

for the most part . they are both the saem idea. but i think u get ur cai from a 98+ v6 cord. not 94-97 accord. ull have to check on that