Finished My Swap!!!!
#1
Always drivin 100+
Thread Starter
Join Date: Mar 2002
Location: Upper Marlboro, Maryland
Age: 45
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
Finished My Swap!!!!
What's up everybody, thanks again for those of you who answered many of my annoying questions, but I couldn't be without my car too long. As you can see I have finally finished the swap and the car runs strong as hell!!!! I love it expect for the JDM Fuel cut off at 120mph, I will have to get my p13 chipped with hondata or skunk2 because that ish.. is annoying. Now the entire front of my car is pretty much all prelude hahahha man 4 years ago I would of never thought this, but i must say being able to hear and slightly feel Vtec kick in at 5200 is tight. Well, thanks again everyone and good luck to those of you who are in the middle of this swap or are thinking about it. If you have any questions hit me up.
Finsihed my swap
Finsihed my swap
#6
Always drivin 100+
Thread Starter
Join Date: Mar 2002
Location: Upper Marlboro, Maryland
Age: 45
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
lolol hahaha lysone far from ahha good one though, been working at it for almost 1 month now. It's all good though. I converted to manual from an auto though.
Trending Topics
#8
Always drivin 100+
Thread Starter
Join Date: Mar 2002
Location: Upper Marlboro, Maryland
Age: 45
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
97CL22 it looks to me like you haten already. The post was for the swap, not your opionion on the little shit because I don't recall anyone asking you. First off the club is because I didn't hook back up the alarm yet, see I am near the city, not some country town where you can leave your door unlocked and your car is still there when you get back, and number two the Acura on the woodgrain, that's cool if you don't like it, but who gives a fuck hahahahah Everyone else has seemed to think it looked cool but honestly, the car is a lot more fun to drive now, so I really ain't worried about haters like yourself!!!
#9
Always drivin 100+
Thread Starter
Join Date: Mar 2002
Location: Upper Marlboro, Maryland
Age: 45
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
Thanks 98CLturbo, oh and you know I was admiring all the work you have done to your car. You gotta let me know how that new turbo works out for you. Sweet setup man!!!
#10
Old Timer
Join Date: Jan 2002
Location: tampa florida/ grand cayman
Posts: 927
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 97CLgenius
First off the club is because I didn't hook back up the alarm yet, see I am near the city, not some country town where you can leave your door unlocked and your car is still there when you get back, so I really ain't worried about haters like yourself!!!
First off the club is because I didn't hook back up the alarm yet, see I am near the city, not some country town where you can leave your door unlocked and your car is still there when you get back, so I really ain't worried about haters like yourself!!!
#13
Old Timer
Join Date: Jan 2002
Location: tampa florida/ grand cayman
Posts: 927
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by d98clturbo
are you talking to me cuz i said welcome to the CLUB.....if you are i am not trying to HATE as you put it...i was just saying welcome to the club (H22 cl club)
are you talking to me cuz i said welcome to the CLUB.....if you are i am not trying to HATE as you put it...i was just saying welcome to the club (H22 cl club)
#14
Old Timer
Join Date: Jan 2002
Location: tampa florida/ grand cayman
Posts: 927
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 97CLgenius
Thanks 98CLturbo, oh and you know I was admiring all the work you have done to your car. You gotta let me know how that new turbo works out for you. Sweet setup man!!!
Thanks 98CLturbo, oh and you know I was admiring all the work you have done to your car. You gotta let me know how that new turbo works out for you. Sweet setup man!!!
#17
Always drivin 100+
Thread Starter
Join Date: Mar 2002
Location: Upper Marlboro, Maryland
Age: 45
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
oh word Insyone, hahahah tight, let me know what you think, The car is a lot fun to drive now, I can't believe how much I missed manual, and the high rev h22a is a champ. Let me know if you have a govner of 120mph. Thanks 98turbo and mark, appreciate that props, Jamolie, I got the front Clip from a place in VA called Noyan USA for 2500. Since I was converting from a auto to a manual I wanted everything so I didn't have to piece stuff together. For all the parts needed I would say it ran me about 5 grand all together, labor didn't cost me much because I performed half the install my self so all and all I would say like 3400 for everything including the install. Jamolie if you want to see what the swap is comprised of goto www.wam.umd.edu/~pbrown and click on engine swap.
#20
Always drivin 100+
Thread Starter
Join Date: Mar 2002
Location: Upper Marlboro, Maryland
Age: 45
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
I bet you do, for right now I'll be running a 75 shot to it right when Vtec kicks in, I hope that will give me the pull I am looking for, then come next year I am gonna go turbo.
#24
Originally posted by 97CLgenius
Well why I have you guys here, what's the starting point of the redline on the h22s?
Well why I have you guys here, what's the starting point of the redline on the h22s?
#26
LA`s Top CL
Join Date: Nov 2002
Location: Los Angeles
Age: 40
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
hondata or skunk damyamn u seem like your going all out all you need is a new ecu or just chip it with jun mugen dadadadada hondata and all the fuel management stuff is good with many many mods
#28
LA`s Top CL
Join Date: Nov 2002
Location: Los Angeles
Age: 40
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
hmmm damn i would rather have a p30 Jun chip but o wels hey if u can find me a good price for that let me know scott or trade for a p28 Jun chip mayb cash iono we`ll seee
#30
Originally posted by Duece
hmmm damn i would rather have a p30 Jun chip but o wels hey if u can find me a good price for that let me know scott or trade for a p28 Jun chip mayb cash iono we`ll seee
hmmm damn i would rather have a p30 Jun chip but o wels hey if u can find me a good price for that let me know scott or trade for a p28 Jun chip mayb cash iono we`ll seee
#32
Old Timer
Join Date: Jan 2002
Location: tampa florida/ grand cayman
Posts: 927
Likes: 0
Received 0 Likes
on
0 Posts
be carefull with those ecu's....if you are gonna have forced induction (nos or turbo) you DO NOT want to havean ecu with advanced timing which those (jun, skunk, mugen ecu's are)
make sure you know what you are getting yourself into before you purchase something like that
make sure you know what you are getting yourself into before you purchase something like that
#37
Originally posted by ayougo
i have a stock cl 2.2 *think* will that chip work on mine ?
i have a stock cl 2.2 *think* will that chip work on mine ?
Thread
Thread Starter
Forum
Replies
Last Post
xsilverhawkx
2G TL Problems & Fixes
5
09-28-2015 06:51 PM