Finally pics up
#41
Originally Posted by honda3x23
mines a fwe hundred off although its dead on acurate ^^^^
OK when i did all this it was 4 years ago. So I had to do what I had to do. i took alot of work buT I have stage 4 p and p I also have all FERRA titanimun valves, springs, and ret, With a lude 62mm throttel body with AEM 3" intake. I took my stock cam and shipped it out to my buddy about 3 times to get what I wanted. I got the swpecs somewhere. But i have a modded cam and h22 rods with earlie h22 pistons. Compe is 12.5:1. Never ran in 1/4 mile. its kinds pointless cause its a tank. I have a stage 3 clutchmasters clutch. And what the hell is a g23. I have my ecu chipped, and the tach isn't working right now because my MSD box is fucked so I 'm waiting on them to see what they are doing about it.
el oh el ^^
OK when i did all this it was 4 years ago. So I had to do what I had to do. i took alot of work buT I have stage 4 p and p I also have all FERRA titanimun valves, springs, and ret, With a lude 62mm throttel body with AEM 3" intake. I took my stock cam and shipped it out to my buddy about 3 times to get what I wanted. I got the swpecs somewhere. But i have a modded cam and h22 rods with earlie h22 pistons. Compe is 12.5:1. Never ran in 1/4 mile. its kinds pointless cause its a tank. I have a stage 3 clutchmasters clutch. And what the hell is a g23. I have my ecu chipped, and the tach isn't working right now because my MSD box is fucked so I 'm waiting on them to see what they are doing about it.
el oh el ^^
yeah, 11 grand........i dont think so. According to the reciepts upon my purchase, the motor build in the car i bought totaled no more than 2434.84 cents. Also, Ferra doesnt make ti valves,springs and retainers for our cars...not all three. And....given your piston and rod combo, 12.5.1 isnt even possible.
#42
NAWWWWSSSSSS
Join Date: Aug 2003
Location: st. paul minnesota
Age: 38
Posts: 6,661
Likes: 0
Received 1 Like
on
1 Post
good work but you forgot a few things....... he doesnt know what a g23 is yet in his sig it says he has a fully built h22 head ![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
you cant chip our ecu
msd boxes dont affect shit, your distributer tells your computer what rate your motor is spinning
![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
you cant chip our ecu
msd boxes dont affect shit, your distributer tells your computer what rate your motor is spinning
#44
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by 97Acura3.0CL
anyone else thinks it reminds them of Katana's ride
looks the same color and all
looks the same color and all
![Werd](https://acurazine.com/forums/images/smilies/werd.gif)
![Yum](https://acurazine.com/forums/images/smilies/yum.gif)
#46
Originally Posted by honda3x23
good work but you forgot a few things....... he doesnt know what a g23 is yet in his sig it says he has a fully built h22 head ![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
you cant chip our ecu
msd boxes dont affect shit, your distributer tells your computer what rate your motor is spinning
![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
you cant chip our ecu
msd boxes dont affect shit, your distributer tells your computer what rate your motor is spinning
haha, yeah i was about to mention that, but i figured he was just messin about the build part. From what i see, that is a Sohc Vtac motor. Although many belive our ecu's cannot be chipped, they can be reprogammed by jet. If your build like this misters car though......just a chip or jet flash wont do anything, you'd need to get a standalone or piggyback and some dyno time. Also, whats the point of having the "pretend" compression of 12.x.x if you cant go past 6500 ? Tq is out of the question realy and F blocks do NOT have oil squirters so he'd be rockin a buster motor if he dared to rev like a B series. take a look at pirate on HT, It took alot to get him the compression ratio he's at and all this members mods simply are impossible ..........especialy 4 years ago when Ferra didnt even carry these parts.
#47
one more thing. With that cp ratio and mod list........theres alot more heat...ALOT more. Im not seeing the Aftermarket Rad. Even were im at, i could benifit from better cooling, and thats at 9:5:1
![ugh](https://acurazine.com/forums/images/smilies/ugh.gif)
#49
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by FULLRACE
haha, yeah i was about to mention that, but i figured he was just messin about the build part. From what i see, that is a Sohc Vtac motor. Although many belive our ecu's cannot be chipped, they can be reprogammed by jet. If your build like this misters car though......just a chip or jet flash wont do anything, you'd need to get a standalone or piggyback and some dyno time. Also, whats the point of having the "pretend" compression of 12.x.x if you cant go past 6500 ? Tq is out of the question realy and F blocks do NOT have oil squirters so he'd be rockin a buster motor if he dared to rev like a B series. take a look at pirate on HT, It took alot to get him the compression ratio he's at and all this members mods simply are impossible ..........especialy 4 years ago when Ferra didnt even carry these parts.
#50
Bagel Bomber
holy crap, my rice detector was going off as i clicked on this thread. The external isn't bad, but the inside?!?! Its just my opinion, but it looks cheap - way to take the class out of your CL. Goodluck selling it thought!
I was working at BWI all last year - never saw you around the hood they call GB
I was working at BWI all last year - never saw you around the hood they call GB
#52
Originally Posted by Mach30SiR
I was working at BWI all last year - never saw you around the hood they call GB
we call it Glen Dirty
![Snicker](https://acurazine.com/forums/images/smilies/emot-laugh.gif)
Swain, where'd you get the paint and body work done? and how much did the shaved moldings and handles run you?
#54
Advanced
Thread Starter
Join Date: Aug 2003
Location: glen burnie md
Age: 41
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FULLRACE
yeah, 11 grand........i dont think so. According to the reciepts upon my purchase, the motor build in the car i bought totaled no more than 2434.84 cents. Also, Ferra doesnt make ti valves,springs and retainers for our cars...not all three. And....given your piston and rod combo, 12.5.1 isnt even possible.
Yeah i know this. That's why their lude h22 parts just modded. All you gotta do is a lil bit of research.
#56
Advanced
Thread Starter
Join Date: Aug 2003
Location: glen burnie md
Age: 41
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by honda3x23
good work but you forgot a few things....... he doesnt know what a g23 is yet in his sig it says he has a fully built h22 head ![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
you cant chip our ecu
msd boxes dont affect shit, your distributer tells your computer what rate your motor is spinning
![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
you cant chip our ecu
msd boxes dont affect shit, your distributer tells your computer what rate your motor is spinning
#57
Advanced
Thread Starter
Join Date: Aug 2003
Location: glen burnie md
Age: 41
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FULLRACE
haha, yeah i was about to mention that, but i figured he was just messin about the build part. From what i see, that is a Sohc Vtac motor. Although many belive our ecu's cannot be chipped, they can be reprogammed by jet. If your build like this misters car though......just a chip or jet flash wont do anything, you'd need to get a standalone or piggyback and some dyno time. Also, whats the point of having the "pretend" compression of 12.x.x if you cant go past 6500 ? Tq is out of the question realy and F blocks do NOT have oil squirters so he'd be rockin a buster motor if he dared to rev like a B series. take a look at pirate on HT, It took alot to get him the compression ratio he's at and all this members mods simply are impossible ..........especialy 4 years ago when Ferra didnt even carry these parts.
infact how the fuck do you think they got the fucking specs. You all are fucking kidding me. I know what i got you can come check it out. Fuck this page. you all can eat shit
#59
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by swain's cl
damn you all are fucking tough. Well when you have the box on my tach it says go to the box. Cut the shit. And you can chip our shit cause i got that damn thing chipped. you just need to know people.
![Werd](https://acurazine.com/forums/images/smilies/werd.gif)
#62
Originally Posted by 97BlackAckCL
![Werd](https://acurazine.com/forums/images/smilies/werd.gif)
Also, dont tell me they got the specs from your build.........people were callin in for aftermarket support in 99 for accords.
You dont have a h22 head
Your car is slow...........paints nice though.
![Yum](https://acurazine.com/forums/images/smilies/yum.gif)
#65
Originally Posted by honda3x23
mad respect for you dude.. you gotta lie to get it........ so worht it, not
Fool me once...................shame on....................shame on you. Fool me — you can't get fooled again
#67
Advanced
Thread Starter
Join Date: Aug 2003
Location: glen burnie md
Age: 41
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FULLRACE
No..........no you cant. Jet is able to reprogram the unit but for his "mods" its worthless.
Also, dont tell me they got the specs from your build.........people were callin in for aftermarket support in 99 for accords.
You dont have a h22 head
Your car is slow...........paints nice though.![Yum](https://acurazine.com/forums/images/smilies/yum.gif)
Also, dont tell me they got the specs from your build.........people were callin in for aftermarket support in 99 for accords.
You dont have a h22 head
Your car is slow...........paints nice though.
![Yum](https://acurazine.com/forums/images/smilies/yum.gif)
car is slow. but you can just wait until the h is in then you can run your mouth
#68
Advanced
Thread Starter
Join Date: Aug 2003
Location: glen burnie md
Age: 41
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by starboy2nv
LOL... damn i would have charged you 3500 for paint and made your hood line up correctly with the bumper... ![Fluffy](https://acurazine.com/forums/images/smilies/fluffy.gif)
![Fluffy](https://acurazine.com/forums/images/smilies/fluffy.gif)
yeah you right on that that was when some jack ass desided to make oh a left hand turn from 3 lanes away. I'm gettign it fixed though
#69
how handsome I am
Originally Posted by swain's cl
yeah you right on that that was when some jack ass desided to make oh a left hand turn from 3 lanes away. I'm gettign it fixed though
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
#71
CL 4 LYFE
Join Date: Apr 2003
Location: Honolulu, Hawaii
Age: 38
Posts: 4,768
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by FULLRACE
Your car is slow...........
http://video.google.com/videoplay?do...04625866125198
#74
4x4- fat chicks cant jump
Join Date: Mar 2006
Location: NC
Age: 35
Posts: 1,192
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FULLRACE
Fool me once...................shame on....................shame on you. Fool me — you can't get fooled again
#75
I SMELL NAWZ
Join Date: Oct 2004
Location: East Side San Jose, CA
Age: 38
Posts: 1,546
Likes: 0
Received 1 Like
on
1 Post
lots of how to make 16 second cars 15 second cars information in this thread
if you really spent 11g's on that motor... your a fool, and you got ripped REAL bad
11g's for a "H22 modified internal pieces and custom what nots"
if i was willing to spend 11g's on a 2.x i sure as fuck would NOT be workin with no F series
but like everyone else has said
the car looks clean and i think if your gonna do any colorful interior stuff you might as well go big or go home would look kinda funny with only some parts blue and not alot
![what](https://acurazine.com/forums/images/smilies/what.gif)
if you really spent 11g's on that motor... your a fool, and you got ripped REAL bad
11g's for a "H22 modified internal pieces and custom what nots"
![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
if i was willing to spend 11g's on a 2.x i sure as fuck would NOT be workin with no F series
![what](https://acurazine.com/forums/images/smilies/what.gif)
but like everyone else has said
the car looks clean and i think if your gonna do any colorful interior stuff you might as well go big or go home would look kinda funny with only some parts blue and not alot
#78
...nO phOtOshOp...
Join Date: Jun 2005
Location: AnnApOlIs, mD
Age: 38
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FULLRACE
i dont care if you get an H in there it still cannot beat me.
Oh and swain's cl sold his car, cause i tty him yesterday... i guess he got tired of every1 givin him shit... 2 words gaudy & over-exagerated... now he has a 92 shIt-vic hatch
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
![Too Cool](https://acurazine.com/forums/images/smilies/toocool.gif)