97Acura3.0CL

For all those that are looking to do the Carbon Fiber look for your dash, I have the solution for you. It is my 8 Page, yes 8 pages of step by step instruction on how to remove the interior piece, door trim, main trim and customize it yourself. this is how mine turned out.
Directions for this Install with pictures is located at the bottom of my post




and after a longs couple of days and fixing this POS main trim that i broke :angry:



i finally got to relax and enjoy what i did


but anyways i have detailed instruction on how to do this step by step with illuustrations, pics, and location of all the clips on the main piece that no one will tell you where they are at. so i hope you guys enjoy this and appreaciate it, it took me almost 2 days to fully write and organize this material for the website. so here ya go. please only 3 users on at a time so be patient if you can't login or download it.

thanks
To download this file you must right click on it and "Save Target As" and save it to your system
Direction for Removal Of the First Gen Wood Gain Trim

creationCL

lookin good, great instructions!

you should do your center console too

cor

looks good-- nice job

r3mix3r

thankz appreciate it... Very good pics... im thinkin of doing it myself does it come right off also? I didnt know they made CL's with CLOTH!! I'd actually rather have cloth in florida black leather is hot as ballz!

klepto

lookin good man

ge1stn

NICE !!!!!

ACsocr9

How do you take off the door panel? I am really confused with this part!

97Acura3.0CL

read my instructions they walk you through it if you need more help pm me or im me on aol @jgiguere17

ACsocr9

I'm on im at ChikosA9

RippinRide

Nice job man! Thanks for taking the time out to contribute something like this to the fellow members.

VXCL

FYI- the first cl i test drove was a 97 3.0 w/ BLUE!!! cloth interior!!!

moforose3.0

Good deal man thanks, looks really good.

97Acura3.0CL

just to let anyone know if you want the instructions now you have to pm or im me on aol @ jgiguere17 i have turned off my server and if you want them i will need to turn it back on, so check with me to make sure its on or i will turn it on for ya

im glad everyone is liking my interior i took a lot of time doing this project and making up the direction too, so i hope you all appreaciate it i know you all do

enjoy and let me know if anyone needs any help

ACsocr9: hey man hope everything is going well, let me know when you got those pics of yours and those pics of the interior of the door. good luck and keep me posted, and remember you can pm me if you have anymore question

CLpower

looks good



it's scary, you kind of look like me!

stretchjob

yeah I almost bought one. silver with gray cloth int.

97Acura3.0CL

wow revive from the dead

there is a post a couple of post down and DanMan posts about a link to the page he hosted for me

acura4ever

97Acura3.0CL : send me your link and files my ftp is always up

pm me for more info

acinteg10

I bet the curves were a BIATCH right ????

97Acura3.0CL

no the most hardest part was taking off the center piece, most break it if you dont know where all the location of the clips and screws and i broke mine just to make these instructions cause i did not know all of them were at and i show you how not to do it and if you do break it i show you how to fix the piece

but the curves are tight, and hard, if you pull too hard the CF will look out of place and wrong, but all i did was do it normally and then allow the flaps and then slice them and fold of the extra piece

it looks clean, ask klepto, he's seen it in person, im redoing it soon in real .03mm CF from Hayame from Japan so hopefully that will make a better show presentation

acinteg10

OHHH OK Cuz I wanted to do that put I'm going to pay someone to do just incase that same thing happened to u about breaking the center.

97Acura3.0CL

dont pay someone, just tkae your time and be patient

it will work, my instructions show you EXACTLY where everything is so you cant mess up like i did, mostly a lot of the peps that did theres painted used my instructions or read them in some way to help them out

its not that hard, on a 1-10 rating i give it about a 6/7


projector conversions are another story

Chiny-J

i can't download your file?

DanMan1464

http://home.comcast.net/~9delipy/wood.doc

i've hosted for months...very long time

its in a few other threads...mighta s well add it here

Chiny-J

sweeeeet. thanks man

97Acura3.0CL

DanMan comes to the rescue

so what do you think?

an 8mb file too me about 2 weeks to make or so to match up correctly with pics

h2o-pr00f

dude thats good stuff joe i saved it.. thanks for taking the time to show everybody your mistakes too.. thats very important now a 8mb .doc on black headlight housings..

wakeboardfusion

thanks thats rad

97Acura3.0CL

you know it

and black housing are coming next with the dual projector setup and angel eyes i just got

h2o-pr00f

ya man i was just gonna ask hows that goin for ya