how hard would it be?? has any one done this to a first gen cl yet??

 

ive heard of people with the 94-97 accords using the odessey hubs and brakes.

 

all i know is that you better have some $$$ laying around..

 

Do it... Post it, and they will read it.

 

http://cgi.ebay.com/ebaymotors/5x114...spagenameZWDVW

not too bad, its just my brother has an 03 accord, we would be able to switch out rims...... alot of rims i like with 5x114.3 also......

 

i know you want to do it for the rims the come in 5 lug... but other than that whats the point. its just gonna waist a lot of money and time if you ask me

 

i do agree there's a lot better rims that comes 5 lugged -_-'' jealous but oh well

 

im doing an 8 lug conversion this winter.

 

JEE WILLIKERS BATMAN. thats a lot of lugs

 

i dont know if any of you know his, but s13's are the same lug pattern as us, so you can find plenty of sick rims for our cars.....you just gotta know where to look.

 

yep 4x114.3

you guys dont know how many blingin rims there are for our cars. you guys are just looking in the wrong places.

 

those are rear wheel drive.. the wheels will rub.

 

he's saying that s13's have the same lug pattern as the cl and there are quite of a selection of wheels with a 4x114.3 lug pattern.

 

a extra 200 bucks to change it out to a 5 lug hummmm not too bad IMO i can get some great deals on 5 lug rims in town i would save money, installation shouldnt be that hard, i have switched out rotors,lug nut pins, control arms ect. just not sure if i have the time....

 

my 5 lug conversion project totalled out to 4grand. my car isnt worthy of that yet, nor do i have the money for it.

 

i dont think it would be 4 grand!!! what would all be needed to be done?

 

my project does.

dss stage 5 axles - 1000
large rotors - 500-700
top secret calipers - 1200 a pair

 

No wonder its 4K with top of the line stuff..diablo

 

damn, your gonna have STOPPING power after its all said and done with

 

the off set for rear wheel drive cars are totally different than ours.. im sure it will fit but as soon as you hit a bump or turn it will rub. especially in the back due to that upper control arm being that it is only 1/4" away from the rear tire with my 18's on.

 

he was speaking in generallity.

but i understand what you mean.

 

that rear control arm freaks me out how close it sits to the tire. It is odd how the 1st gen 3.0 have 4 bolt lug pattern but the same year Accord EX v6 has a 5 bolt lug. Then on the 2nd gens, they went to five for 3.0 and 3.2. hmmmmmm

 

i hate how they engineered the cls with 4 lugs.

 

I have a 4x114.3" to 5x114.3" conversion. I use these





I have better pics, but they're at home

 

how much they run you and how much did it change your offset.