2009 MDX Driver Door Harness
#1
2009 MDX Driver Door Harness
I've discovered several broken wires in the driver side door harness (part 32757-STX-A00) on my wife's 2009 MDX. This part is on backorder EVERYWHERE - for several months. Problem is, I now have non functioning windows with one stuck a bit down in very cold weather! I'm on a wait list to receive the part whenever it gets unloaded from whatever dock it is stuck on, but right now all estimates are for end of March...or later.
In the mean time, I think I could repair this by popping out the pins and resoldering them to the wires - BUT - I have no idea where each of the 3 wires should be connected. I guess I could use "trial and error" - with 3 wires there are only 6 combinations (ABC, ACB, BAC, BCA, CAB, CBA) but I'd prefer to do this the smart way and find a wiring diagram. Is there a way to look up the diagram for a specific connector on the car?
Thanks!
In the mean time, I think I could repair this by popping out the pins and resoldering them to the wires - BUT - I have no idea where each of the 3 wires should be connected. I guess I could use "trial and error" - with 3 wires there are only 6 combinations (ABC, ACB, BAC, BCA, CAB, CBA) but I'd prefer to do this the smart way and find a wiring diagram. Is there a way to look up the diagram for a specific connector on the car?
Thanks!
#2
I've discovered several broken wires in the driver side door harness (part 32757-STX-A00) on my wife's 2009 MDX. This part is on backorder EVERYWHERE - for several months. Problem is, I now have non functioning windows with one stuck a bit down in very cold weather! I'm on a wait list to receive the part whenever it gets unloaded from whatever dock it is stuck on, but right now all estimates are for end of March...or later.
In the mean time, I think I could repair this by popping out the pins and resoldering them to the wires - BUT - I have no idea where each of the 3 wires should be connected. I guess I could use "trial and error" - with 3 wires there are only 6 combinations (ABC, ACB, BAC, BCA, CAB, CBA) but I'd prefer to do this the smart way and find a wiring diagram. Is there a way to look up the diagram for a specific connector on the car?
Thanks!
In the mean time, I think I could repair this by popping out the pins and resoldering them to the wires - BUT - I have no idea where each of the 3 wires should be connected. I guess I could use "trial and error" - with 3 wires there are only 6 combinations (ABC, ACB, BAC, BCA, CAB, CBA) but I'd prefer to do this the smart way and find a wiring diagram. Is there a way to look up the diagram for a specific connector on the car?
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
Nate Johnson
Audio, Video, Electronics & Navigation
0
01-26-2020 09:19 PM