Cel p1710
#2
Senior Moderator
I dont see a 1710 in the manual but any thing 1700+ is trans related. DO you still fall under the trans warranty?
#6
Senior Moderator
Being a 2003 your probably not in the covered vin range, and with the miles your out side it. Odds are you have a trans failure coming up. Do you notice any harshness going into gear or any minute slippage between shifts (most noticeably the 2 to 3 shift)
#7
Instructor
Thread Starter
Join Date: Mar 2005
Age: 44
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
no harshnass or slipage.Everything feels smooth right now but I will pay close attention to 2 and 3 shift. I still have to find out the exact problem for code p1710 so I can fix this before any trans failure.
Trending Topics
#10
here are the instructions to properly diagnose the code.
http://uploading.com/files/85SD40HY/1710.pdf.html
I hope that helps. How come we cant upload files to acurazine?
http://uploading.com/files/85SD40HY/1710.pdf.html
I hope that helps. How come we cant upload files to acurazine?
#12
I just looked over the pdf again and part of step 6 got left out. Here is the rest of it.
YES - Repair open in the wire between PCM connector terminal E14 and the 1st-hold switch.
NO - Go to step 7.
YES - Repair open in the wire between PCM connector terminal E14 and the 1st-hold switch.
NO - Go to step 7.
Thread
Thread Starter
Forum
Replies
Last Post