NBP cl + Menzerna = wet PICS PICS PICS
#1
NBP cl + Menzerna = wet PICS PICS PICS
My process was rinse wash pre soak with pb's super slick n suds, polish using pc and pb's ssr 2.5 then menzerna po106ff, and wax with pinnacle souveran. The paint wasn't this good when i bought the car. It took a whole weekend but here are some pics.
#2
Nice! Excellent choice of products, I might add. One question, isn't PO106FF for ceramic clearcoat? I believe it was designed for the harder European clearcoat instead of the softer Japenese clearcoat, I think. Just curious to find out if you had any problems or issues while using it. I think I read it somewhere on one of the detailing forums.
#3
That is very true and they warn you about it on the bottle, there is even a disclaimer. It has seven percent of those dominishing micro abrasives which is high for a finishing polish, menzerna fpII only has three percent. The only problem i ran into was on my newly molded body kit, it did a pretty good job but there was super minor marring that only i could see, you know how it is for detailers, they never think anything looks good. I think it was because the clearcoat was so new. That's why i ordered the fpII, it cleared most of it up but there was even less but it was still barely there, not like in the photos with the factory paint. I would recommend discretion when using this product because over use can do damage to conventional clear coats. But when done right the left over finish is simply unbeatable. Thanks for the compliment.
Thread
Thread Starter
Forum
Replies
Last Post
MrHeeltoe
1G TSX Tires, Wheels, & Suspension
20
02-23-2023 01:54 PM
MrHeeltoe
2G TSX Tires, Wheels & Suspension
3
09-29-2015 10:43 PM
MrHeeltoe
3G TL Tires, Wheels & Suspension
0
09-28-2015 05:43 PM