The Official 3G TL Pay-It-Forward "Free-Cycle" Thread
#88
University of Tennessee
Come'on guys. This is not a request thread. I really hate to see a great idea like this go away because people aren't following the rules.
I have a set of base RRP side skirts from an 06. They are in used condition. Haven't looked at them since I took them off.
I have a set of base RRP side skirts from an 06. They are in used condition. Haven't looked at them since I took them off.
The following users liked this post:
Bearcat94 (09-05-2011)
#89
^^^ figured it wouldnt hurt to ask... theres been a few others that have.. they didnt get quoted, they got results. But anyway... I have a set of OEM sidemarkers that Im pretty sure wont sell.. anybody need them PM me
#90
Senior Moderator
iTrader: (1)
The following users liked this post:
Bearcat94 (09-05-2011)
#91
Instructor
iTrader: (2)
Guys,
Just replaced all four of my suspensions with newer ones.
I have 89K on the suspensions that I am giving away. Shipping will be about $100-115.
Local pickup welcomed (Chicagoland).
Good condition - probably good for another 50K w/o too much clunking. No body roll or anything like that and I can still throw it into ramp at 60 w/ no problem. Comes with everything you need.
If you're local, I can help you swap it out as well. Took me about 1.5 hours with air tools.
PM me.
Thanks.
-Eagle
Just replaced all four of my suspensions with newer ones.
I have 89K on the suspensions that I am giving away. Shipping will be about $100-115.
Local pickup welcomed (Chicagoland).
Good condition - probably good for another 50K w/o too much clunking. No body roll or anything like that and I can still throw it into ramp at 60 w/ no problem. Comes with everything you need.
If you're local, I can help you swap it out as well. Took me about 1.5 hours with air tools.
PM me.
Thanks.
-Eagle
#97
Chapter Leader (San Antonio)
iTrader: (3)
45-50k, works, IMO, like the day I got my car. (Like new)
Now I'm going to warn everyone that the shipping will be high. Someone from California asked for a quote before and they said it would cost $170. Now, of course, could've just been his location just wanted everyone aware.
Just want these out of my garage since I got my Koni/Eibachs. Don't mind helping a fellow AZ member out.
Now I'm going to warn everyone that the shipping will be high. Someone from California asked for a quote before and they said it would cost $170. Now, of course, could've just been his location just wanted everyone aware.
Just want these out of my garage since I got my Koni/Eibachs. Don't mind helping a fellow AZ member out.
#105
Early Shifter
iTrader: (2)
I'll participate and help someone out. I have a BNIB Bosch Distance Plus oil filter I got from Advance Auto to qualify for their M1 special. I'm a fan of OEM filters so this is just laying around.
The following users liked this post:
egonz36 (11-06-2011)
#107
06 Anthracite TL
R Vinyl Carbon kit for Acura TL 2004-2008
This is the precut kit with all of the pieces (I did lift up 2 of the pieces -driver's and rear driver's side window switch areas), so new adhesive will be needed on these, but the rest is as new, and the window switch areas can still be used). After I installed the 2 pieces, I wasn't thrilled with the look, so my loss is your gain. New the kit sells for ~$40 as I got the upgraded CF.
Shipping is $10 to PP: erdoc48@comcast.net
Shipping to CONUS addresses only.
PM for dibs before sending payment.
Actually, kit is for the 04-06 cars as the later models aren't included in the listing.
Shipping is $10 to PP: erdoc48@comcast.net
Shipping to CONUS addresses only.
PM for dibs before sending payment.
Actually, kit is for the 04-06 cars as the later models aren't included in the listing.
#109
08 MDX, 04 TL (sold)
iTrader: (1)
I have a pair of front LCAs (with shot bushings). If anyone wants them, let me know. They are very heavy, so shipping will probably suck. Local pickup in Chicago or I can even deliver to pretty much anywhere in Michigan, Illinois, Indiana or Wisconsin. I'll ship to wherever else at your cost.
Photos can be found in this thread: https://acurazine.com/forums/car-parts-sale-361/local-only-il-wi-mi-used-2006-lcas-lower-control-arms-831965/
I also have the body side moldings (door ding bumpers) in Anthracite Metalic: https://acurazine.com/forums/car-parts-sale-361/am-body-side-moldings-door-ding-bumpers-3g-tl-797221/
Photos can be found in this thread: https://acurazine.com/forums/car-parts-sale-361/local-only-il-wi-mi-used-2006-lcas-lower-control-arms-831965/
I also have the body side moldings (door ding bumpers) in Anthracite Metalic: https://acurazine.com/forums/car-parts-sale-361/am-body-side-moldings-door-ding-bumpers-3g-tl-797221/
Last edited by jhumbo; 09-28-2011 at 06:51 PM.
#112
08 MDX, 04 TL (sold)
iTrader: (1)
I have a pair of front LCAs (with shot bushings). If anyone wants them, let me know. They are very heavy, so shipping will probably suck. Local pickup in Chicago or I can even deliver to pretty much anywhere in Michigan, Illinois, Indiana or Wisconsin. I'll ship to wherever else at your cost.
Photos can be found in this thread: https://acurazine.com/forums/showthread.php?t=831965
I also have the body side moldings (door ding bumpers) in Anthracite Metalic: https://acurazine.com/forums/showthread.php?t=797221
Photos can be found in this thread: https://acurazine.com/forums/showthread.php?t=831965
I also have the body side moldings (door ding bumpers) in Anthracite Metalic: https://acurazine.com/forums/showthread.php?t=797221
#117
Rev High; Drive Happy
iTrader: (2)
Join Date: Feb 2008
Location: Scarborough, Ontario
Age: 34
Posts: 4,074
Received 398 Likes
on
332 Posts
2oo4 stock intake-set.
Locals preferred but can ship on your expense.
please PM or email to nguyenxviet@hotmail.com
locals can text/call: 647-961-8414
Locals preferred but can ship on your expense.
please PM or email to nguyenxviet@hotmail.com
locals can text/call: 647-961-8414
#119
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
^^^ if he falls thro, I will take em....