New Philadelphia area TL driver (first car) (plans)
#1
New Philadelphia area TL driver (first car) (plans)
Whats up guys,
Been lurking for a little while, decided recently to start posting here. Im 17 and im driving an 04 ABP TL, 5AT w/ navi.
im a senior in highschool, and i have been given an opportunity to mod my TL for my graduation project!
so far, i have hyper silver xxr 527s 18x8.75 +20 front, and 18x9.75 +20 in the rear.
i am lowered on function and form type 1s(i installed them about a week ago) and im waiting for them to settle in to do final adjustments and an aligment.
also debadged for what its worth lol
plans for near future(on a budget): mid muffler delete & dynomax resonator
considering socal 3" quads to fit my base bumper
tints
type s tails
cleared headlights
Sorry for the long post, but opinions would be appreciated!(pics coming soon)
Been lurking for a little while, decided recently to start posting here. Im 17 and im driving an 04 ABP TL, 5AT w/ navi.
im a senior in highschool, and i have been given an opportunity to mod my TL for my graduation project!
so far, i have hyper silver xxr 527s 18x8.75 +20 front, and 18x9.75 +20 in the rear.
i am lowered on function and form type 1s(i installed them about a week ago) and im waiting for them to settle in to do final adjustments and an aligment.
also debadged for what its worth lol
plans for near future(on a budget): mid muffler delete & dynomax resonator
considering socal 3" quads to fit my base bumper
tints
type s tails
cleared headlights
Sorry for the long post, but opinions would be appreciated!(pics coming soon)
The following users liked this post:
abpmerg (11-05-2013)
#3
Suzuka Master
iTrader: (2)
Stage 3 sounds great IMO. It only sounds like crap when you go Stage 4 or do something silly like remove the rear mufflers altogether.
Welcome OP; those wheel specs are pretty aggressive. Hope you're planning to roll and camber!
Welcome OP; those wheel specs are pretty aggressive. Hope you're planning to roll and camber!
The following users liked this post:
abpmerg (11-05-2013)
The following users liked this post:
abpmerg (11-05-2013)
#5
thanks for the replys
would love to do an aspec kit or atleast a front lip, but not in the budget ATM
was hoping i wouldnt have to roll fenders, but at this point with the height i want to be at it will probably be needed. the springs in the ff type 1s are pretty soft so i dont want to be rubbing everywhere i go
you guys know anyone with the socal 3" quads with a base bumper? only saw one guy in the socal quads feeler thread, and it looked decent.
would love to do an aspec kit or atleast a front lip, but not in the budget ATM
was hoping i wouldnt have to roll fenders, but at this point with the height i want to be at it will probably be needed. the springs in the ff type 1s are pretty soft so i dont want to be rubbing everywhere i go
you guys know anyone with the socal 3" quads with a base bumper? only saw one guy in the socal quads feeler thread, and it looked decent.
#7
BANNED
iTrader: (33)
man...high school sure has changed since i was there.
my graduation project was taking care of an egg for a week and making sure it didn't crack.
my graduation project was taking care of an egg for a week and making sure it didn't crack.
The following 2 users liked this post by SharksBreath:
FCVadi (11-06-2013),
Healingduck (11-06-2013)
Trending Topics
#10
#15
Suzuka Master
Your gonna need more than a roll on those fenders. Should have gone 8.75 or less aggressive on the offset. Sounds like a decent plan. Dont waste money on performance upgrades its to expensive for the return. I would save for college too.
#17
Moderator
iTrader: (3)
Welcome and congrats!
As Ross stated before, I would do the A-Spec kit next. If you can't afford the full kit, just start with the front lip. From there you can do the exhaust and headlight/taillight stuff
Lets see some pictures
As Ross stated before, I would do the A-Spec kit next. If you can't afford the full kit, just start with the front lip. From there you can do the exhaust and headlight/taillight stuff
Lets see some pictures
#18
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Welcome to AcuraZine.
#19
Thanks guys!
hopefully ill be able to deliver pics this weekend, going to try to get my hands on a fender rolling tool and go a tad bit lower than where i am now
anyone have a clue if my oem centercaps from my base wheels will fit in the 527s?
those xxr caps are driving me crazy!!
hopefully ill be able to deliver pics this weekend, going to try to get my hands on a fender rolling tool and go a tad bit lower than where i am now
anyone have a clue if my oem centercaps from my base wheels will fit in the 527s?
those xxr caps are driving me crazy!!
#24
Where it sits now, would like to go a little lower.
Wishing i didnt get the FF type 1s because the springs are too soft. Im not even that low and still rub in the rears which im rolling tomorrow
Wishing i didnt get the FF type 1s because the springs are too soft. Im not even that low and still rub in the rears which im rolling tomorrow
Thread
Thread Starter
Forum
Replies
Last Post
nanos
Car Parts for Sale
26
11-12-2015 08:41 PM
Mugen TSX
Eastern Canada
0
09-01-2015 11:05 PM