Front grill?
#1
Intermediate
Thread Starter
Join Date: May 2012
Location: Baltimore Maryland
Age: 35
Posts: 43
Likes: 0
Received 3 Likes
on
3 Posts
Front grill?
I need some dIY help. I couldn't find it on the forum or interweb. How exactly does the front grill come out/off? I want to paint it black but I'm not about to just go ripping n pulling
#2
Theres a DIY in the garage let me find it but in either case you could plastidip it. I plasti dipped mine it's great because it gets what you want black and what you didn't want to rub off
Edit:: https://acurazine.com/forums/3g-tl-2004-2008-93/e-073-diy-custom-grill-mod-cutting-adding-grill-mesh-lots-pics-748647/
Instructions weren't too clear but sounds easy enough
Edit:: https://acurazine.com/forums/3g-tl-2004-2008-93/e-073-diy-custom-grill-mod-cutting-adding-grill-mesh-lots-pics-748647/
Instructions weren't too clear but sounds easy enough
Last edited by jonmizu; 06-18-2012 at 05:39 AM.
#4
BANNED
iTrader: (33)
i originally wrapped mine in 3M glossy black vinyl.
BEFORE
AFTER
then i got bored of that look and decided to do the sharksmouth grill and mesh in the lower aspec grill corners.
by the way, i live in baltimore maryland as well. if you need any help with this project, feel free to contact me and we'll set up a date and time.
#8
Krack3r,
i originally wrapped mine in 3M glossy black vinyl.
BEFORE
AFTER
then i got bored of that look and decided to do the sharksmouth grill and mesh in the lower aspec grill corners.
by the way, i live in baltimore maryland as well. if you need any help with this project, feel free to contact me and we'll set up a date and time.
i originally wrapped mine in 3M glossy black vinyl.
BEFORE
AFTER
then i got bored of that look and decided to do the sharksmouth grill and mesh in the lower aspec grill corners.
by the way, i live in baltimore maryland as well. if you need any help with this project, feel free to contact me and we'll set up a date and time.
#10
Safety Car
iTrader: (7)
Not really digging any of the plasti-dip finishes. Yeah it's a quicker, cheaper, and easier alternative to vinyl wrapping but it doesn't give you that nice GLOSSY SHINY BLACK finish.
The dull, flat/matte black finish of the plasti dip makes it look pretty cheesy...
If anyone prefers plasti dip grill compared to "sharksbreath" gloss black vinyl grill than you're blind...
Gloss Black Vinyl >>>> Plastidip when it comes to front and rear trim
The dull, flat/matte black finish of the plasti dip makes it look pretty cheesy...
If anyone prefers plasti dip grill compared to "sharksbreath" gloss black vinyl grill than you're blind...
Gloss Black Vinyl >>>> Plastidip when it comes to front and rear trim
#13
the overexplainer
i always wash my car by hand, but there is a chance yes. It just takes a few good rubs with moderate pressure with your finger to start rolling plastidip off.
touchless wash may be better suited if you have to use an automated wash.
touchless wash may be better suited if you have to use an automated wash.
#14
Intermediate
Thread Starter
Join Date: May 2012
Location: Baltimore Maryland
Age: 35
Posts: 43
Likes: 0
Received 3 Likes
on
3 Posts
http://i1161.photobucket.com/albums/...4/ddc2b9aa.jpg
http://i1161.photobucket.com/albums/...4/6aecdb0b.jpg
Thanks for all the info and pointers guys here's the results
http://i1161.photobucket.com/albums/...4/6aecdb0b.jpg
Thanks for all the info and pointers guys here's the results
The following users liked this post:
jonmizu (06-21-2012)
#16
I like turtles
http://i1161.photobucket.com/albums/...4/ddc2b9aa.jpg
http://i1161.photobucket.com/albums/...4/6aecdb0b.jpg
Thanks for all the info and pointers guys here's the results
http://i1161.photobucket.com/albums/...4/6aecdb0b.jpg
Thanks for all the info and pointers guys here's the results
#17
I thought about it but honestly I doubt any harm will come from it You figure there's people that spray there rims while it's still on the car so all of it ends up on the rotors etc that sounds way more dangerous
#18
I like turtles
Thread
Thread Starter
Forum
Replies
Last Post
TLDude876
Car Talk
134
12-28-2016 03:18 PM