Does anyone know what the HECK goes here??
#1
Racer
Thread Starter
Does anyone know what the HECK goes here??
I thought this would be the switch to turn on/off the parking sensors. But it isn't. Does anyone know of an OEM switch that goes here? Maybe Canadian Windshield washers?
#2
Race Director
iTrader: (8)
It's a blank - nothing is "supposed" to go there.
Anything "can" go there.
Anything "can" go there.
The following users liked this post:
EvilVirus (04-14-2014)
#6
Instructor
Join Date: Feb 2014
Location: Little Rock, AR. Soon to be Houston, TX.
Posts: 109
Likes: 0
Received 28 Likes
on
15 Posts
Im pretty sure you can put an OEM fog lamp switch in there. Im new to the forum so dont take my word for it, but Im almost positive ive seen it done in another tread.
Trending Topics
#8
Senior Moderator
iTrader: (1)
VTEC switch.....jk
I have my accord fog switch in that spot.
I have my accord fog switch in that spot.
The following users liked this post:
Corey_Straker (04-14-2014)
The following users liked this post:
Corey_Straker (04-14-2014)
#13
Safety Car
iTrader: (4)
I think the OP is getting at something else here. We know there was no oem switch that goes in that spot on the 3G TL, but maybe the better question would be why did they make it that way if nothing ever went in there. My only guess is that exact panel is used in another vehicle that does have a switch that goes there. Otherwise it would have been completely pointless for them to make a slot for a switch. Maybe the MDX uses that same panel and has an additional switch for whatever, or maybe that's for CDM models and is a power folding mirror button slot. Who knows......
#14
Race Director
iTrader: (8)
I think the OP is getting at something else here. We know there was no oem switch that goes in that spot on the 3G TL, but maybe the better question would be why did they make it that way if nothing ever went in there. My only guess is that exact panel is used in another vehicle that does have a switch that goes there. Otherwise it would have been completely pointless for them to make a slot for a switch. Maybe the MDX uses that same panel and has an additional switch for whatever, or maybe that's for CDM models and is a power folding mirror button slot. Who knows......
Plus, symmetry lol
Last edited by guitarplayer16; 04-14-2014 at 04:51 PM.
#15
[x] FWCC [x]
lol i used that slot for my car alarm button ...i want to use the OEM fog switch on the steering wheel since i made my own harness for the foglights. They turn on only when all headlights are on.
The following users liked this post:
rockyfeller (04-15-2014)
#18
I wonder if that spot has anything to do with the weird light bar at the bottom of the back bumper on the Chinese market TL. Possibly a rear fog-light built into it.
Ignore red circles:
Ignore red circles:
#20
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
You mean, your TL didn't come with the passenger ejection seat?
The following users liked this post:
Corey_Straker (04-18-2014)
#21
[x] FWCC [x]
#22
Race Director
iTrader: (1)
I set up mine to dispense my favorite single malt...
The following 2 users liked this post by maharajamd:
Acura_Dude (04-17-2014),
justnspace (04-17-2014)
#23
Race Director
The first rule of switch club is to never talk about switch club!!!!
#26
Racer
^This, I'm pretty sure the location was used for the Chinese TL's rear fog light (the red bar) switch.
#28
Team Owner
I think the OP is getting at something else here. We know there was no oem switch that goes in that spot on the 3G TL, but maybe the better question would be why did they make it that way if nothing ever went in there. My only guess is that exact panel is used in another vehicle that does have a switch that goes there. Otherwise it would have been completely pointless for them to make a slot for a switch. Maybe the MDX uses that same panel and has an additional switch for whatever, or maybe that's for CDM models and is a power folding mirror button slot. Who knows......
For my car it's getting ready to get a remote bass knob. I'm glad JL offers a black hardware kit to replace the chrome/steel so it's all black. I hate aftermarket knobs and crap showing. The main thing is to keep it out of reach of passengers which makes it a perfect spot.
#29
Racer
Thread Starter
If only I would have had one years ago... Would have saved me a lot of trouble.
That looks really good.
That's what I was wondering, it has to be used for something somewhere else. I wonder if there's a plug for an additinoal switch in the wiring harness up under the dash. I remember all of GM's optional accessory wiring was already there. To add a remove trunk release to my GN all I had to do was get the button and the solenoid out of a junk yard and plug it into the harness. Same with the methanol injection and light on the dash.
For my car it's getting ready to get a remote bass knob. I'm glad JL offers a black hardware kit to replace the chrome/steel so it's all black. I hate aftermarket knobs and crap showing. The main thing is to keep it out of reach of passengers which makes it a perfect spot.
That looks really good.
That's what I was wondering, it has to be used for something somewhere else. I wonder if there's a plug for an additinoal switch in the wiring harness up under the dash. I remember all of GM's optional accessory wiring was already there. To add a remove trunk release to my GN all I had to do was get the button and the solenoid out of a junk yard and plug it into the harness. Same with the methanol injection and light on the dash.
For my car it's getting ready to get a remote bass knob. I'm glad JL offers a black hardware kit to replace the chrome/steel so it's all black. I hate aftermarket knobs and crap showing. The main thing is to keep it out of reach of passengers which makes it a perfect spot.
#31
Suzuka Master
iTrader: (1)
As I know red part on the lower bumper is just a reflector. No rear fog
Main purpose of it is to move the reverse bulbs due to license plate being wider.
Main purpose of it is to move the reverse bulbs due to license plate being wider.
#32
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,634
Received 2,328 Likes
on
1,308 Posts
I used it as an 'Oil Slick Dispenser' button on my '05 TL. Came in handy during some tight courier runs..
#34
[x] FWCC [x]
Interesting. I just noticed that the car was missing something. I completely forgot the reverse lights is right next to the license plate ..
Thread
Thread Starter
Forum
Replies
Last Post
Greengecko
3G TL Audio, Bluetooth, Electronics & Navigation
4
09-16-2015 08:19 PM