car not passing 5500 rpm while driving
#1
car not passing 5500 rpm while driving
Hellow i have a 07 tl i put a new alternator and i was testing the car and when i rev the engine while driving the car is not passing the 5500 rpm i dont have no engine light and car is running perfect is just doing that to me is like it have the safe mode that tl have while is in park and u rev it... all the time what can be casuning this oil level is good vtec engage on time too i replace the engine no so long ago but since i replaced i never rev the engine that far so i just notice this happening yesterday the car is running perfect no transmission systoms or anything it just dont let me rev up until redline... it cutoff at 5500 rpm .u guys think this some computer related problem
#3
Latent car nut
iTrader: (2)
Join Date: Jan 2017
Location: Southern New Hampshire
Age: 68
Posts: 7,844
Received 2,005 Likes
on
1,407 Posts
#5
mine is not oil ralated oil is on right level idk where to start really since the car is runing fine no code no engine light
#6
Latent car nut
iTrader: (2)
Join Date: Jan 2017
Location: Southern New Hampshire
Age: 68
Posts: 7,844
Received 2,005 Likes
on
1,407 Posts
The following users liked this post:
90foxnotch (10-09-2018)
Trending Topics
#8
Burning Brakes
Being an auto trans it could be a number of things. Not sure if it will throw a wrench light for a trans issue but it is a good idea to have the car checked for any codes, from my experience you can have active codes but no light showing.
#10
Latent car nut
iTrader: (2)
Join Date: Jan 2017
Location: Southern New Hampshire
Age: 68
Posts: 7,844
Received 2,005 Likes
on
1,407 Posts
I believe I read somewhere the governor when the transmission is in neutral or park is more like 3,200 RPMs. Don't remember where I read that.
#11
The following users liked this post:
Slpr04UA6 (10-13-2018)
Thread
Thread Starter
Forum
Replies
Last Post
heyitsvu
2G TL (1999-2003)
52
10-10-2018 08:14 AM
AJ Sandoval
3G TL Problems & Fixes
27
05-25-2015 03:41 PM
heyitsvu
2G CL (2001-2003)
7
10-04-2008 12:09 PM