XLR8 Custom Aluminum Radiators
#1
XLR8 Custom Aluminum Radiators
This is an Acurazine special pricing event for our very own XLR8 Custom Aluminum Radiators for the 01-03 CL, CL-S, 99-03 TL, TL-S. More applications will be coming. Here are some advantages to our aluminum radiator:
- Good up to 450 HP
- Almost double the cooling capacity of the OE radiator
- 100% Hand-built in the USA
- Hand TIG welded
- 100% aluminum
- 2 year warranty against manufacturer defects
- Adds to the aesthetic value of the engine bay
The stock radiator on the 2nd gen CL/TL's have top and bottom plastic tanks that are 1" thick and the core is only .75" thick.
Our radiators have aluminum top and bottom tanks that are 2.25" thick with one row of 1.5" tubes, doubling the stock setup. The radiator is hand TIG welded and the tube to header joint is further supported by being furnace brazed with epoxy (inside and out) to help absorb viabrations and stress. This will help ensure the longevity of the radiator and virtually double its life. Also our radiators have the option of either having a regular style straight spout or an upper spout with a 90 degree angle to accomodate blower (supercharger) clearance.
Our radiators are designed to work with the OEM fans. For vehicles with superchargers, there may be some trimming of the fan shrouds. These radiators ar twice as thick so it is possible that there might be some trimming involved, but only with the fan shrouds. We have tested the 90 degree spouts on a 00 Acura TL-P and it cleared fine, as you can see above, with the blower. It should clear fine with the TL-S, CL-S blower setups also but we will need to test fit one to be sure.
Here are some pictures courtesy of CleanCL and njzpretty boy.
And here is a link to a DIY by CleanCL also: https://acurazine.com/forums/showthread.php?t=187600
Shipping times will depend on your location. I can have these made in 1-2 weeks so I would like to get a few guys to get a production run going.
The following payment terms are accepted: Bank or Teller Check, Money Order, sent to:
Excelerate LLC
998 West Main St
Branford, CT 06405
You may also send payment to Excelerate@sbcglobal.net via Paypal. However, if you pay through Paypal you must add 3% to the transaction. When you send payment specify what you're ordering, for what vehicle, and what style spout you would like. There are different style radiators so I must know your year.
XLR8 Custom Aluminum Radiator - $485 shipped
AIM Screen Name: Excelerate04
E-mail: Excelerate@sbcglobal.net
or PM me.
RETURN POLICY
- ALL RETURNED AND/OR CANCELLED ORDERS ARE SUBJECT TO A 25% RE-STOCKING FEE PLUS ALL SHIPPING CHARGES (Includes original and return S&H fees).
- ALL AUTHORIZED RETURN MERCHANDISE MUST BE NEW, UNUSED, AND IN ITS ORIGINAL PACKAGING. ALL DOCUMENTATION, WARRANTY CARDS, INSTRUCTIONS, AND HARDWARE MUST ALSO BE RETURNED.
- ITEMS MAY BE RETURNED WITHIN 15 CALENDAR DAYS FROM THE RECEIPT OF MERCHANDISE.
- SPECIAL ORDERS ARE NOT RETURNABLE.
- ALL DEPOSITS ARE NON-REFUNDABLE.
EXCELERATE LLC
998 West Main St
Branford, CT 06405
(P) 203-483-6100 (F) 203-483-6101
www.ExceleratePerformance.com
Joshua Lockwood
Owner
- Good up to 450 HP
- Almost double the cooling capacity of the OE radiator
- 100% Hand-built in the USA
- Hand TIG welded
- 100% aluminum
- 2 year warranty against manufacturer defects
- Adds to the aesthetic value of the engine bay
The stock radiator on the 2nd gen CL/TL's have top and bottom plastic tanks that are 1" thick and the core is only .75" thick.
Our radiators have aluminum top and bottom tanks that are 2.25" thick with one row of 1.5" tubes, doubling the stock setup. The radiator is hand TIG welded and the tube to header joint is further supported by being furnace brazed with epoxy (inside and out) to help absorb viabrations and stress. This will help ensure the longevity of the radiator and virtually double its life. Also our radiators have the option of either having a regular style straight spout or an upper spout with a 90 degree angle to accomodate blower (supercharger) clearance.
Our radiators are designed to work with the OEM fans. For vehicles with superchargers, there may be some trimming of the fan shrouds. These radiators ar twice as thick so it is possible that there might be some trimming involved, but only with the fan shrouds. We have tested the 90 degree spouts on a 00 Acura TL-P and it cleared fine, as you can see above, with the blower. It should clear fine with the TL-S, CL-S blower setups also but we will need to test fit one to be sure.
Here are some pictures courtesy of CleanCL and njzpretty boy.
And here is a link to a DIY by CleanCL also: https://acurazine.com/forums/showthread.php?t=187600
Shipping times will depend on your location. I can have these made in 1-2 weeks so I would like to get a few guys to get a production run going.
The following payment terms are accepted: Bank or Teller Check, Money Order, sent to:
Excelerate LLC
998 West Main St
Branford, CT 06405
You may also send payment to Excelerate@sbcglobal.net via Paypal. However, if you pay through Paypal you must add 3% to the transaction. When you send payment specify what you're ordering, for what vehicle, and what style spout you would like. There are different style radiators so I must know your year.
XLR8 Custom Aluminum Radiator - $485 shipped
AIM Screen Name: Excelerate04
E-mail: Excelerate@sbcglobal.net
or PM me.
RETURN POLICY
- ALL RETURNED AND/OR CANCELLED ORDERS ARE SUBJECT TO A 25% RE-STOCKING FEE PLUS ALL SHIPPING CHARGES (Includes original and return S&H fees).
- ALL AUTHORIZED RETURN MERCHANDISE MUST BE NEW, UNUSED, AND IN ITS ORIGINAL PACKAGING. ALL DOCUMENTATION, WARRANTY CARDS, INSTRUCTIONS, AND HARDWARE MUST ALSO BE RETURNED.
- ITEMS MAY BE RETURNED WITHIN 15 CALENDAR DAYS FROM THE RECEIPT OF MERCHANDISE.
- SPECIAL ORDERS ARE NOT RETURNABLE.
- ALL DEPOSITS ARE NON-REFUNDABLE.
EXCELERATE LLC
998 West Main St
Branford, CT 06405
(P) 203-483-6100 (F) 203-483-6101
www.ExceleratePerformance.com
Joshua Lockwood
Owner
#3
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
OMG i want one, but it won't fit my car
Trending Topics
#8
New ride...Acura MDX 2013
Originally Posted by Excelerate
To promote the product I am going to run a special for the first five orders. $450 shipped and no Paypal/CC fees. So this will be a savings of $50.
#16
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
07-16-2017 07:33 AM
08_UA7_Gr33k
Member Cars for Sale
13
02-11-2016 02:17 PM
kixo
2G TSX (2009-2014)
43
09-25-2015 03:07 PM