Excelerate

iTrader: (1)

No it means they couldn't adjust it properly without aftermarket components.

Poly is firmer and not really for street cars unless you don't mind some vibration.

Dpak

hey is this sale still good?

Excelerate

iTrader: (1)

Actually all pricing can now be found on our web store at http://store.excelerateperformance.com

timportspeed

Hey excelerate, I have an 08 TL type S, if i drop the front 2.25" and the rear 2.0", which front camber kit would i need? Or does anybody out there with a slammed 04-08 TL know which front camber kit i would need for my car?

Excelerate

iTrader: (1)

Well you won't know for certain until you get an alignment but according to Ingalls you will want to get part #35591:

http://store.excelerateperformance.c...1/i-60160.aspx

That is the adjustable ball joint for the front.

Excelerate

iTrader: (1)

All pricing is on the web store now at http://store.excelerateperformance.com

VoLLy

iTrader: (8)

Hey excelerate, i need both front and rear camber kits here are my alignment specs (dropped on Tein Basics, fronts are maxed out, rears have 3-4 threads left but still pretty low) , plz let me know which kit i need!

Excelerate

iTrader: (1)

All pricing now on the website at http://store.excelerateperformance.com

Most Ingalls parts for the Acura CL, TL, TSX in stock!!!

Bonez21

iTrader: (3)

Need a quote for front and rear camber kit fot 2001 CL-s

Bonez21

iTrader: (3)

I can acess website from my phone, need wuote on front n rear for 01 CL's shipped to 10566

Excelerate

iTrader: (1)

The camber kits cost about $310 for the front and rear set for a 01 CL-S plus shipping. I will need your zip code. I will also need to know how much your camber is off in the front or (if you don't know that) how much your vehicle is lowered in the front.

HorizonCL-s6

Which front camber kit would you recommend getting for a 1.25-1.75" drop on a 03 cl-s with Tein street basis? Daily Driving in MN so I probably wont go lower than that because of the terrible roads.

ExcelerateRep

I highly recommend the Ingalls front balljoint that can adjust +1.5 to +3 and is only $80.27 per side. These are ideal for any can that will be lowered more than an inch. We also have these in stock so we can ship them out today.
Ingalls Alignment Kit - Excelerate Performance - Japanese and European Performance Specialists!!

HorizonCL-s6

Should I do all four corners at the same time or is the front more important? From the alignment spec sheets that I have been able to find the front usually stays in factory spec (around -1 degree camber) while the rear goes way out to -3 degrees sometimes. Obviously toe in will shred tires a lot quicker than a -1 degree camber in the front. I just want to be able to save my tires without breaking the bank and fixing a -3 camber in the rear seems more beneficial than the -1 in the front.. $80 is a great deal tho

ExcelerateRep

It's fine if you only want to do the rear camber kits. You can wait to do the front corners down the road if they are still pretty close within spec!