EXCELERATE PERFORMANCE: Ingalls Camber Kit and Engine Damper Sale!!!
#1
Former Sponsor
Thread Starter
EXCELERATE PERFORMANCE: Ingalls Camber Kit and Engine Damper Sale!!!
![](http://i34.photobucket.com/albums/d121/Excelerate/XLR8LogoJPG.jpg)
This is an Acurazine Special Sales Event for Ingalls' Camber Kits and the Engine Torque Damper. The pricing event will consist of the Ingalls' Camber Kits for Acura vehicles.
![](http://coximport.com.s3.amazonaws.com/image/2/ingalls-logo.png)
![](http://i34.photobucket.com/albums/d121/Excelerate/ING-35590.gif)
Ingalls Adjustable Front Upper Control Arm Ball Joint
Featuring the lowest profile of any adjustable ball joint on the market. These ball joints replace the non-adjustable O.E. ball joint and are indexed to make accurate installation easy. Ingalls Engineering Company’s patented adjustable ball joints have ample stud travel to eliminate binding. They also include a larger stud base and heavy-duty boot and retainer for long service life.
![](http://i34.photobucket.com/albums/d121/Excelerate/ING-38720.gif)
Ingalls SmartArm Rear Adjustable Lower Links (Rubber) Replaces Both Lower Arms. ONLY Honda/Acura kit that properly adjusts camber and toe!
Newly redesigned, SmartArm Links feature forged steel ends for maximum strength. Most can be installed either on the left or right side of the vehicle (depending on application) with an adjustment range from -2° to +3° depending on the application.
![](http://i34.photobucket.com/albums/d121/Excelerate/INGETD.gif)
![](http://i34.photobucket.com/albums/d121/Excelerate/INGETD-TSX.gif)
A self-contained elastomeric shock that mounts on brackets between the engine and the chassis. It reduces extreme engine movement and dampens the motion, providing many benefits:
- Greatly improved off-the-line acceleration
- Reduced wheel hop
- Improved vehicle stability
- Reduced shock loads on driveline components
- Smoother shifting
- Reduced wear on exhaust system joints
- Less vibration transmission to the driver compared to polyurethane motor mounts.
- Less shock load, compared to torque straps and chains.
- Drifting – helps reduce shock loads when wheels gain traction.
- Reduces motor movement – decreases the chance of motor parts rubbing against the hood and frame.
http://store.excelerateperformance.c...202&Make=ACURA
Here are links to some of the more common kit parts:
Acura: 01-03 CL, 96 - 08 TL, 04-08 TSX- Front Camber Kit Part #35590
http://store.excelerateperformance.c...0/i-60159.aspx
Acura: 01-03 CL, 96 - 08 TL, 04-08 TSX- Front Camber Kit Part #35591
http://store.excelerateperformance.c...1/i-60160.aspx
Acura: 99-02 TL, 03 TL*, 01-03 CL- Rear Camber Kit Part #38720
http://store.excelerateperformance.c...0/i-60219.aspx
Acure: 03 TL*, 04-08 TSX, 03-06 3.5 RL- Rear Camber Kit Part #38725
http://store.excelerateperformance.c...5/i-60220.aspx
*38725 for Vehicles with un-equal length arms, 38720 for vehicles with equal length arms.
In order to determine what camber kit you need it is best to have an alignment first so that you can determine how much your camber is off. Ingalls recommends certain part #'s based on ride height drop. Therefore we recommend part #'s based on specific ride height drops, but it is not definitive nor 100% accurate. Therefore it is the responsibility of the consumer to determine what kit they need.
AIM Screen Name: Excelerate04
E-mail: Sales@ExceleratePerformance.com
or PM me.
RETURN POLICY
- ALL RETURNED AND/OR CANCELLED ORDERS ARE SUBJECT TO A 25% RE-STOCKING FEE PLUS ALL SHIPPING CHARGES (Includes original and return S&H fees).
- ALL AUTHORIZED RETURN MERCHANDISE MUST BE NEW, UNUSED, AND IN ITS ORIGINAL PACKAGING. ALL DOCUMENTATION, WARRANTY CARDS, INSTRUCTIONS, AND HARDWARE MUST ALSO BE RETURNED.
- ITEMS MAY BE RETURNED WITHIN 15 CALENDAR DAYS FROM THE RECEIPT OF MERCHANDISE.
- SPECIAL ORDERS ARE NOT RETURNABLE.
- ALL DEPOSITS ARE NON-REFUNDABLE.
EXCELERATE LLC
998 West Main St
Branford, CT 06405
(P) 203-483-6100 (F) 203-483-6101
www.ExceleratePerformance.com
#2
Former Sponsor
Thread Starter
Sale continues!!!
#5
Former Sponsor
Thread Starter
Here is the link for the Ingalls Torque Damper for the 03 TL-S:
http://store.excelerateperformance.c.../i-389457.aspx
http://store.excelerateperformance.c.../i-389457.aspx
#8
So I just got my alignment today and everything was pretty much dead on except
Left Front Caster was 1.9
Right Front Camber -1.1
Right rear Camber was -1.8
All were in the red
So the only parts i need are
Acura: 01-03 CL, 96 - 08 TL, 04-08 TSX- Front Camber Kit Part #35590
http://store.excelerateperformance.c...0/i-60159.aspx
Acura: 01-03 CL, 96 - 08 TL, 04-08 TSX- Front Camber Kit Part #35591
http://store.excelerateperformance.c...1/i-60160.aspx
Which rear kit do I need? I dont see one for a 05 TL
Left Front Caster was 1.9
Right Front Camber -1.1
Right rear Camber was -1.8
All were in the red
So the only parts i need are
Acura: 01-03 CL, 96 - 08 TL, 04-08 TSX- Front Camber Kit Part #35590
http://store.excelerateperformance.c...0/i-60159.aspx
Acura: 01-03 CL, 96 - 08 TL, 04-08 TSX- Front Camber Kit Part #35591
http://store.excelerateperformance.c...1/i-60160.aspx
Which rear kit do I need? I dont see one for a 05 TL
#9
Former Sponsor
iTrader: (1)
So I just got my alignment today and everything was pretty much dead on except
Left Front Caster was 1.9
Right Front Camber -1.1
Right rear Camber was -1.8
All were in the red
So the only parts i need are
Acura: 01-03 CL, 96 - 08 TL, 04-08 TSX- Front Camber Kit Part #35590
http://store.excelerateperformance.c...0/i-60159.aspx
Acura: 01-03 CL, 96 - 08 TL, 04-08 TSX- Front Camber Kit Part #35591
http://store.excelerateperformance.c...1/i-60160.aspx
Which rear kit do I need? I dont see one for a 05 TL
Left Front Caster was 1.9
Right Front Camber -1.1
Right rear Camber was -1.8
All were in the red
So the only parts i need are
Acura: 01-03 CL, 96 - 08 TL, 04-08 TSX- Front Camber Kit Part #35590
http://store.excelerateperformance.c...0/i-60159.aspx
Acura: 01-03 CL, 96 - 08 TL, 04-08 TSX- Front Camber Kit Part #35591
http://store.excelerateperformance.c...1/i-60160.aspx
Which rear kit do I need? I dont see one for a 05 TL
#10
OK second series of questions.. lol
Whats the difference between the front two camber kits.
I am looking to order some H&R coilovers within the next few months. Is this going to be ok with these camber kits?
When is this sale over?
Thanks for your help
Whats the difference between the front two camber kits.
I am looking to order some H&R coilovers within the next few months. Is this going to be ok with these camber kits?
When is this sale over?
Thanks for your help
#12
Former Sponsor
Thread Starter
Ingalls ready to ship!
#13
Former Sponsor
iTrader: (1)
Just for reference those with a 2003 TL you will need to examine your two rear lower arms (#11 and 12 in this illustration:
![](http://www.acuraoemparts.com/delray/jsp/catimgs/13s0k0_b29.gif)
We will need to know if those two arms are parallel to each other or offset? Or you can measure from the center of each of bolt holding each arm and tell us the length. This will determine whether you will order 38720 or 38725.
![](http://www.acuraoemparts.com/delray/jsp/catimgs/13s0k0_b29.gif)
We will need to know if those two arms are parallel to each other or offset? Or you can measure from the center of each of bolt holding each arm and tell us the length. This will determine whether you will order 38720 or 38725.
#15
Former Sponsor
iTrader: (1)
Add to cart and put in a quantity of 2. Then put in your zip code to see the shipping cost. Let me know if you have any other questions. Thanks.
#18
Three Wheelin'
my camber is perfect at the moment but i'm looking to drop it, perhaps with some H&R springs over stock shocks or some Koni shocks over the oem springs. i'm trying to gauge how much i'm looking to spend with the different choices, including camber kits.
#19
Former Sponsor
iTrader: (1)
Just put in your vehicle info and look under Ingalls or Suspension. Ingalls shows camber kits for the front and rear based on how much your camber is off. Remember that all kits are sold per side so you will need 2 to complete the front or rear of a car. Let me know if you have any questions.
#21
Former Sponsor
iTrader: (1)
http://store.excelerateperformance.com
#22
Former Sponsor
iTrader: (1)
Just for reference those with a 2003 TL you will need to examine your two rear lower arms (#11 and 12 in this illustration:
![](http://www.acuraoemparts.com/delray/jsp/catimgs/13s0k01_b29.png)
We will need to know if those two arms are parallel to each other or offset? Or you can measure from the center of each of bolt holding each arm and tell us the length. This will determine whether you will order 38720 or 38725.
![](http://www.acuraoemparts.com/delray/jsp/catimgs/13s0k01_b29.png)
We will need to know if those two arms are parallel to each other or offset? Or you can measure from the center of each of bolt holding each arm and tell us the length. This will determine whether you will order 38720 or 38725.
#27
Former Sponsor
iTrader: (1)
These are my numbers, can you let me know which parts do I need????
Camber:
Front-left = -1.3 Front-right = -1.1
Rear-left = -1.9 Rear-right = -1.6
everything else is within specs..... Thanks in advance for your input.
2005 3g tl 6mt...... On Tein coilovers 13 3/4" from center of wheel hub to fender....
Camber:
Front-left = -1.3 Front-right = -1.1
Rear-left = -1.9 Rear-right = -1.6
everything else is within specs..... Thanks in advance for your input.
2005 3g tl 6mt...... On Tein coilovers 13 3/4" from center of wheel hub to fender....
Front Adjustable Ball Joint (will offset up to -1.5 degrees of camber):
http://store.excelerateperformance.c...0/i-60159.aspx
Rear Camber/Toe Kit (will offset up to -3 degrees of camber):
http://store.excelerateperformance.c...5/i-60220.aspx
Thread
Thread Starter
Forum
Replies
Last Post
sockr1
Car Parts for Sale
22
10-01-2015 01:31 AM
nuldabz
3G TL Tires, Wheels & Suspension
3
09-03-2015 05:49 PM