San Diego Meets and Events Part Tres
03-06-2013, 07:20 PM
#7921
keep it clean
Is there a meet today? If so, anyone down to go?
03-08-2013, 12:36 PM
#7922
Hey gentleman, I think its time we all have a meet. there is one coming up here in two weeks we should all attend.
https://acurazine.com/forums/showthr...=880428&page=2
https://acurazine.com/forums/showthr...=880428&page=2
03-08-2013, 05:34 PM
#7923
keep it clean
Yea, we can't have the locals not show up.
03-08-2013, 11:15 PM
#7924
Suzuka Master
Yeah that looks promising
03-10-2013, 03:41 PM
#7925
I'll be making it.
Some new toys on the way. Have new 62a mounts from Excelerate arriving tomorrow and new brakes on tuesday. I can't wait for the mounts though.
Also starting to look into getting the car painted again but not sure if I want to cause the parking at my complex is so tight and door dings are a bitch.
Might talk to a few detailers and see what they can do with my paint. Any suggestions on mobile detailers gentleman?
Some new toys on the way. Have new 62a mounts from Excelerate arriving tomorrow and new brakes on tuesday. I can't wait for the mounts though.
Also starting to look into getting the car painted again but not sure if I want to cause the parking at my complex is so tight and door dings are a bitch.
Might talk to a few detailers and see what they can do with my paint. Any suggestions on mobile detailers gentleman?
03-10-2013, 09:43 PM
#7926
Intermediate
Any 3G TL 6MT owners looking for back up axles? Just trying to get rid of some brand new front axles for the low since I don't have my TL anymore. 200 bucks for brand new OEM. PM me
03-18-2013, 02:49 AM
#7927
bloop
Splitter project: this is some drawings for the splitter project I'm working on I'm about 80% done not sure to go with version 1 , 2, or 2 + winglets
Random image of the Mustang and TL:
P.S. sorry John I got really busy this weekend and couldn't drop off the springs!
Splitter project: this is some drawings for the splitter project I'm working on I'm about 80% done not sure to go with version 1 , 2, or 2 + winglets
Random image of the Mustang and TL:
P.S. sorry John I got really busy this weekend and couldn't drop off the springs!
03-18-2013, 03:44 PM
#7928
keep it clean
bloop
Splitter project: this is some drawings for the splitter project I'm working on I'm about 80% done not sure to go with version 1 , 2, or 2 + winglets
Random image of the Mustang and TL:
P.S. sorry John I got really busy this weekend and couldn't drop off the springs!
Splitter project: this is some drawings for the splitter project I'm working on I'm about 80% done not sure to go with version 1 , 2, or 2 + winglets
Random image of the Mustang and TL:
P.S. sorry John I got really busy this weekend and couldn't drop off the springs!
03-19-2013, 12:32 AM
#7930
Thanks I've had the mustang for forever but it still needs A LOT of work lol. Yeah I think I had the type-s bumper at the last meet I went to but I still haven't hooked up the actual fog lights. I just carbon vinyl wrapped the lower grill aluminum bars and some the two silver trim pieces going down the center console this past weekend trying to do the door trims wrapping this weekend and hopefully actually install the HID kit for my fogs soon. But I'm really excited for the splitter to be done but it's taking forever I might start over as well as finish the one I'm working on selling it.
03-19-2013, 06:20 PM
#7931
keep it clean
I might be going, if I can get some errands done earlier in the day, but definitely a meet that I don't want to miss since some of the OC members are rolling through.
Yea, custom DIY parts are very time consuming projects. I can't wait to see the final product. Let me know if you need help with the Fogs.
Thanks I've had the mustang for forever but it still needs A LOT of work lol. Yeah I think I had the type-s bumper at the last meet I went to but I still haven't hooked up the actual fog lights. I just carbon vinyl wrapped the lower grill aluminum bars and some the two silver trim pieces going down the center console this past weekend trying to do the door trims wrapping this weekend and hopefully actually install the HID kit for my fogs soon. But I'm really excited for the splitter to be done but it's taking forever I might start over as well as finish the one I'm working on selling it.
03-23-2013, 01:48 PM
#7934
Suzuka Master
Daughter is home for spring break! not makin it to the meet.
Kevin you can drop them on the porch anytime.
Kevin you can drop them on the porch anytime.
The following users liked this post:
pohljm (03-28-2013)
03-27-2013, 02:28 PM
#7936
keep it clean
Thanks I've had the mustang for forever but it still needs A LOT of work lol. Yeah I think I had the type-s bumper at the last meet I went to but I still haven't hooked up the actual fog lights. I just carbon vinyl wrapped the lower grill aluminum bars and some the two silver trim pieces going down the center console this past weekend trying to do the door trims wrapping this weekend and hopefully actually install the HID kit for my fogs soon. But I'm really excited for the splitter to be done but it's taking forever I might start over as well as finish the one I'm working on selling it.
04-22-2013, 11:19 PM
#7940
Suzuka Master
getting hungry for Pho?
04-23-2013, 04:29 PM
#7941
keep it clean
^ Been a while since we had a meet to grab some Pho. I'm in.
04-27-2013, 04:00 PM
#7944
keep it clean
Hi Guys, anyone looking for aspec wheels. Good deal on some 18x8 with tires. http://sandiego.craigslist.org/ssd/pts/3770216846.html
04-27-2013, 06:25 PM
#7945
Suzuka Master
did these sell? link does not work
04-27-2013, 07:24 PM
#7946
keep it clean
04-27-2013, 07:45 PM
#7947
Suzuka Master
nice try anyway!
05-01-2013, 05:58 PM
#7949
keep it clean
Good eye. I saw these, but they're not close to the condition the other set was.
I took a look a the set i posted in person because I wanted to see if they were 8.5 width, but ended up being 8", so I posted the link since I felt someone would benefit from the great price. Not to throw salt on any wounds from missing this offer, but she was selling them for $400 with descent tires.
However, if the set you posted, was for a better price I'm sure someone will snatch it.
I took a look a the set i posted in person because I wanted to see if they were 8.5 width, but ended up being 8", so I posted the link since I felt someone would benefit from the great price. Not to throw salt on any wounds from missing this offer, but she was selling them for $400 with descent tires.
However, if the set you posted, was for a better price I'm sure someone will snatch it.
05-08-2013, 11:36 PM
#7952
Safety Car
iTrader: (5)
thought locals might be interested in this...
so i found a place locally in SD that hydro dips and figured i would give them a shot. they just did my engine cover and i'll prob have them do all my engine bay covers. i really like how it came out. let me know if anyone is interested and i can pass along contact info
so i found a place locally in SD that hydro dips and figured i would give them a shot. they just did my engine cover and i'll prob have them do all my engine bay covers. i really like how it came out. let me know if anyone is interested and i can pass along contact info
05-10-2013, 10:53 PM
#7954
Suzuka Master
where they at?
The following users liked this post:
vivmike (05-11-2013)
05-10-2013, 11:46 PM
#7956
Suzuka Master
gotcha
05-12-2013, 09:12 PM
#7960
Suzuka Master
If you have to wonder why someone is excited to move to San Diego you have no business living here. But I want to know why too! haha