Category: Engine - Intake/Fuel
Price: $1
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): TL 3G
Location (State/Prov/Terr): OR
Item Condition: Used

Im selling two 3.2-3.5 3G Throttle Bodies. One has a MAP sensor. The Other does not.
TB W/Out MAP- $50
TB W/MAP - $60


Also have a P2R TB thermal Gasket & spacer, as well as an outlaw TB thermal gasket. I have the four bolts required to install both gaskets and spacer onto one TB.
P2R Gasket-$10
Outlaw Gasket-$20
P2R TB Spacer-$30
Buy all at once-$50


P2R IM spacer also for sale comes with bolts for install.
-$45


Also have 2 IMs for sale. One is from a 3.2, other from a 3.5.
Both come with the top plates, and butterfly valves as well.
The 3.2 IM is in perfect shape, very clean. But missing 2 bolts for the top plate.
The 3.5 IM works perfect. However, it is missing the 45 degree vacuum hos on the top (pictured). can either find a replacement tube, or tap the hole for a fitting. It also has a small crack above where the TB mounts (pictured). This doesn't effect the performance of the IM. But it can be clamped and JB welded for a easy fix. The top plate is missing all the bolts except the two nuts.
3.2 IM-$50
3.5 IM-$40
Also willing to sell just the 3.5 top plate.
-$30


06 TL knock sensor and wire. both in good working condition. Selling because I installed PnPd runners, so I just replace the sensor and wire while I was in there.
-$10


Set of Eibach springs with less than 5k miles on them. I upgraded to coilovers. (not pictured).
$125


Also have a set of 06 TL stock springs.(Not pictured)
-$50


Also have a stock crank pulley.
-$20

2007 Type S ECU w/ignition,bypass module, and switch blade key. This is a good setup if your going to run hondata on a 04-06 because you won't need to take it to Honda to get reprogrammed.
-$200


Buyer pays shipping and paypal fees on all items.
Text for quicker response. 541-598-5238

 

I am interested in both TB's.




Please PM me.


I am texting you right now.
Thanks,
Bobby

 

Im interested in the tb spacers and gaskets. As well the IM spacer and gasket

 

Ill take the p2r thermal tb gasket asap pm me your paypal info...thanks...

 

P2R TB gasket is sold
P2R IM spacer sold.
1 TB w/out MAP sensor sold

 

txt about 3.5 top plate

 

Can you text me pics of eibach springs? 973-204-4426

 

P2R TB gasket is sold
P2R IM spacer sold.
1 TB w/out MAP sensor sold
3.5 IM Top Cover Sold

 

BUMP

Outlwaw TB pending sale
2007 Type S ECU pending sale

 

Type S ECU SOLD.
Outlaw TB Gasket still for sale.

 

Outlaw TB gasket SOLD

 

Forgot to add in my post that I am looking to trade/ sell my PCDs. They are still on my car, but Im needing to get some High flow PCDs since my HOA is complaining about how loud my car is. They just the standard stainless steel. With about 5k miles on them. Will sell for $300 plus shipping or trade for HFPCDs, and ill throw some cash on top.
MODS please edit original post if possible.

 

3.2IM Top plate still for sale.
Please text me for a faster response

 

Ecu 6mt?

 

Bump
I am open to all fair offers on this stuff. I need it gone.

 

Are you wondering if Im selling my 2006 ECU? Yes it is for a M/T, and I might be willing to sell it.
Text me if interested.

 

BUMP
Still have a TB w/MAP sensor,
P2R Spacer.
3.2 IM W/ top plate
3.5 IM
Both sets of springs (Eibach and stock)
Knock sensor W/ Wire
Stock crank pulley

 

Are the p2r spacer For the throtle body of the 3.2?

 

Yes.

 

If the eibach springs are still available can you send pics? How much does it drop the car? Thanks

 

They drop the car a inch. Text me for pics 5415985238

 

bump

 

Is your 3.5 IM from a type s? And if not how does it compare to a 3.2 type s IM, performance wise? Will a 3.2 IM top plate fit the 3.5?

 

Yes it is from a type s. It is a lot lighter than the 3.2 manifold. It might flow a little better, but not really sure on that.
No the 3.2 top plate will not fit.
It also stays cooler than the 3.2 IM

 

Please close this thread. I will be creating a new updated one soon.
Thanks