Category: Exterior - Body Parts
Price: $1
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): TL 3G, TL 2G, TSX 2G, TSX 1G, Other Honda/Acura, Type-S Model
Location (State/Prov/Terr): DE
Item Condition: Used

I just purchased some new wheels and with my tiny apartment I have nowhere to store these wheels. They can come with these tires if you want them and only if you purchase before my wheels are installed. I will be removing the tires to get the TPMS out for my new wheels and will not be putting them back on unless you want them. The rims all have at least a little bit of curb rash on them.

Sorry for the wheels being dirty when pictured. I have been so busy I have not had time to clean them. I will clean them asap and take new pictures.
asking 700obo









These are the tires. Both rears were almost identical so I didn't picture both of them.
rear right


front







I got an extra front bumper when I got in my accident a little while back. The bumper is freshly painted WDP and matches the factory paint (of my car) better than the oem paint did. I already got a replacement and had it installed because the guy I went through took too long to get this one done.
asking 250 picked up. not willing to ship at this point unless you pay FULL shipping and take the risk of it getting damaged in shipment as I will only put insurance on it and you will have to deal with that.

I will get pictures of this posted asap. Can't seem to find them on my computer.


I have the matching front lip as well but it has a small rock chip in the front lip. It is brand new and never installed and will come with all hardware and instructions. I already got my replacement bumper with lip kit installed so I don't need this one.
asking 200 picked up. Like before I will ship but you will have to pay FULL shipping and I will not be responsible for damage. If you want insurance you must pay for that. I can have the rock chip fixed if needed for 20 extra.

 

I also forgot

I have the Project Kics 10mm front spacers and no name(without hubcentric rings) 15mm spacers for sale.

120obo for the project kics including all the lugs and 2 keys
40 for the no name

 

bump for a good seller and a good person! anyone who buys will not be disappointed

 

for everyone asking. I am in Claymont De right on the border of PA and literally right off of 95.

 

Have you gotten a chance to clean them up? I'd like to see them clean to get a better idea of how bad the curb rash is.

 

pmed!

 

I have not had time to clean them up just yet.

I just found out that my wheels I ordered are on backorder so now there is a little snag on this sale. I can't sell them till my wheels get here as I have nothing else to ride on.

 

Front lip is sold.

 

Wow amazing prices!

 

Yo, MuffinMan, very interested in your OEM wheels, are you willing to ship though? My zip code is 97045 (Oregon) if so. I don't need the tires, TPMS's, or anything other than the wheels and center caps, and shipping via USPS should be relatively inexpensive.

Please either call me or email me at the below numbers/addresses, other members can vouch (Frosty, JnC, AckTL05, etc.) I pay fast and don't bullshit, just looking for a straight deal. I'm going to assume, although it wasn't addressed in your post, that none of these wheels are bent and are straight+true, just have a little bit of curb rash which is no big deal, I'll refinish them myself.

Thanks man,

Chris Woodruff

cell: (971) 212-0166
email: christopher_wdrff@yahoo.com (PayPal is also the same handle)
email: ceedubb3000@me.com (Mac)
email: chrisw@bnj.com (Work)

 

I also don't care about the timing, so you having the set until your new wheels and tires come in is fine by me, I'm willing to pay in advance even to lock down the sale.

Thanks,

CW

 

pics of 10 mm spacer???

 

pix of the front bumper pls

 

I will get all of the pictures posted when I get back to work. Yes the wheels are all straight with no bends that I am aware off. There is just the curb rash from the previous owner.

 

Email sent

 

I need the rims asap!

tay_fu@yahoo.com

817-721-1308


thanks

 

still no pics of spacers? do they have pressed studs? whats the hub bore? thanks

 

Can I get a price shipped to 14305 Niagara Falls NY?

 

What do you want shipped to NY?

Sorry guys. I havent had time to get any pictures because I haven't had the time to pull the wheels.

These are the front spacers that I have.

http://i2.frsimg.com/images/detailed...476653e792.jpg

 

These are basically what the rear ones are.

http://www.ebay.com/itm/2-Billet-Wheel-Adapters-5x5-to-5x4-5-15mm-5x127-to-5x114-3-Spacers-5-Lug-/160891228849?pt=Motors_Car_Truck_Parts_Accessories&hash=item2575dd52b1&vxp=mtr

 

so its not the 10mm project kics from your signature? sorry about the questions man

 

Yes the front ones are 10mm project kics

The rear are no name 15mm

 

The wheels and tired sorry

 

Here are the pics of the ACTUAL spacers, Removed and ready to ship.


Project Kics 10mm spacers






15mm spacers

 

From the looks of those pictures and looking back at the 15mm spacers I don't think I will be selling them. If you want to risk it just pay for shipping and you can have them.

*on second thought I don't even want that on my conscience so I am throwing them away. If there is someone that just needs ONE spacer let me know asap.

 

Pm'd

 

Rims still for sale? and are you willing to ship if they are?

 

interested in rims as well, local pickup with cash...

 

Sorry everything in this thread is sold