07 TL Type S OEM Exhaust and Suspension!
09-01-2009, 02:05 PM
#1
Acura Cert MASTER TECH
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Amish Country PA
Age: 41
Posts: 314
Likes: 0
Received 11 Likes
on
5 Posts
07 TL Type S OEM Exhaust and Suspension!
Up for sale is my OEM Type S exhaust off my TL, and the OEM Type S suspension (manual trans). Reason for selling is I put a full ATLP exhaust on my car back in January, and the Acura A-Spec suspension on in the Spring. Exhaust has about 30k miles on it, suspension has about 35k miles on it.
I only have a pic of the suspension at this time, sorry no pics of the exhaust (it's in storage at work).
Suspension is in the original boxes that my A-Spec suspension came in, including the packaging material, so that's how it will be shipped. As noted above, this is off of a manual trans 07 TL Type S. The only reason I'm noting that is that some people on here have mentioned that the spring rates on the MT springs are less then the AT springs, (due to weight difference of the trans), and therefore putting MT suspension on an AT car lowers it just a slight bit more...? I'm not claiming this is true, I'm just throwing it out there
Regardless, it's off the S so it's stiffer, and if I do remember correctly, it does sit lower then the base, though don't quote me on that! Price is $200 plus shipping. Pick up is available.
The exhaust is about a 9/10, no damage, just a little dirty, I need to clean it up! I WILL NOT SHIP, at this point at least. Even if I choose to later, it's going to be pricey for the buyer. That said, exhaust is going for $500 not shipped. Let me be clear this is just for the catback section!
I also have the J pipe and 3rd cat. J pipe is $50 plus shipping (and I think there's a small, 1" scuff mark on the bottom of the pipe from a slight bottom out I had). Pretty sure it didn't actually dent or crease the pipe itself. 3rd cat is $150 plus shipping.
Any questions, feel free to email me, PM me, reply on here, etc! Since I don't sell on here often (though I did sell my Integra through here), you can feel free to check out my eBay ID, which is kjw239. Ignore the profile, it's very outdated, I need to change it!
I only have a pic of the suspension at this time, sorry no pics of the exhaust (it's in storage at work).
Suspension is in the original boxes that my A-Spec suspension came in, including the packaging material, so that's how it will be shipped. As noted above, this is off of a manual trans 07 TL Type S. The only reason I'm noting that is that some people on here have mentioned that the spring rates on the MT springs are less then the AT springs, (due to weight difference of the trans), and therefore putting MT suspension on an AT car lowers it just a slight bit more...? I'm not claiming this is true, I'm just throwing it out there
Regardless, it's off the S so it's stiffer, and if I do remember correctly, it does sit lower then the base, though don't quote me on that! Price is $200 plus shipping. Pick up is available.The exhaust is about a 9/10, no damage, just a little dirty, I need to clean it up! I WILL NOT SHIP, at this point at least. Even if I choose to later, it's going to be pricey for the buyer. That said, exhaust is going for $500 not shipped. Let me be clear this is just for the catback section!
I also have the J pipe and 3rd cat. J pipe is $50 plus shipping (and I think there's a small, 1" scuff mark on the bottom of the pipe from a slight bottom out I had). Pretty sure it didn't actually dent or crease the pipe itself. 3rd cat is $150 plus shipping.
Any questions, feel free to email me, PM me, reply on here, etc! Since I don't sell on here often (though I did sell my Integra through here), you can feel free to check out my eBay ID, which is kjw239. Ignore the profile, it's very outdated, I need to change it!
09-01-2009, 10:08 PM
#3
Acura Cert MASTER TECH
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Amish Country PA
Age: 41
Posts: 314
Likes: 0
Received 11 Likes
on
5 Posts
I'de be happy to try and get some pics for you, can't say it will be for sure tomorrow, but I'll def get them ASAP for you. I'de love for a local person to buy them, it'll save so much hassle! Thanks for your interest!
09-02-2009, 06:31 PM
#5
Acura Cert MASTER TECH
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Amish Country PA
Age: 41
Posts: 314
Likes: 0
Received 11 Likes
on
5 Posts
Six Sigma BB -
Wasn't able to get any pics today, sorry
If you are local, I invite you to stop by, you can see the exhaust in person, and look it over. If this interests you, PM me and I'll give you my cell #. It'd probably be easier to talk about it like that anyway.
CMCx2009 -
PM sent.
And all other PMs replied too.
Still would prefer not to ship, but if someones got money, we'll see!
-- Kevin
Wasn't able to get any pics today, sorry
If you are local, I invite you to stop by, you can see the exhaust in person, and look it over. If this interests you, PM me and I'll give you my cell #. It'd probably be easier to talk about it like that anyway.CMCx2009 -
PM sent.
And all other PMs replied too.
Still would prefer not to ship, but if someones got money, we'll see!
-- Kevin
09-03-2009, 05:32 AM
#7
Acura Cert MASTER TECH
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Amish Country PA
Age: 41
Posts: 314
Likes: 0
Received 11 Likes
on
5 Posts
I'm on the Southern end, I can be in Philly in under an hour an a half, easy. Less time if you go when there's not a lot of traffic. Easiest route is 95 to 1, puts you within about 10 miles of my place. If you're interested, PM me, I'll give you my cell. Thanks!
-- Kevin
-- Kevin
Trending Topics
09-07-2009, 10:04 AM
#10
Acura Cert MASTER TECH
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Amish Country PA
Age: 41
Posts: 314
Likes: 0
Received 11 Likes
on
5 Posts
Finally had time to upload the pics of the exhaust! Tried to clean it up a little real quickly before I took the pics, didn't have a lot of free time Friday!
09-07-2009, 05:21 PM
#13
Acura Cert MASTER TECH
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Amish Country PA
Age: 41
Posts: 314
Likes: 0
Received 11 Likes
on
5 Posts
I'm under the impression that yes, they could be seperated (cut off) and then rewelded. I would think that one would just be able to be bolted right up, and then the other one would just need to be cut and welded. Might want to check with a local exhaust shop and/or someone you know that's familiar with welding!
-- Kevin
-- Kevin
09-10-2009, 07:13 PM
#14
Acura Cert MASTER TECH
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Amish Country PA
Age: 41
Posts: 314
Likes: 0
Received 11 Likes
on
5 Posts
Still replying to the PMs and emails Have a local person coming this weekend to look at, but still thinking of accepting offers on shipping if the buyer is willing to pay for it!
Have a local person coming this weekend to look at, but still thinking of accepting offers on shipping if the buyer is willing to pay for it!
09-11-2009, 08:37 AM
#15
Veeeee Tec
I'm on the Southern end, I can be in Philly in under an hour an a half, easy. Less time if you go when there's not a lot of traffic. Easiest route is 95 to 1, puts you within about 10 miles of my place. If you're interested, PM me, I'll give you my cell. Thanks!
-- Kevin
-- Kevin
Hey man. Iam intrested in both and local.
call me 410 807 5870
09-17-2009, 08:44 PM
#19
Acura Cert MASTER TECH
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Amish Country PA
Age: 41
Posts: 314
Likes: 0
Received 11 Likes
on
5 Posts
ACE - replied to your PM
CMC - I still have too much local interest, as well as non local interest. So at this point, while I appreciate your offer, I will have to decline, as I'm still confident I can get what I'm asking for. That, and as originally stated, I'm in no rush to sell any of this, seeing as the exhaust has just been sitting around since January anyway! But I will def keep you in mind, should the time come for me to decide to finally just let it go. Thanks again for your interest!
-- Kevin
CMC - I still have too much local interest, as well as non local interest. So at this point, while I appreciate your offer, I will have to decline, as I'm still confident I can get what I'm asking for. That, and as originally stated, I'm in no rush to sell any of this, seeing as the exhaust has just been sitting around since January anyway! But I will def keep you in mind, should the time come for me to decide to finally just let it go. Thanks again for your interest!
-- Kevin
09-19-2009, 12:38 PM
#21
Veeeee Tec
09-19-2009, 01:15 PM
#22
09-19-2009, 04:56 PM
#23
Veeeee Tec
09-20-2009, 09:39 PM
#25
Acura Cert MASTER TECH
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Amish Country PA
Age: 41
Posts: 314
Likes: 0
Received 11 Likes
on
5 Posts
I'll give you both a call tomorrow (Monday), sorry I didn't have a chance to today. Was super busy! But I'll def be in contact with you all tomorrow
09-30-2009, 05:43 AM
#28
10-18-2009, 11:07 AM
#36
Acura Cert MASTER TECH
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Amish Country PA
Age: 41
Posts: 314
Likes: 0
Received 11 Likes
on
5 Posts
Wow, sorry guys, I haven't been on here in almost a week!
jdmintegra00 - I PMed you back with my phone number, give me a call, we'll set something up.
gkr-718 - Def didn't forget about you! Still have your number saved in my phone. If the above deals fall through, and I choose to cut the mufflers off, I'll call you ASAP and we'll set something up.
I'll keep everyone posted. Sorry again I didn't get back to everyone more quickly!
jdmintegra00 - I PMed you back with my phone number, give me a call, we'll set something up.
gkr-718 - Def didn't forget about you! Still have your number saved in my phone. If the above deals fall through, and I choose to cut the mufflers off, I'll call you ASAP and we'll set something up.
I'll keep everyone posted. Sorry again I didn't get back to everyone more quickly!
10-18-2009, 02:57 PM
#37
Veeeee Tec
Wow, sorry guys, I haven't been on here in almost a week!
jdmintegra00 - I PMed you back with my phone number, give me a call, we'll set something up.
gkr-718 - Def didn't forget about you! Still have your number saved in my phone. If the above deals fall through, and I choose to cut the mufflers off, I'll call you ASAP and we'll set something up.
I'll keep everyone posted. Sorry again I didn't get back to everyone more quickly!
jdmintegra00 - I PMed you back with my phone number, give me a call, we'll set something up.
gkr-718 - Def didn't forget about you! Still have your number saved in my phone. If the above deals fall through, and I choose to cut the mufflers off, I'll call you ASAP and we'll set something up.
I'll keep everyone posted. Sorry again I didn't get back to everyone more quickly!
10-18-2009, 11:44 PM
#38
Advanced
Join Date: Nov 2008
Location: bx
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Wow, sorry guys, I haven't been on here in almost a week!
jdmintegra00 - I PMed you back with my phone number, give me a call, we'll set something up.
gkr-718 - Def didn't forget about you! Still have your number saved in my phone. If the above deals fall through, and I choose to cut the mufflers off, I'll call you ASAP and we'll set something up.
I'll keep everyone posted. Sorry again I didn't get back to everyone more quickly!
jdmintegra00 - I PMed you back with my phone number, give me a call, we'll set something up.
gkr-718 - Def didn't forget about you! Still have your number saved in my phone. If the above deals fall through, and I choose to cut the mufflers off, I'll call you ASAP and we'll set something up.
I'll keep everyone posted. Sorry again I didn't get back to everyone more quickly!
ok cool
10-23-2009, 06:34 PM
#39
Acura Cert MASTER TECH
Thread Starter
iTrader: (2)
Join Date: Apr 2006
Location: Amish Country PA
Age: 41
Posts: 314
Likes: 0
Received 11 Likes
on
5 Posts
Well I keep getting people who are interested, and I PM or call/text them, we talk, and then they just fall off the face of the earth and never get back to me after a day or two! Oh well.
We'll add an incentive. Local deal/pick up gets the exhaust for cheaper, but don't make offers in this thread, rather PM please. Don't want this to turn into some type of auction or bidding war. Though that would be kind of cool
Let's see what happens this weekend!
We'll add an incentive. Local deal/pick up gets the exhaust for cheaper, but don't make offers in this thread, rather PM please. Don't want this to turn into some type of auction or bidding war. Though that would be kind of cool
Let's see what happens this weekend!