25mm spacers, GeForce 9600GT, HID 5000K 9006, Wacom Bamboo Fun!!!
Thread Starter
Down for a photoshoot?
iTrader: (4)
Joined: Nov 2006
Posts: 1,605
Likes: 9
From: Los Angeles, CA
Hi everyone,
I have an assortment of things I would like to get out of my possession as they have been sitting in my room collecting dust as I have been too busy to sell them earlier
Items are as described below:
(1) 25mm wheel spacers, 5x114.3 - I was going to use these for my rears, but I decided against it as I think they will be a bit too aggressive for LA highways
... anyways, I purchased these for $90 on ebay and only took them out to take pictures. They have the studs integrated into the spacers themselves and also include the lugs as shown in the picture below. $70 shipped!!!


(2) 9006 HIDs in 5000K output. These were purchased from a vendor on AZ with hopes of using them for the Accord fogs that I was hoping to install, but I've decided to skip out as they seem like too much of a hassle for me to even bother haha. I have only test fitted them onto my fog connections to see that they are in working order and have placed them back into the original box. They are originally $60 shipped, so I would like $55 shipped (pretty much BNIB):

(3) GeForce 9600GT. I purchase this high-end graphics card from Dell, but I recently found a rare deal for a HD4850 instead so this is up for sale. I recently received the GeForce in the mail from Dell, and I have not opened the package at all so it is BNIB. I will also include a PC game, Stalker that came with my HD4850 as well. If you check Tom's hardware, the 9600GT is an extremely high-end gaming/multimedia graphics card: http://www.tomshardware.com/reviews/...ce,2323-6.html
$65 shipped!


And finally,
(4) Wacom Bamboo Fun, pen tablet for graphics work, etc. I purchased this new about a month ago, opened it up and tried it out once on my laptop thinking I would be using this for future photo-editing, graphics work, etc. However, I found that I prefer my mouse over the tablet so away it goes
The tablet is $100 brand new, so I will let it go for $80 shipped. The Bamboo is made by one of the more respectable companies in tablet technology and design, and most graphic designers/artists would agree that the Bamboo fun is a good amateur model.


Please feel free to PM me if you have questions, etc.
Pretty much all of these items are brand new (minus the test run for the HIDs and Bamboo) for less than the original prices, so please take them off of my hands! Thanks again!
I have an assortment of things I would like to get out of my possession as they have been sitting in my room collecting dust as I have been too busy to sell them earlier
Items are as described below:(1) 25mm wheel spacers, 5x114.3 - I was going to use these for my rears, but I decided against it as I think they will be a bit too aggressive for LA highways
... anyways, I purchased these for $90 on ebay and only took them out to take pictures. They have the studs integrated into the spacers themselves and also include the lugs as shown in the picture below. $70 shipped!!!

(2) 9006 HIDs in 5000K output. These were purchased from a vendor on AZ with hopes of using them for the Accord fogs that I was hoping to install, but I've decided to skip out as they seem like too much of a hassle for me to even bother haha. I have only test fitted them onto my fog connections to see that they are in working order and have placed them back into the original box. They are originally $60 shipped, so I would like $55 shipped (pretty much BNIB):

(3) GeForce 9600GT. I purchase this high-end graphics card from Dell, but I recently found a rare deal for a HD4850 instead so this is up for sale. I recently received the GeForce in the mail from Dell, and I have not opened the package at all so it is BNIB. I will also include a PC game, Stalker that came with my HD4850 as well. If you check Tom's hardware, the 9600GT is an extremely high-end gaming/multimedia graphics card: http://www.tomshardware.com/reviews/...ce,2323-6.html
$65 shipped!


And finally,
(4) Wacom Bamboo Fun, pen tablet for graphics work, etc. I purchased this new about a month ago, opened it up and tried it out once on my laptop thinking I would be using this for future photo-editing, graphics work, etc. However, I found that I prefer my mouse over the tablet so away it goes
The tablet is $100 brand new, so I will let it go for $80 shipped. The Bamboo is made by one of the more respectable companies in tablet technology and design, and most graphic designers/artists would agree that the Bamboo fun is a good amateur model. 

Please feel free to PM me if you have questions, etc.
Pretty much all of these items are brand new (minus the test run for the HIDs and Bamboo) for less than the original prices, so please take them off of my hands! Thanks again!
Last edited by crzygosu87; Jun 23, 2009 at 12:00 AM.
Thread Starter
Down for a photoshoot?
iTrader: (4)
Joined: Nov 2006
Posts: 1,605
Likes: 9
From: Los Angeles, CA
I am pretty firm on the prices above ... been lowered quite a lot already sorry!
Memory clock rate: 2000 MHz
GPU core clock rate: 675 MHz
(http://www.tigerdirect.com/applicati...IN#detailspecs)
And yes, dual DVI connectors
Memory clock rate: 2000 MHz
GPU core clock rate: 675 MHz
(http://www.tigerdirect.com/applicati...IN#detailspecs)
And yes, dual DVI connectors
Thread Starter
Down for a photoshoot?
iTrader: (4)
Joined: Nov 2006
Posts: 1,605
Likes: 9
From: Los Angeles, CA
UPDATED TO-SELL-RIGHT-AWAY Prices
:
Spacer - $50 shipped!!! SOLD!
HID - $40 shipped!!! SOLD!
GeForce - $40 shipped!!! SOLD!
Bamboo - $70 shipped!!!
Only Wacom Bamboo Fun left! This is a great tool to have if you're into graphic design/photoshopping!
:Spacer - $50 shipped!!! SOLD!
HID - $40 shipped!!! SOLD!
GeForce - $40 shipped!!! SOLD!
Bamboo - $70 shipped!!!
Only Wacom Bamboo Fun left! This is a great tool to have if you're into graphic design/photoshopping!
hey email me at P98supra@yahoo.com I am interested in the spacers, but cannot PM yet because I am a new member.
I just picked up a 09 tsx and if the spacers will work on them, i will take them
I just picked up a 09 tsx and if the spacers will work on them, i will take them
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
Jul 16, 2017 07:33 AM
Sarlacc
Console & Computer Gaming
5
Sep 30, 2015 02:15 PM
AcuraKidd
Non-Automotive & Motorcycle Sales
0
Sep 25, 2015 11:18 PM



