SOLD! Comptech Supercharger kit/headers/UR Pulley
Thread Starter
myspace.com/trancesponder
iTrader: (1)
Joined: Feb 2005
Posts: 75
Likes: 0
From: Tampa, FL
SOLD! Comptech Supercharger kit/headers/UR Pulley
Whats up everyone. Unfortunately for me, the time has come to sell the charger. I just removed it this week. The sale includes the following:
Comptech Supercharger kit with High Boost Pulley 01-03 CLs
Comptech Headers (Thermo-coated gray to hold in the heat)
UR Lightened Crank Pulley (Made for superchargers only)
Autometer gauges (Boost and Air/fuel) Silver
Gauge Pod (Gray)
The only things missing on the kit is the battery tie down, the bracket that moves the power steering resevoir, and a bracket that holds the icebox air filter system (I ended up making my own cold air intake).
Everything else is there to make the kit work (charger,hoses,hardware,ESM, fuel pressure regulator, intank fuel pump, fan shroud, etc) You'll have to buy a battery as well (smaller battery).
The kit has about 50k miles on it (90% highway) and runs great. I have both regular and high boost pulley. The headers has a scrap on the bottom collector, but not bad enough to affect performance. Its hard to tell what the performance gains are. I would have to say 90-100hp gains with the high boost pulley (and headers and crank pulley of course).
Asking $2,800 obo. I prefer not to ship, but I will if needed.
Email me @ djtrancesponder@verizon.net. Thanks!!

Comptech Supercharger kit with High Boost Pulley 01-03 CLs
Comptech Headers (Thermo-coated gray to hold in the heat)
UR Lightened Crank Pulley (Made for superchargers only)
Autometer gauges (Boost and Air/fuel) Silver
Gauge Pod (Gray)
The only things missing on the kit is the battery tie down, the bracket that moves the power steering resevoir, and a bracket that holds the icebox air filter system (I ended up making my own cold air intake).
Everything else is there to make the kit work (charger,hoses,hardware,ESM, fuel pressure regulator, intank fuel pump, fan shroud, etc) You'll have to buy a battery as well (smaller battery).
The kit has about 50k miles on it (90% highway) and runs great. I have both regular and high boost pulley. The headers has a scrap on the bottom collector, but not bad enough to affect performance. Its hard to tell what the performance gains are. I would have to say 90-100hp gains with the high boost pulley (and headers and crank pulley of course).
Asking $2,800 obo. I prefer not to ship, but I will if needed.
Email me @ djtrancesponder@verizon.net. Thanks!!

Thread Starter
myspace.com/trancesponder
iTrader: (1)
Joined: Feb 2005
Posts: 75
Likes: 0
From: Tampa, FL
Trending Topics
Thread Starter
myspace.com/trancesponder
iTrader: (1)
Joined: Feb 2005
Posts: 75
Likes: 0
From: Tampa, FL
Thanks Ron!!
Thread Starter
myspace.com/trancesponder
iTrader: (1)
Joined: Feb 2005
Posts: 75
Likes: 0
From: Tampa, FL
Thread Starter
myspace.com/trancesponder
iTrader: (1)
Joined: Feb 2005
Posts: 75
Likes: 0
From: Tampa, FL
Thread Starter
myspace.com/trancesponder
iTrader: (1)
Joined: Feb 2005
Posts: 75
Likes: 0
From: Tampa, FL
Hey everyone. Sorry I havent been able to respond to some of the comments. So far, I have potential buyers for each item. If they fall through, I will send Pm's out or just post a reply here.
Comptech Supercharger Kit - $2,300.00 (Not including shipping)
Comptech Headers (Thermocoated) $400.00 (Not inlcuding shipping)
UR Crank Pulley & Belt (Silver) - $100.00 (Not including shipping)
Comptech Supercharger Kit - $2,300.00 (Not including shipping)
Comptech Headers (Thermocoated) $400.00 (Not inlcuding shipping)
UR Crank Pulley & Belt (Silver) - $100.00 (Not including shipping)
Thread Starter
myspace.com/trancesponder
iTrader: (1)
Joined: Feb 2005
Posts: 75
Likes: 0
From: Tampa, FL
its not that bad. it took me a full day to install. i have a printout from comptech of the installation instructions. the only thing that held me up was removing the pulley from the alternator. i didnt have an impact gun, so i had to take it to a shop.

