bkrupp

Category: Engine - Intake/Fuel
Price: $100
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): CL 2G
Location (State/Prov/Terr): CA
Item Condition: Used

I am looking for an elbow from the Comptech / CT Engineering Supercharger kit.

Hopefully someone has one laying around or something.

Prefer it to be for a 2003 CL Type-S, but might be able to work with any.

It would save me the hassle of having to make my own.

Thanks everyone.

Karanx7

iTrader: (2)

Which elbow? The one to connect the TB to the VSA, or the elbow to connect the SC Outlet to the IM?

bkrupp

So I believe I am missing the one from the IceBox to the SC inlet.

It should be plastic, with one side of the elbow slightly longer than the other.

Thanks for reading, hopefully someone has info on one.

Karanx7

iTrader: (2)

Do you have an automatic or a manual? I have one, but I'm using it on my car. I can send you a picture of it, and you should be able make or buy your own. It's a pretty generic plastic elbow.

bkrupp

I've got the 6spd manual.

yeah if you can send pictures, I may even be able to make one from the parts I got with the kit I have, just need to know or see the differences if possible.

Thank you.

For anyone else out there, keep looking in those storage bins if you have one sitting around.

Karanx7

iTrader: (2)

Here's the only picture I have off hand. There's 2 elbows for the manual transmission. I put arrows on the picture for each. Do you need the Yellow one or the Red one?

bkrupp

Yellow One.

The red one I have I believe that is included with any Ice Box kit. It shouldn't have any hose attachments, but the yellow one does.


Edit: Thanks for the high res picture. Definitely helps with seeing how everything is laid out and how it should look when finished.

bkrupp

Just a bump to see if anyone has something sitting around their garage/house, or any info.

If anyone has info or an elbow price is definitely not too much of a concern.

Karanx7

iTrader: (2)

Here's some basic pictures of it. I put caps on the ports because I bypassed the EGR, IAB, and EVAP.

bkrupp

Thank you so much. You are awesome.

Damn California Air Resources Board. Have to have all the stuff intact that you deleted.

bkrupp

bump, maybe someone has an extra that hasn't been around in awhile, or someone wants to get rid of one.

2N10s

i might have one laying around.... haven't been on this forum for years but in need of some help but let me check what i have... i won't get to check it as it's at a shop on the other side of town. if i catch a break from work one day i'll have a look but no promises as i've very busy these days. Feel free to email me at fern_lau@hotmail.com

Accord_V6_400m

iTrader: (1)

Got a spare one laying around found it in my storage and took it with me so I got it in my car. I think it is for the J30 kit so a bit smaller but nothing horrible.Hit me up if you want it.

edit: Have the aluminum elbow that goes to the IM. I say go with a custom intake if you only need that plastic piece. It makes the supercharger sound louder anyway.

bkrupp

Email sent. hope you get it.

bkrupp

I think I have all the AL elbows required. Just the plastic one going from the AL supercharger to the icebox one, just the same one posted earlier in this thread.

If you think you have one, accord or CL, I'll probably take it if the price and all is right.

I can't do a custom intake because of CARB, so I am just trying to find the one piece to connect the SC to the Icebox.

Accord_V6_400m

iTrader: (1)

your still interested in the aluminum elbow or only of the plastic ones if I find it? Honestly they might just think it's a part of the Carb legal SC kit if you make a custom intake that looks half way decent.

did you try calling the guys at CT-Engineering? We're they any help or is the kit pretty much discontinued?

bkrupp

Really just the plastic elbow. I will make one if I can't find one before everything else is ready.

No idea what CT-E will say. I don't have a direct line and need to reply to Nate's email, but I don't have a parts list to make it worth while yet. (job is busy and such)

bkrupp

bump for anyone that may be lurking and have this part

bkrupp

bump because CT-E hasn't gotten back to me about the part yet.

Ron A

Reposted in Marketplace.