thisaznboi88

iTrader: (7)

Category: Engine - Power Adders
Price: $500
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): RL 2G, TL 3G
Location (State/Prov/Terr): CA
Item Condition: Used

Selling my used port and polished 08 tls cylinder heads. They were on my Turbo accord for about 20k. The cylinder heads are gasket matched on the intake side. They have 5 angle valve jobs on the intake side and 3 angle on the exhaust. Valves were back cut with 2 angles. They need to be hot tanked and decked before you can install them. They have already milled milled once. Took off .011 inches. Also the valves on cylinder 5 and 6 need to be ultra sonic cleaned or you can use a wire wheel. They have build up either from bad gas or coolant poisoning and have a white residue on the face.

They flow 315cfm intake and 205 exhaust. @.050 lift. Perfect if you want to use stages camshaft or boost the car. Let me know if you are interested. Looking for 500 pick up in merced, CA or 500 + cost of shipping.

thisaznboi88

iTrader: (7)

Tried to clean them out. For sure they need to be hot tanked

thisaznboi88

iTrader: (7)

575 + Shipping.

These heads were 1200 when I got them done

thisaznboi88

iTrader: (7)

Bump

thisaznboi88

iTrader: (7)

Bump 500 pick up in merced, CA or 500 + cost of shipping. Will not go any lower. You are getting the heads for less than 1/2 of what I paid just in labor to do the porting and polish and flow bench. not counting the cost of the heads.

bottom dollar price non-negotiable.




mod edit-updated

thisaznboi88

iTrader: (7)

Updated pictures of the cylinder before the carbon build up

valve were back cut with 2 different angles.

thisaznboi88

iTrader: (7)

Sold!