New to the TL World. Slow build
The following users liked this post:
rockstar143 (12-21-2017)
#43
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Admirable job though...even stock, it looks great.
I agree, but it's fun to go back and see the progress and changes.
My old TL thread was a lot of bullshit but the pics made it interesting.
Plus, we're millennials...we need entertain and words are hard.
I agree, but it's fun to go back and see the progress and changes.
My old TL thread was a lot of bullshit but the pics made it interesting.
Plus, we're millennials...we need entertain and words are hard.
#44
Burning Brakes
Thread Starter
Hahahaha!! "Words are hard." Lol.
True. I'll be sure to post more pics tho. I'll keep this updated more often. Especially with me trying to decide on the coilovers I want to go with.This car, I want to do the "One and done" thing. Not going thru 4 different suspension set ups or selling every set of wheels I get. I would like to keep at least 2 or 3 sets of wheels. The OEM ones(for winter), a nice set for DD status and then some for meets and POSSIBLY shows. Lol. But that's only in a perfect world.
The following users liked this post:
rockstar143 (12-23-2017)
#45
Burning Brakes
Thread Starter
I'm actually looking at getting these from a friend next month. Racing Hart J8 Pros I think. 19x9s. I'm thinking I'm going to like them. Just need to have them stripped down. Not sure if I want to polish the lip and paint the spokes or just paint them a solid gunmetal color.
#47
Burning Brakes
Thread Starter
Thanks man. I had my TSX and enjoyed it. Especially the fitment I had with the Varrstoen wheels. But too many issues. With it being an 04, they had most of the problems. I vowed to never by the first year of anything again. Was gonna take me like $4k to get it where I wanted it. Axles, new suspension set up, Navi screen replacement, and a few other things. Then the trans and clutch went bad. When I spent $2600-3k on the trans, clutch kit, clutch master and slave cylinder, and shift cables, I was done with it. I sold it for $2800 and got my TL. Lol.
Decided to go with Tein Street Advance Z next month. Then in February, I'll be getting the EDFC controller for it.
#48
Thanks man. I had my TSX and enjoyed it. Especially the fitment I had with the Varrstoen wheels. But too many issues. With it being an 04, they had most of the problems. I vowed to never by the first year of anything again. Was gonna take me like $4k to get it where I wanted it. Axles, new suspension set up, Navi screen replacement, and a few other things. Then the trans and clutch went bad. When I spent $2600-3k on the trans, clutch kit, clutch master and slave cylinder, and shift cables, I was done with it. I sold it for $2800 and got my TL. Lol.
Decided to go with Tein Street Advance Z next month. Then in February, I'll be getting the EDFC controller for it.
Decided to go with Tein Street Advance Z next month. Then in February, I'll be getting the EDFC controller for it.
The following users liked this post:
Shadow2056 (12-23-2017)
#49
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Dude, I actually kinda like the patina on those...LMAO...looks almost intentional...just matte clear over it.
seriously, I LOVE picking powder colors on prismatic...much like a house wall though, they ALWAYS look darker on the car...
the pics they post are full sun or angled up which the wheels NEVER are once mounted.
I like contrast...looking like CE28s a bit...but probably older so these the real OG's...
and IMO...if you want a smooth ride, just stick with Tein....had them on my TL's for a combined 80K miles with zero issues and I was maxed out.
I'm not cambergang hellflush kindahomosexual though...I was just regular zero camber flush with fender gang. (it was a gang but we didn't beat anyone up).
seriously, I LOVE picking powder colors on prismatic...much like a house wall though, they ALWAYS look darker on the car...
the pics they post are full sun or angled up which the wheels NEVER are once mounted.
I like contrast...looking like CE28s a bit...but probably older so these the real OG's...
and IMO...if you want a smooth ride, just stick with Tein....had them on my TL's for a combined 80K miles with zero issues and I was maxed out.
I'm not cambergang hellflush kindahomosexual though...I was just regular zero camber flush with fender gang. (it was a gang but we didn't beat anyone up).
The following users liked this post:
Shadow2056 (12-23-2017)
#50
Burning Brakes
Thread Starter
True indeed. The TSX could have made some power. But I'd have to spend at LEAST $3k. That doesn't include a new clutch kit to handle the extra power(another $400+install). With the TL I can have the power I want for less. J pipe, mufflers, and intake and I'll be happy performance wise....for now. Lol.
The following users liked this post:
Josh_TypeS (12-23-2017)
#51
Burning Brakes
Thread Starter
Dude, I actually kinda like the patina on those...LMAO...looks almost intentional...just matte clear over it.
seriously, I LOVE picking powder colors on prismatic...much like a house wall though, they ALWAYS look darker on the car...
the pics they post are full sun or angled up which the wheels NEVER are once mounted.
I like contrast...looking like CE28s a bit...but probably older so these the real OG's...
and IMO...if you want a smooth ride, just stick with Tein....had them on my TL's for a combined 80K miles with zero issues and I was maxed out.
I'm not cambergang hellflush kindahomosexual though...I was just regular zero camber flush with fender gang. (it was a gang but we didn't beat anyone up).
seriously, I LOVE picking powder colors on prismatic...much like a house wall though, they ALWAYS look darker on the car...
the pics they post are full sun or angled up which the wheels NEVER are once mounted.
I like contrast...looking like CE28s a bit...but probably older so these the real OG's...
and IMO...if you want a smooth ride, just stick with Tein....had them on my TL's for a combined 80K miles with zero issues and I was maxed out.
I'm not cambergang hellflush kindahomosexual though...I was just regular zero camber flush with fender gang. (it was a gang but we didn't beat anyone up).
Lol. I don't think that's the paint scheme. I think that was someone trying to peel the paint and it didn't work out too well. Lol. I'm going for a clean look on this car. No crazy patterns. Never been for that anyway. Hahaha.
The CE28s look good. I've always wanted a set of those. Never been at the front of my mind those. Work Meisters are the primary ones I want. If I can afford them. Lol.
I'm not much on the camber gang thing either. Lol. I just want the wheels flush with the fenders. I've never been for a massive negative camber thing. Tuck a little tire and I'm good. But I think I'll be going with the Tein Street Advance.
#52
Burning Brakes
Thread Starter
It's confirmed. Next month, gonna go with Tein Street Advance Z and the EDFC controller. Buying the coils next month. Getting the EDFC in February. Been wanting this set up FOREVER!! Figured since I was doing a one and done type thing, I'm gonna do it right the first tim around with the set up I want. Not just something to get me by.
Just waiting to order the parts. Trying to figure out if I should get the coils with the J pipe or the coils with the Injen CAI. Might do the J pipe since they gain more power than the CAi does. We'll see tho. OMG....Can't wait.
Also on the menu are brakes. Trying to decide if I should do the RL calipers with slotted rotors or should I just keep my current calipers and do slotted all around. Hmmm....Any suggestions?
#53
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
^^^ Great plan.
#54
Burning Brakes
Thread Starter
Only thing is...I'm starting to rethink installing the coils until I get the EDFC. I'd hate to have to go back and forth adjusting the dampening in the rear until I get the ride right. Lol. But I'll probably do it still.
Found these the other day. Gonna pick these up next month too. ESR SR04 18x10.5s. I know before I didn't want to do the whole "fitment" thing on this car but I was sure I was gonna end up doing it anyway. Lol. But I'll have two sets of wheels(if things work out like they should).
#55
Burning Brakes
Thread Starter
Aight. Scraped the Street Advance plans and going with the Flex Zs. slightly better adjustability and come with top hats already. Won't be installing them until I get the EDFC to go along with it. On the list:
-Tein Flex Z
-Tein EDFC
-Type S front lip
-dual tip mufflers
-eBay CAI
-RL Calipers with slotted rotors
-18x10.5 wheels. Might do different specs if some other wheels pop up
-Tein Flex Z
-Tein EDFC
-Type S front lip
-dual tip mufflers
-eBay CAI
-RL Calipers with slotted rotors
-18x10.5 wheels. Might do different specs if some other wheels pop up
#56
Aight. Scraped the Street Advance plans and going with the Flex Zs. slightly better adjustability and come with top hats already. Won't be installing them until I get the EDFC to go along with it. On the list:
-Tein Flex Z
-Tein EDFC
-Type S front lip
-dual tip mufflers
-eBay CAI
-RL Calipers with slotted rotors
-18x10.5 wheels. Might do different specs if some other wheels pop up
-Tein Flex Z
-Tein EDFC
-Type S front lip
-dual tip mufflers
-eBay CAI
-RL Calipers with slotted rotors
-18x10.5 wheels. Might do different specs if some other wheels pop up
#58
Burning Brakes
Thread Starter
Just got my Tein Flex Zs in. I might go ahead and get them put in this week on a day I have off. We'll see tho. Had to put the wheels and EDFC on hold for now tho. I'll pick the EDFC up possibly later this month or next month. Not sure how long the wheels I wanted will be around. Found some Aodhan Ds02 18x10.5 for $650...Ugh I hate I missed out on that deal. I might want to find another set tho. Looking at them more and more on other TLs, I'm not sure I would have liked them that much. On the TSX, sure. But on the TL....not so much. I still have a set of 19x9 Racing Hart wheels I'll be getting from a friend. Just trying to put the money together.
Just got the LED fog light bulbs in yesterday. Waiting to have a chance to put those in. CAI will be in next week. Might just take a day and install all three at one time.
#61
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
The following users liked this post:
Shadow2056 (01-18-2018)
The following users liked this post:
Shadow2056 (01-21-2018)
#66
Burning Brakes
Thread Starter
Exactly!
Love the avatar as well!
Good for you!
I'm doing this because I've always loved having decals on my quarter windows. Not gonna sticker it up like a lot of people do. But when a company treats me well, why not represent for them? Heeltoe is one of the vendors on this website if I'm not mistaken. Why wouldn't I want to rep their emblem?
Love the avatar as well!
Good for you!
I'm doing this because I've always loved having decals on my quarter windows. Not gonna sticker it up like a lot of people do. But when a company treats me well, why not represent for them? Heeltoe is one of the vendors on this website if I'm not mistaken. Why wouldn't I want to rep their emblem?
#67
Burning Brakes
Thread Starter
It's the small things that make a difference. Added Type S rear side markers. Now to get these daggon coilovers on....if I can get a day where I'm off and it isn't 35 degrees outside....stoopid winter....
#68
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Looks good-small, subtle changes make a big difference! Keep going.....
The following users liked this post:
Shadow2056 (03-13-2018)
#70
Burning Brakes
Thread Starter
Got trade for these. Don't know the brand. They're 18x8.5s. They're ok. Might end up trading these soon tho. Verdict is still out on if I want to keep these. I have Friday off, it's supposed to be 61 and clear. Finally the coils will go on!
#73
Burning Brakes
Thread Starter
Took the 18s off. I couldn't stand them anymore. Lol. The look didn't sit well with me. Found the wheels I'll be getting. I'll wait to get them before I say. For the time being, I got some 04-06 TL wheels from a friend of mine. His is the grey one. 6spd and just added his RV6 J-pipe, exhaust, and 3.7 IM. Sounds great too.
#74
You had nice wheels on car when You bought car... then traded for china crap and finished with base wheels which looks worst than first set which came with car.
You have so many plans but I dont see any progress other than plans. Good luck in future mods on so nice car.
You have so many plans but I dont see any progress other than plans. Good luck in future mods on so nice car.
#76
Burning Brakes
Thread Starter
No. Was supposed to be done this morning. I had everything ready. But the jack handle went missing -_- Didn't find it til it was too late. It's supposed to be warm again tomorrow morning so I'll get it done then.
Um...thanks?
I do have plans. The wheels was a rush thing for me and I should have thought that out better. Don't need to rub my face in it. I'm already beating myself up over it. These wheels I actually like. They only look bad because they aren't clean. These are actually in great shape. The person I got them from is very pciky about keeping his car clean. These have just been sitting in the shed for a while. I took one step backwards and that was thew wheels I just had. The next set I'll be keeping. Kind of hard to have progress when you have limited funds. Family comes first. Then mods.
I do have plans. The wheels was a rush thing for me and I should have thought that out better. Don't need to rub my face in it. I'm already beating myself up over it. These wheels I actually like. They only look bad because they aren't clean. These are actually in great shape. The person I got them from is very pciky about keeping his car clean. These have just been sitting in the shed for a while. I took one step backwards and that was thew wheels I just had. The next set I'll be keeping. Kind of hard to have progress when you have limited funds. Family comes first. Then mods.
#77
dont get me wrong , i was scrolling down , car looks nice and then I see those 18" whaaaat ? they were probably 2x heavier than stock
Family first, high five for that I wouldnt spend only money I have for car...car is only car
keep going !
Family first, high five for that I wouldnt spend only money I have for car...car is only car
keep going !
#78
Burning Brakes
Thread Starter
Looking to get some 18x9.5s next month if things work out right. Trying to decide between AVID.1 AV-32s or something with a lip like some Varrstoen ES1s or XXR 521s in 18x10s. Idk yet. Still trying to decide.
Ninja edit: Just found the XXR 531s. Haha. Think I might end up going with those.
Last edited by Shadow2056; 03-30-2018 at 12:41 PM.
#79
buy type-s wheels cheaper, You wont kill performance with bigger heavier wheels and in my opinion they look awsome the rest You could spend on family , plus tires will be cheaper too
#80
Burning Brakes
Thread Starter
All this stuff are items I'll be saving up for. Gonna start following my dad's advice. "If what you want to buy is $400, make sure you have $800 in the bank. If it cost $700, make sure you have $1400 in the bank. Always make sure you have double what you plan to spend in the bank." As long as I do that, I know I'll be aight when it comes to buying mods for the TL.