2011 MDX - How to Hardwire dashcam?

Thread Tools
 
Search this Thread
 
Old Nov 15, 2017 | 03:15 PM
  #1  
technocrat's Avatar
Thread Starter
Racer
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2014
Posts: 417
Likes: 62
From: GTA, Canada
Question 2011 MDX - How to Hardwire dashcam?

I searched but couldn't find any thread on MDX and didnt want to refer to threads from other vehicles. Please advice on following

- Which Fuse in the driver side fuse box can be used?
- Information on any fuse kit that you know or have used in MDX for same.

Thanks
Reply
Old Nov 15, 2017 | 04:41 PM
  #2  
Skirmich's Avatar
Moderator
 
Joined: Jan 2009
Posts: 6,509
Likes: 1,021
From: Baja, México.
You can use the +12V lead out of the auto dimming rear view mirror.. Is pretty easy, I hardwired a GoPro charger that I use for dashcam from time to time.
Reply
Old Nov 17, 2017 | 09:06 AM
  #3  
technocrat's Avatar
Thread Starter
Racer
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2014
Posts: 417
Likes: 62
From: GTA, Canada
I think that's already used by the Remote starter as that's where they have placed the antenna.
Reply
Old Nov 17, 2017 | 09:01 PM
  #4  
dzionny_dzionassi's Avatar
Burning Brakes
 
Joined: Jun 2010
Posts: 784
Likes: 119
From: willowbrook,il
What kind connection on your camera? if it is USB then it uses 5v not 12v
Reply
Old Nov 20, 2017 | 02:39 PM
  #5  
technocrat's Avatar
Thread Starter
Racer
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2014
Posts: 417
Likes: 62
From: GTA, Canada
Originally Posted by dzionny_dzionassi
What kind connection on your camera? if it is USB then it uses 5v not 12v
Its a micro USB, so a 5v, right? Which Fuse # in fuse box can i use?
Reply
Old Nov 22, 2017 | 09:38 PM
  #6  
dzionny_dzionassi's Avatar
Burning Brakes
 
Joined: Jun 2010
Posts: 784
Likes: 119
From: willowbrook,il
Originally Posted by technocrat
Its a micro USB, so a 5v, right? Which Fuse # in fuse box can i use?

Yes, you will need converter from 12v to 5v. I will check on fuse tomorrow.
Reply
Old Nov 22, 2017 | 10:01 PM
  #7  
Skirmich's Avatar
Moderator
 
Joined: Jan 2009
Posts: 6,509
Likes: 1,021
From: Baja, México.
Most of the car electric system runs 12V that is why I recommended the USB Charger (Car charger) as it works on 12v and steps down to 5V USB nominal. That is how my GoPRO is mounted but if its already used by the OP remote starter I dunno how much amperage it can take after that...
Reply
Old Nov 23, 2017 | 04:27 PM
  #8  
technocrat's Avatar
Thread Starter
Racer
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2014
Posts: 417
Likes: 62
From: GTA, Canada
Originally Posted by technocrat
Its a micro USB, so a 5v, right? Which Fuse # in fuse box can i use?
I rechecked its a mini USB

Originally Posted by dzionny_dzionassi
Yes, you will need converter from 12v to 5v. I will check on fuse tomorrow.
I am looking at this install kit which has the converter.

Amazon Amazon

See the Fusebox layout below, I see 23 & 33 not in use but no Amperage on them

Which other existing can I use? Also need to check where can I attach ground wire

2011 MDX - How to Hardwire dashcam?-fusebox.png
Reply
Old Nov 23, 2017 | 04:56 PM
  #9  
Skirmich's Avatar
Moderator
 
Joined: Jan 2009
Posts: 6,509
Likes: 1,021
From: Baja, México.
Use #9 Acc Socket or #3 Moonroof
Those are ON when the car is in Ignition and have a good amperage rating, But wont charge once the car is turned off.

If you want a constant voltage so it charges with the car off?
I believe #13 and #16 are always powered regardless of key position and they have excellent amperage rating.
Reply
Old Nov 23, 2017 | 10:40 PM
  #10  
dzionny_dzionassi's Avatar
Burning Brakes
 
Joined: Jun 2010
Posts: 784
Likes: 119
From: willowbrook,il

Originally Posted by technocrat
I rechecked its a mini USB



I am looking at this install kit which has the converter.

https://www.amazon.com/Spy-Tec-Hardw...ct_top?ie=UTF8

See the Fusebox layout below, I see 23 & 33 not in use but no Amperage on them

Which other existing can I use? Also need to check where can I attach ground wire

Attachment 92670
I used #32. camera turns on with turn of the key and it will not drain your battery when you are away from your vehicle.

Skirmich suggested to use moon roof slot, it will work to but i wanted to keep my camera on when ignition off and listening to music etc.

The kit you found on amazon should work with no problems.

Good luck

Last edited by dzionny_dzionassi; Nov 23, 2017 at 10:43 PM.
Reply
Old Nov 24, 2017 | 01:37 AM
  #11  
technocrat's Avatar
Thread Starter
Racer
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2014
Posts: 417
Likes: 62
From: GTA, Canada
Originally Posted by Skirmich
Use #9 Acc Socket or #3 Moonroof
Those are ON when the car is in Ignition and have a good amperage rating, But wont charge once the car is turned off.

If you want a constant voltage so it charges with the car off?
I believe #13 and #16 are always powered regardless of key position and they have excellent amperage rating.
Thanks, my dashcam is capacitor based but I prefer something with ignition, so will probably use #3


Originally Posted by dzionny_dzionassi


I used #32. camera turns on with turn of the key and it will not drain your battery when you are away from your vehicle.

Skirmich suggested to use moon roof slot, it will work to but i wanted to keep my camera on when ignition off and listening to music etc.

The kit you found on amazon should work with no problems.

Good luck
Thanks, Could you please let me know where did you put Ground wire?
Reply
Old Nov 27, 2017 | 11:45 AM
  #12  
technocrat's Avatar
Thread Starter
Racer
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2014
Posts: 417
Likes: 62
From: GTA, Canada
Hello, please advice on where can I ground the black wire
Reply
Old Nov 27, 2017 | 04:54 PM
  #13  
Skirmich's Avatar
Moderator
 
Joined: Jan 2009
Posts: 6,509
Likes: 1,021
From: Baja, México.
Look for a wire loom chassis wire.. The entire chassis is a big ground for EVERYTHING.
Reply
Old Nov 27, 2017 | 05:05 PM
  #14  
technocrat's Avatar
Thread Starter
Racer
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2014
Posts: 417
Likes: 62
From: GTA, Canada
Thanks but am confused now, I thought i would look for a screw/bolt where I can attach the ground cable. What do you mean by Wire Loom Chasis wire?
Reply
Old Nov 27, 2017 | 06:09 PM
  #15  
Skirmich's Avatar
Moderator
 
Joined: Jan 2009
Posts: 6,509
Likes: 1,021
From: Baja, México.
Yeah my bad.. Wire harness chassis ground..
Looks like a bolt that ties seceral grounds tigether, there are many below the dashboard. Example:

Reply
Old Nov 27, 2017 | 10:13 PM
  #16  
technocrat's Avatar
Thread Starter
Racer
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2014
Posts: 417
Likes: 62
From: GTA, Canada
Thanks, will hunt for one this weekend
Reply




All times are GMT -5. The time now is 08:28 AM.