AcuraZine - Acura Enthusiast Community

Turbo manifold plate

Thread Tools
 
Search this Thread
 
Old Jun 5, 2017 | 07:55 PM
Share
  #41  
779civic's Avatar
779civic
Thread Starter
Intermediate
 
Joined: Sep 2012
Posts: 34
Likes: 1
From: oklahoma
Originally Posted by Haré romel
Hi, they change torque converter with 3000rpm stall, this help alot 1/4 mile. you dont need load from begining.
who makes a stall converter for Honda/acura transmission?
Reply
0
Old Jun 5, 2017 | 07:59 PM
Share
  #42  
KenB350z's Avatar
KenB350z
Drifting
 
Joined: Feb 2012
Posts: 2,182
Likes: 285
From: Oklahoma City, Ok
Originally Posted by 779civic
who makes a stall converter for Honda/acura transmission?
I have one setting in my garage from level 10 with that stall. But, I'm waiting for my transmission to blow so I can rebuild and install the converter.
Reply
0
Old Jun 5, 2017 | 08:12 PM
Share
  #43  
Haré romel's Avatar
Haré romel
Advanced
 
Joined: Jul 2014
Posts: 77
Likes: 6
Originally Posted by KenB350z
What?!?! Man.... That's when my turbo spools (2500-3000rpm), would be in the 11's if I had that stall.
Exactly friend, i ll like want later, but for street is too much.
Reply
0
Old Jun 5, 2017 | 08:54 PM
Share
  #44  
KenB350z's Avatar
KenB350z
Drifting
 
Joined: Feb 2012
Posts: 2,182
Likes: 285
From: Oklahoma City, Ok
Well as soon as my transmission goes, im going to send it off and get both installed!
Reply
0
Old Jun 5, 2017 | 09:40 PM
Share
  #45  
Haré romel's Avatar
Haré romel
Advanced
 
Joined: Jul 2014
Posts: 77
Likes: 6
kenB, tell us parts reference, please.
Reply
0
Old Jun 5, 2017 | 09:46 PM
Share
  #46  
779civic's Avatar
779civic
Thread Starter
Intermediate
 
Joined: Sep 2012
Posts: 34
Likes: 1
From: oklahoma
Acura Transmissions & Acura Performance Parts | Acura Supercharger | Acura Torque Converter
Says they build to your spec.
Reply
0
Old Jun 6, 2017 | 05:54 PM
Share
  #47  
TheWrench116's Avatar
TheWrench116
FLETCH
iTrader: (1)
 
Joined: Sep 2008
Posts: 1,333
Likes: 151
From: tremont pa
caleb ran a 26 inch tire when he got the record
Reply
0
Old Jun 6, 2017 | 06:35 PM
Share
  #48  
KenB350z's Avatar
KenB350z
Drifting
 
Joined: Feb 2012
Posts: 2,182
Likes: 285
From: Oklahoma City, Ok
Originally Posted by 779civic
I'm wondering what his car would run with stock wheel size. Or maybe he did I just remember it was 16 rim
Yeah, it was a 16 inch wheel i think. Looked like some Rota slipstreams, because I doubt a 15's will fit over RDX stock brakes.
Reply
0
Old Jun 7, 2017 | 07:25 PM
Share
  #49  
TheWrench116's Avatar
TheWrench116
FLETCH
iTrader: (1)
 
Joined: Sep 2008
Posts: 1,333
Likes: 151
From: tremont pa
ive tried a 15" rim its close but no dice.
Reply
0
Old Jun 7, 2017 | 07:43 PM
Share
  #50  
TheWrench116's Avatar
TheWrench116
FLETCH
iTrader: (1)
 
Joined: Sep 2008
Posts: 1,333
Likes: 151
From: tremont pa
ive tried a 15" rim its close but no dice.
Reply
0
Old Jun 15, 2017 | 07:14 PM
Share
  #51  
KenB350z's Avatar
KenB350z
Drifting
 
Joined: Feb 2012
Posts: 2,182
Likes: 285
From: Oklahoma City, Ok
Originally Posted by TheWrench116
You should both come up in July
I can't guarantee it will be in July, but i am preparing for a trip sometime in the near future. Checking over the spare, fluids, etc. Might be dropping the head on before I commit.



Reply
0
Back to Subforum
1G RDX Performance Parts & Modifications
View Next Unread
Evo X injectors




Advanced Search

All times are GMT -5. The time now is 06:45 AM.