Need help please! Involves speed sensor.

Thread Tools
 
Search this Thread
 
Old 06-10-2017, 02:17 PM
  #1  
Instructor
Thread Starter
 
JwapDreams's Avatar
 
Join Date: Sep 2016
Age: 32
Posts: 113
Received 3 Likes on 3 Posts
Need help please! Involves speed sensor.

So my car is a 2005 RL and it has a bad speed sensor. I thought I had found the right part and I loosened it but, but there were wires on the inside? And the worst part is I pulled them out when I pulled the piece out.

What did I pull out??


I also cannot get this piece back into the hole. Can anyone help me find a solution to fix this?

Also, where is the actual speed sensor if it is not here? I read that it was close to the battery which is why I thought I pulled the right thing. I was wrong.

Help please
Old 06-11-2017, 06:25 AM
  #2  
Moderator
iTrader: (1)
 
teh CL's Avatar
 
Join Date: Dec 2004
Location: Kelowna
Age: 37
Posts: 14,217
Received 999 Likes on 650 Posts



Looks like you pulled out #15 or #17. Both are pick up sensors, don't know how it came apart like that though..
Old 06-11-2017, 06:57 AM
  #3  
Moderator
iTrader: (1)
 
justnspace's Avatar
 
Join Date: Feb 2010
Posts: 86,295
Received 16,267 Likes on 11,974 Posts
Originally Posted by teh CL


Looks like you pulled out #15 or #17. Both are pick up sensors, don't know how it came apart like that though..
If OP is anything like me, rip it out!!!! Ask questions later
Old 06-11-2017, 09:15 AM
  #4  
Instructor
Thread Starter
 
JwapDreams's Avatar
 
Join Date: Sep 2016
Age: 32
Posts: 113
Received 3 Likes on 3 Posts
I did rip it out. Lol.

It looks like I ripped out #10 which is the "solenoid harness".

It's a sensor that's connected to 4 solenoid that are supposedly housed in a little case on the transmission. This is a fix I can do Right?

There's literally nothing online other than the diagram above. Also, anyone know if we can removed the battery tray completely? It looks spot welded in some spots but I'm not sure it it's welded to the frame or if it's just bolted down in tough to reach spots.
Old 06-11-2017, 09:55 AM
  #5  
Moderator
iTrader: (1)
 
teh CL's Avatar
 
Join Date: Dec 2004
Location: Kelowna
Age: 37
Posts: 14,217
Received 999 Likes on 650 Posts
There's a bolt underneath the tray, it's a BITCH..
Old 06-11-2017, 10:01 AM
  #6  
Instructor
Thread Starter
 
JwapDreams's Avatar
 
Join Date: Sep 2016
Age: 32
Posts: 113
Received 3 Likes on 3 Posts
So it does come off completely. Is it located on the bottom of the tray closest to the headlight or the steering wheel? And what kind of tools? It seems like 10mm if I recall. Probably gonna need an extension right?
Old 06-11-2017, 11:39 AM
  #7  
Moderator
iTrader: (1)
 
teh CL's Avatar
 
Join Date: Dec 2004
Location: Kelowna
Age: 37
Posts: 14,217
Received 999 Likes on 650 Posts
Literally right underneath it & yea you'll need a couple extensions
Old 06-12-2017, 03:16 AM
  #8  
Cruisin'
 
intex's Avatar
 
Join Date: Sep 2016
Age: 38
Posts: 15
Likes: 0
Received 2 Likes on 2 Posts
Ouch... that's a tight spot to repair those wires. I did it on mine but it was out of the car.

What is happening with the car to make you believe the speed sensors are bad?

Last edited by intex; 06-12-2017 at 03:26 AM.
Old 06-12-2017, 11:10 AM
  #9  
Instructor
Thread Starter
 
JwapDreams's Avatar
 
Join Date: Sep 2016
Age: 32
Posts: 113
Received 3 Likes on 3 Posts
How do you take it out of the car?

And it's the speed sensor because it locks the tranny, the D is flashing, the Speedo doesn't work, and every other light gets tripped too.




All times are GMT -5. The time now is 06:12 AM.