When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3G TL Parts - Headlights, Grills, Camber Kits, Jpipe, Tails & More
Category: Accessories Price: $1 Private or Vendor Listing: Private Listing Part Fits (you may select multiples): TL 3G Location (State/Prov/Terr): FL Item Condition: Used
Okay, some odds and ends remaining from my TL's...
Figured there's no sense in holding onto these items forever.
I'll ballpark shipping in your favor, shipping in the USA.
Paypal is my preferred. Bare with me on shipping as I may need to find boxes etc to get things out.
J.
Base Headlights $200 plus shipping
They were a backup set I had...they have no broken tabs to speak of, the outer lens on the driver side does have an odd area of tiny cracks but they are only seen at a certain angle and a certain lighting.
Overall, they'd be a good set for someone to modify or play with. They are currently NOT sealed shut because I experimented with sealing them with butyl on the outside of the channel (as we seal tails) and it didn't work. So you'll need to clean that up and make whatever modifications you'd like and seal them up. I believe you'll need to swap over the rear caps over the bulbs and the "fog" bulb rubber gasket from your current set.
They are blacked out on the rings and behind the amber signal area.
Here they were in their former glory Untitled by rock star, on Flickr Untitled by rock star, on Flickr
2004-2005 Ballasts
I bought them as backups they are not the slim ones. I'll include the extra wiring. $75 each/$140 for Both plus shipping
Daytime running light module...worked tried and true and it's discontinued. I would only suggest NOT putting it on a kill switch due to heat issues (trust me on that).
You'll have to look up how to wire it. $40 plus shipping.
Base silver grill, good if you wanted to keep yours and have a set painted. I'm big on being able to revert to stock $75 plus shipping
Ingalls Rear 2 arm lower camber kit
These were leftover from my blue TL-S...bushings have surface cracks and rust but seem solid. They've been cleaned up and lubed. $90 plus shipping
XLR8 Motor mount inserts
I swapped them thinking they might be damaged, but they weren't. $60 plus shipping
Type S Oem Clear diffuser
they do have some surface cracks, but not very visible
and of course, OEM $80 plus shipping
Type S lower grills
Not needed after putting on the aspec $40 plus shipping
Window Rollup Module
No picture, but can take at your request $30 plus shipping
Base Steering wheel in good used condition
bought it and never used it $50 plus shipping
RV6 V3 Jpipe
Came off Blue TL from Up north so surface rust looks weathered (so PINTEREST!!!!)
I wrapped the flex section in header wrap because I don't like chancing any vibration sound. The flex section had some exterior mesh damage but nothing earth shattering, Richie sent me new sections of flex for an easy repair along with new gaskets
which I will include. $300 plus shipping
RDX Caliper Covers $30 plus shipping
Rear mud guards in KBP $30 plus shipping
07/08 Base Reds OEM with smoked vinyl over the brake area
The seller of these to me open one of them and it wasn't perfect, has some visible imperfections in the smoked vinyl and the edges of the lights.
I'm letting these go cheap due to that. $125 plus shipping
OEM Base Red Stripes
These are in excellent condition in my opinion. No pics off of they car but they remain and car doesn't...I can take pictures if you need them. $175 plus shipping DSC_9171 by rock star, on Flickr DSC_2551 by rock star, on Flickr DSC_2766 by rock star, on Flickr DSC_3121 by rock star, on Flickr
LOL, no worries, man...
the window module is a stock photo...I'll have to dig it up from my box of goodies.
Sounds good, man...
again, be patient with me, I'll need to find boxes!
PM's to you both
itsdadaDAVID let me know, man...just found a few boxes at work, and one would house the grills perfectly. I can ship them off tomorrow.
Forgot to add
LED tail light boards and extra gaskets and bulb sockets (package deal), if you have 2 sets of alternating tails, makes swapping them out very quickly a cinch. $60 each / $110 for both...plus shipping (minimal)
Pricing Adjusted slightly and reflects shipping/paypal included. Prices are fairly firm at these prices although discussions are always welcome.
Still Available:
04/05 Ballasts X 2 $65 shipped each/$120 for both
LED tail boards X 2 $55 shipped each/$100 shipped for both
DRL Module $40 shipped
07/08 Base Smoke Tails $135 shipped
Mud guards $40 shipped
Steering Wheel $60 shipped
Type S lower grills $45 shipped
Ingall's lower Camber kits $75 shipped
75A motor mount inserts $50 shipped
Type S headlight diffusers X 2 $75 shipped
sidemarkers X 4 $35 shipped per pair/$60 shipped for the set of them
Guitarplayer16 modified front sidemarkers - 5500k white leds $60 shipped for the pair
Amber headlight diffusers $25 shipped
smoked amber headlight diffusers $25 shipped
2007 6MT ECU $400 shipped (I have another thread on it, but figured I'd mention here in case anyone missed it).
***note for anyone concerned about the type s headlight diffuser's imperfection noted***
Here, to show you in greater detail.
they're tiny...up close you see them, as you back away about a foot you don't...inside a headlight lens with darkness behind it and a bulb or a light on, you really do not see them.
Yes...every single picture of my car that isn't amber has them. They are not smoked more or less...they are oem with white led DSC_3909 by rock star, on Flickr
white led sidemarker's up close...they were sealed with butyl and wrapped in the anti stick tape...I used painter's tape to go around that to keep it from touching the car when installing or removing.
GP16 is the effing man!
How's things Rockstar... Side-markers still around? Do both front and rear show as they look in your hand (last pic) when not on and then white and red front/rear?
Plug n play on Type S - If yes to those 3 questions I'll take the pair for $60 shipped. BTW - your car lives on in those pics. Simply gorgeous. Who's blue type S?
Hey man,
yeah, they're in good condition, man...
If memory serves me correctly, the front whites didn't sell yet.
and I definitely have at least a set of type s smoked to white oem rear.
Is that the duo you're asking about?
Life is good brother...
I sold the black TL
then bought the blue TL...
then bought the CTS-V Caddy...
Hey man,
yeah, they're in good condition, man...
If memory serves me correctly, the front whites didn't sell yet.
and I definitely have at least a set of type s smoked to white oem rear.
Is that the duo you're asking about?
Life is good brother...
I sold the black TL
then bought the blue TL...
then bought the CTS-V Caddy...
Damn I must be working too hard - I knew you sold the black beauty and kinda knew you had a CTS - V (nice friggin car) , but somehow missed theft you had a blue type-s. So I have type s OEM rear.
I'm looking for front and rear matching LED wrapped surrounded by chrome (those are sweet) like the ones in your hand wrapped with tape. Sounds like you may have sole the rear?
No sir, I didn't sell the sidemarkers...
BUT, I don't have white rear, they are just red to go with tails then the white (5500K? white with little blue) to match when I ran the switchbacks on the front signals.
Yeah, bought blue, transferred some stuff over...sold black. Then, wife wanted me out of racecar and let me get CTS-V
Anyway had a guy request all these pics of the sidemarkers and then never responded
Good thing you didn't let your wife in on the secret .... that a CTS-V is a racecar :thumbs: I wish I logged on a few days earlier....you must have had quite the sale with all the mods you've been through. I'm looking for more of a bright white on the side markers as blue won't match my CBP
Speaking of lights, I'm cracking my headlights open today. I'm going to replace the HID lens with the ZKW-R (and better bulb). I want to do the carbon look to replace the amber. Couple of questions as I'm sure you've opened uproar share of headlights. Do I go over the amber with the carbon fiber? Is there ant way to keep the chrome strip exposed on top the fiber?Not sure I'll like how that looks but it could be cool. And what's the best way to focus the clear lens (as far as getting power to it. As always Thanks!
Well, maybe I described it wrong, but pretty much they were a white that matched the 5K parking/signal bulbs that matched the Osram CBI low beam.
They looked great, not blue...just not warm yellow white, more toward crisp white.
I did! I sold a bunch, it's crazy how much you accumulate over the years.
The 2 amber pieces you're wrapping are on top and bottom of the chrome strip, you won't lose it.
Just be careful how thick your vinyl is, on more than one occasion I had the vinyl be too thick and make contact with the inside of the outer lens and then it looks wet or like there's an imperfection.
Thanks for the info brotha - gotcha on the color - would they look out of place with the stock smoke rear side markers or are they a direct match.
Got one of them cracked, whats the best way to separate the diffusor from the chrome strip. Tried pulling a bit and the chrome strip lost a bit of the chrome.
you need to take needenose pliers and a pick, or a blade and cut off the metled feet on the back end and push them through, once you fuck that chrome, you cant' fix it...so anticipate painting it now.
yes, it's a perfect match of the smoked sidemarker in the rear because it's a modified OEM front sidemarker...guitarplayer16 on here in Canada opens up the rear and replaces the amber LED with white ones. He did a whole thread finding the best and brightest and whitest.
I'll take them. What email is your PayPal connected to?
Yeah - I figured I'd have to paint that chrome strip. The CF is a gunmetal color (was going for the CBP match). https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 Almost wish I went with darker CF and I could wrap the chrome in the gunmetal CF for a little contrast.
I wouldn't bother wrapping the chrome strip with vinyl because it's such a tight fit in the channel and it'll have such little surface to adhere to that it'll end up looking bulky and not sit perfectly in my opinion.
Sounds good, my friend. I'll PM you.
Still have amber diffusers?? Doesn't matter which one's, which ever set is in better condition. I'll take either set. Let me know and I can PayPal you money asap, thanks
Sure do, Burtch07
Shipping and things are getting crazy here with the hurricane and I'm going out of Country on Monday so I may close shop for a few days.