teh CL's.... Aspec RL
The following users liked this post:
justnspace (09-02-2016)
#167
Moderator
Thread Starter
iTrader: (1)
Thanks boys..
As for the axle, yea vibrations. Except for that, not much really.
The coils are 18k F & 16k R. Want to upgrade to swift springs with 20K F & go down to 12K R. The rear is a bit much sometimes
As for the axle, yea vibrations. Except for that, not much really.
The coils are 18k F & 16k R. Want to upgrade to swift springs with 20K F & go down to 12K R. The rear is a bit much sometimes
![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
#168
I was thinking I would go with either a 12/10 or 14/12 setup, won't be any audio in the trunk this time around or really any rear seat passengers, so, I don't want to go with too stiff of a setup for the rear.
Looking at FF Type 2 with the FPS(?) upgraded springs.
Looking at FF Type 2 with the FPS(?) upgraded springs.
#170
let us know how the TL axle works out in the RL application. good info to know if it will be a cheaper option for everyone.
#172
You're probably right with not going too stiff with the rear suspension, just going to make the rear bounce around if it's too much.
I am going with about the same ride height as you are(rolled/pulled fenders), but I don't know about 18/20 up front!
I am going with about the same ride height as you are(rolled/pulled fenders), but I don't know about 18/20 up front!
#177
Moderator
Thread Starter
iTrader: (1)
Some debri off a truck on the highway. Lip was bondo'd by the previous owner and the impact took a chunk out ![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
As for the axle, did the swap a few weeks ago & didn't turn out as planned. Joint was being stubborn and wouldn't separate from the half shalf. I was in a time crunch and had to go to work so I put it all back together and haven't had the chance to get back in there..
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
As for the axle, did the swap a few weeks ago & didn't turn out as planned. Joint was being stubborn and wouldn't separate from the half shalf. I was in a time crunch and had to go to work so I put it all back together and haven't had the chance to get back in there..
![Bored](https://acurazine.com/forums/images/smilies/bored.gif)
#178
#179
Moderator
Thread Starter
iTrader: (1)
Rarely run into RL owners but I sometimes pass one on my way to work & buddy is always giving me cut eye.. ![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
I've only had 1 gas station comment & it was 2 guys in a done up Mazda 3 asking.. "is that stock height?" .. So of course I'm like "yea man, 100% stock"
![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
I've only had 1 gas station comment & it was 2 guys in a done up Mazda 3 asking.. "is that stock height?" .. So of course I'm like "yea man, 100% stock"
![Chuckle](https://acurazine.com/forums/images/smilies/chuckle.gif)
#180
"done up Mazda 3".......what else would you expect! ![Roll Eyes](https://acurazine.com/forums/images/smilies/rolleyes.gif)
I really need to get my project started.
Hoping to pick up a local parts car(another 03 TL Type S A Spec) to get a bunch of things that will help with the safety inspection and the restoration work.
Which means, technically, I would own a black AND a blue 03 TL Type S A-Spec!
![Roll Eyes](https://acurazine.com/forums/images/smilies/rolleyes.gif)
I really need to get my project started.
Hoping to pick up a local parts car(another 03 TL Type S A Spec) to get a bunch of things that will help with the safety inspection and the restoration work.
Which means, technically, I would own a black AND a blue 03 TL Type S A-Spec!
![Butt Head](https://acurazine.com/forums/images/smilies/butthead.gif)
#189
Moderator
Thread Starter
iTrader: (1)
![](https://cimg0.ibsrv.net/gimg/acurazine.com-vbulletin/2000x1124/20160901_181316_dc49a985a60037b10c62afaa5354587cff22d85d.jpg)
Not much has changed with the exception of:
- AC is toast, haven't investigated but gonna take a wild guess that it's the stator. Not looking forward to replacing that
![Bored](https://acurazine.com/forums/images/smilies/bored.gif)
- Sunroof auto function stopped working which is either the switch or the sunroof console.
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
The following users liked this post:
justnspace (09-02-2016)
#190
Any plans for centre caps?
I REALLY have to get my TL project done....been seeing so many local modded Acura's.....
Any other engine performance plans in the works?
I missed after Jeremy had asked, did you finally get things sorted out with the axles?
I REALLY have to get my TL project done....been seeing so many local modded Acura's.....
Any other engine performance plans in the works?
I missed after Jeremy had asked, did you finally get things sorted out with the axles?
#191
Moderator
Thread Starter
iTrader: (1)
I have the BMW ones but never got around to doing anything with them.
I have some
performance mods I have waiting to go on but just need time more than anything.
As for the axle, it's still sitting in my garage waiting to go on![Bored](https://acurazine.com/forums/images/smilies/bored.gif)
I'm down for a acurazine meet up, hurry up already...
I have some
![Ninja](https://acurazine.com/forums/images/smilies/ninja.gif)
As for the axle, it's still sitting in my garage waiting to go on
![Bored](https://acurazine.com/forums/images/smilies/bored.gif)
I'm down for a acurazine meet up, hurry up already...
![Chuckle](https://acurazine.com/forums/images/smilies/chuckle.gif)
The following users liked this post:
teh CL (09-02-2016)
The following users liked this post:
teh CL (09-02-2016)
The following users liked this post:
teh CL (09-02-2016)
#196
Senior Moderator
Did you try the moonroof reset similar to the window reset?
The following users liked this post:
teh CL (09-05-2016)
#199
#200
Moderator
iTrader: (1)
nah, I'm NOT looking at the rear.
the way the front fenders sit on the front wheels make it look fat! (which is a good thing, IMO)
looks akin to an S2K front end!!!
then again, I really really love the way my front fenders look too!
maybe it's a Honda thing and their beautiful sleek front fenders
the way the front fenders sit on the front wheels make it look fat! (which is a good thing, IMO)
looks akin to an S2K front end!!!
then again, I really really love the way my front fenders look too!
maybe it's a Honda thing and their beautiful sleek front fenders