1. Brand of Rim - Fast Kosoku
2. Rim size - 19x8.5 front, 19x9.5 rear
3. Offset - +25
4. Brand of tire - Sigma Velozza
5.Tire size - 225/35/19 front 235/35/19 rear
6. Drop Type and Amount - Tein SS Coilovers 3" drop all around
7. Do they rub - On Big Bumps
8. Transmission type - Auto

 

Love it

 

I like the size of our 3g TLS. the rims really go well with it

 

1. Brand of Rim - WatercooledIndustries (WCI) CC10
2. Rim size - 18x9.5 all around
3. Offset - +35, with spacers +15 for front, and +2 in the rear
4. Brand of tire - Economics, some cheap brand guy before had
5.Tire size - 205/35/18
6. Drop Type and Amount - Bags, A lot..
7. Do they rub - Only while turning when riding low
8. Transmission type - Manual

 

1. Brand of Wheel: Varrstoen MK2
2. Wheel Size: 18 x 10 squared
3. Offset: +25 squared
4. Brand of Tire: Achilles ATR Sport 245/40
5. Drop Type and Amount: BC Coilovers 12F/10R, only rubs on dips (have only driven about 100 miles so far on this set up), current height is 24" ground to fender lip in front, 24.5" in the rear, i have rolled/slightly pulled the fronts and rears, and shaved the tabs
6. Transmission: 5-spd slushbox

before and after - XXR 530s 18x8.75 et35 to the new Varrstoens


I took these shots, right after I got the wheels home and mounted them up, so dirty car lol...will be taking better pics over the weekend and will update!

 

*Waits patiently*

 

hahaha

 

Some updates - still a dirty car - toe has been set to zero, camber is natural -1.6 in front, and -2.4 in the rear...not running any camber kits yet.

 

1.Brand of Rim - Motegi
2.Rim size (diameter and width) - 19" x 10"
3.Offset - +45mm(f) +35mm(r)
4.Brand of tire - Uhtso
5.Tire size - 265/30/19
6.Drop Type and Amount - Function/Form - not for sure how much
7.Do they rub - Rubs in front tuning into my driveway
8. Transmission type (use of spacers if 6MT) - auto

 

[http://imageshack.com/a/img908/5215/BrOftb.jpg]
[http://imageshack.com/a/img907/2858/t4e7Jm.jpg]
[http://imageshack.com/a/img903/3545/5XF1mx.jpg]
[http://imageshack.com/a/img907/739/BUQzUW.jpg]

 

1.Brand of Rim - Motegi
2.Rim size (diameter and width) - 19" x 10"
3.Offset - +45mm(f) +35mm(r)
4.Brand of tire - Uhtso
5.Tire size - 265/30/19
6.Drop Type and Amount - Function/Form - not for sure how much
7.Do they rub - Rubs in front tuning into my driveway
8. Transmission type (use of spacers if 6MT) - auto

 

1.Brand of Rim - Enkei RPF1
2.Rim size (diameter and width) - 18" x 9.5"
3.Offset - 38mm
4.Brand of tire - Michelin Pilot Super Sport
5.Tire size - 245/40/18
6.Drop Type and Amount - ASPEC suspension
7.Do they rub - Full lock when backing up.
8. Transmission type (use of spacers if 6MT) - 5AT no spacers

 

*Just an update post since I can't edit my original.

1.Brand of wheel - Miro 112 (custom Hyper Silver finish by Detroit Wheel and Tire)
2.Wheel size (diameter and width) - 18 x 9.5
3.Offset - +40
4.Brand of tire - Goodyear Eagle F1 AS2
5.Tire size - 265/35
6.Drop Type and Amount - 1 finger, front and rear
7.Do they rub - Never
8.Camber F/R - -1.5° / -1.5°
9. Transmission type - AT

*Slight roll in the rear, and the 265 tire I'm running is about .4" narrower than a normal 265, which is why it fits perfectly in the front without much negative camber.


Tail Happy. by Andrew Thompson, on Flickr

 

1. Brand of Rim - Stance SC-5
2. Rim size - 19x8.5 front, 19x9.5 rear
3. Offset - +35 Front, +40 Rear
4. Brand of tire - Hankook Evo v12
5.Tire size - 235/35/19 front 245/35/19 rear
6. Drop Type and Amount - Tein Basis Coilovers 2" drop all around
7. Do they rub - Nope
8. Transmission type - Auto

 

Will these fit?

 

You should be fine from seeing what others are running on here. You may have to roll, but I'm not 100% sure.

 

1.Brand of Rim - Varrstoen
2.Rim size (diameter and width) - 19" x 9.5"
3.Offset - 22mm
4.Brand of tire - Nitto 555
5.Tire size - 235/35/19
6.Drop Type - Tein Strett Advance
7.Do they rub - Very rarely. Only in the front.
8. Transmission type (use of spacers if 6MT) - 5AT (no spacers)

 

Mannn I was so excited to see all these setups, but I can't see majority of the pictures

 

1.Brand of Rim - Ron Jon sport Inspyre I
2.Rim size (diameter and width) - 19" x 8.5"
3.Offset - 42mm
4.Brand of tire - Sunny / SN3970
5.Tire size - 235/35/19
6.Drop Type and Amount - Coil overs - tucked in a bit with a slight fender roll.
7.Do they rub - No rubbing at all
8. Transmission type (use of spacers if 6MT) - 5AT no spacers

 

Brand- XXR 527 forged
Rim size - 18x9
Offset +35
Brand of tire- pirelli
Size- 245/40/18
Drop type- tein h tech springs on koni str.t orange
Do they rub- not at all
Transmission - 6 speed. 5mm spacers in front to clear brembos

 

Brand of Rim - 08 Base TL Stock
2.Rim size (diameter and width) - 17" x 8"
3.Offset - None
4.Brand of tire - Yokohama YK580
5.Tire size - 235/45/17
6.Drop Type and Amount - Tein SA Coilovers - 2" ish
7.Do they rub - No rubbing
8. Transmission type (use of spacers if 6MT) - AT no spacers
9.

 

A lot of nice cars out there with really clean set ups. Here's mine... Not exactly what I want, but it will do for now. I couldn't pass up the deal on the wheels and tires. Hoping to go wider eventually, if ever.

1.Brand of Rim - MB Weapons
2.Rim size (diameter and width) - 18x9
3.Offset - 38mm
4.Brand of tire - Barum Bravuris 3
5.Tire size - 255/35r18
6.Drop Type and Amount - Tein Flex about 1.5" all the way around. Estimate.
7.Do they rub - No rubbing even if not rolled, but rolled in the rear just for peace of mind.
8. Transmission type (use of spacers if 6MT) - 6MT No spacers
9. Picture

 

All these cars look absolutely stunning, can't wait to get wheels on my 3G.

 

Are you planning to lower? Or keep it at stock height?

 

Eventually planning on lowering it but nothing crazy probably H&R springs, would like to get a lip kit first though.

 

1.Brand of Rim - MB motorsports VR-5
2.Rim size (diameter and width) - 18x8 F 18x9 R
3.Offset - 38mm Front. 35mm REAR
4.Brand of tire -
5.Tire size - 225/40/18 F & B
6.Drop Type and Amount - tanabe. 1.5 f 1.8 r After powder coating.




7.Do they rub - None
8. Transmission type (use of spacers if 6MT) - none. 5at
9. Picture

Current setup after lots of research. Thanks to all the info on acurazine.


1.Brand of Rim - ARK DESIGN R8's
2.Rim size (diameter and width) - 18X9.5 ALL
3.Offset - 40mm
4.Brand of tire - 123 S Achilles
5.Tire size - 265/35/18
6.Drop Type and Amount - Tanabe 1.5" F / 1.7" R
7.Do they rub - rolled rear fenders
8. Transmission type (use of spacers if 6MT) - 5AT No spacers
9. Picture

 

1.Brand of Rim - ARK DESIGN R8's
2.Rim size (diameter and width) - 18X9.5 ALL
3.Offset - 40mm
4.Brand of tire - 123 S Achilles
5.Tire size - 265/35/18
6.Drop Type and Amount - Tanabe 1.5" F / 1.7" R
7.Do they rub - rolled rear fenders
8. Transmission type (use of spacers if 6MT) - 5AT No spacers
9. Picture


[/QUOTE]

 

[/QUOTE][/QUOTE]

Sorry to post twice, phone is being difficult. But mean to say looks clean! Only lowered on springs too 👌🏼

 

1.Brand of Rim - Work Emotion XD9
2.Rim size (diameter and width) - 17 x 9.5
3.Offset - (+17mm)
4.Brand of tire - Pirelli P-Zero
5.Tire size - 225/45/17
6.Drop Type and Amount - Coilovers, shaved rear fenders, pulled front fenders
7.Do they rub - On full lock, big dips/humps
8. Transmission type (use of spacers if 6MT) - 6spd, no spacers.








1.Brand of Rim - MB Battles
2.Rim size (diameter and width) - 18 x 9.5
3.Offset - (+12mm)
4.Brand of tire - ??? Can't remember
5.Tire size - 225/40/18

 

1.Brand of Rim - XXR 530
2.Rim size (diameter and width) - 18x8.75
3.Offset - +20
4.Brand of tire - Continental DWS06
5.Tire size - 225/40/18
6.Drop Type and Amount - H&R Sport kit 50106 - Front 1.4 Rear 1.3

 

I know this is very late, but do you know by how much did you drop in front and rear?

 

Who are you asking this?

 

1.Brand of Rim - Axis Sport XM
2.Rim size (diameter and width) - 18X8 ALL
3.Offset - Unknown, car came with the rims
4.Brand of tire - Pirelli P Zero Nero All Season Run Flats
5.Tire size - 245/40/18
6.Drop Type and Amount - None
7.Do they rub - Not so far, only have a few miles on them
8. Transmission type (use of spacers if 6MT) - 5AT No spacers
9. Pictures will come later once I clean the wheels

 

Man, it must take a long time to clean them wheels. J/K.

 

Dude I knew I totally have seen your car before, I live in Loma Linda as well. Usually see your car on Mountain View and Redlands Blvd. Do you know of any meets out in our area?

 

Is this in Redlands off of San Bernardino Blvd? Across from the new 24 Hour Fitness? Yay!!! A local member! Haha.

 

yea dude!

 

1.Brand of Rim - 18X8 ENKEI PERFORMANCE SS05 HYPER GREY
2.Rim size (diameter and width) - 18X8 ALL
3.Offset - 38mm
4.Brand of tire - Goodyear Eagle F1 Asymmetric 2
5.Tire size - 235/45/18
6.Drop Type and Amount - None
7.Do they rub - No
8. Transmission type (use of spacers if 6MT) - AT

 

1.Brand of Rim - VIP Modular
2.Rim size (diameter and width) - 19x9.5 / 19x10.5
3.Offset - +25
4.Brand of tire - Federal 595
5.Tire size - 225/35 FR - 235/35 RR
6.Drop Type and Amount - ISC N1 Fenders rolled slight pull
7.Do they rub - The rears do on harsh bumps and uneven roads
8. Transmission type (use of spacers if 6MT) - 6spd, 3mm spacer needed in front or will need to shave calipers some (not for the weak at heart)
9. Camber - I was running these at zero toe zero camber

 

Greetings my fellow Acura enthusiasts. I'm getting conflicting information. Does anyone know for sure if the "XXR - 530" will fit the 3rd gen type-s models?