SOLD! Ace Allure 19x8 43offset (P/C White)
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.
SOLD! Ace Allure 19x8 43offset (P/C White)
For sale is my Ace Allure (19x8 43offset 5x144.3) wheels that I had powder coated white.
Before anyone asks:
- Will not clear BBK
- No TPMS
- No Tires
These wheels have a couple flaws, and I feel the price reflects this.
Pics:
Wheel 1.
Only blemish is a 1in spot of curb rash.
Wheel 2.
Wheel was cracked but repaired (No Air Leak)
Wheel 3.
Small flat spot on inner lip. I experienced small vibration at 70mph+ (Fixable No Air Leak)
Wheel 4.
Very small flat spot in inner lip (hard to get a pic of it)(Fixable/No Air Leak).
Pics of wheels on car.
Like I said, all flaws have been taken into consideration in price.
Gonna do $400 OBO + Paypal + Shipping
Before anyone asks:
- Will not clear BBK
- No TPMS
- No Tires
These wheels have a couple flaws, and I feel the price reflects this.
Pics:
Wheel 1.
Only blemish is a 1in spot of curb rash.
Wheel 2.
Wheel was cracked but repaired (No Air Leak)
Wheel 3.
Small flat spot on inner lip. I experienced small vibration at 70mph+ (Fixable No Air Leak)
Wheel 4.
Very small flat spot in inner lip (hard to get a pic of it)(Fixable/No Air Leak).
Pics of wheels on car.
Like I said, all flaws have been taken into consideration in price.
Gonna do $400 OBO + Paypal + Shipping
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.
No repairs needed to run these...just tires.
The only vibration i felt was a small one from wheel number 3. in the pictures and this was when i had it on the front wheel and over 70mph.
Once i put that wheel on the rear of the car the vibration is much less noticable at 70mph +
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.
Saturday Bump.
A little more info on the wheels. Both of the flat spots are not from hitting anything.
When these wheels were re-finished white the powder coating place set the wheels down too hard while they were still hot from bake.
A little more info on the wheels. Both of the flat spots are not from hitting anything.
When these wheels were re-finished white the powder coating place set the wheels down too hard while they were still hot from bake.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
Jul 16, 2017 07:33 AM
