Why no companies make an exhaust for 09+ tsx?
#41
Thank you for the pic
Are the tips too big for the hole or it just isn't properly centered below the cut outs?
Are the tips too big for the hole or it just isn't properly centered below the cut outs?
#45
It doesnt look like the tips are too big. I thought the 4.5 was going to be overkill, but its not.bad. although I think 4 inch tips would look nicer. I have to get under the car again and mess with the fitment to see if I can just bend the hangers to center the tips.
#49
You can sell a car before you pay it off
Yeah people do it daily
Any pics of the rest of your wagon, to see what you have done with the shaggin wagon?
Yeah people do it daily
Any pics of the rest of your wagon, to see what you have done with the shaggin wagon?
#50
Just drove from Miami to Broward and back ranging from 70-95 mph (allegedly). Cruising at 70 mph has a nice subtle hum but no drone or rasp. raising the speed to 80 make it slightly louder but still very nice.
I can take pics of the rest of the car later if you would like. I am not a fan of stock, so i have an hps intake with a heat shield and also a tube drawing cooler air from the lower bumper grill aimed at the filter. Additionally, i have a NRG grounding kit and did the throttle body coolant bypass. Next up is either brakes or suspension, likely brakes since i HATE the peddle feel on these cars. I am trying to rig some sort of brake MC brace since i have had success on other cars with that improving braking and peddle feel.
I can take pics of the rest of the car later if you would like. I am not a fan of stock, so i have an hps intake with a heat shield and also a tube drawing cooler air from the lower bumper grill aimed at the filter. Additionally, i have a NRG grounding kit and did the throttle body coolant bypass. Next up is either brakes or suspension, likely brakes since i HATE the peddle feel on these cars. I am trying to rig some sort of brake MC brace since i have had success on other cars with that improving braking and peddle feel.
#51
^
Agree pedal feel sucks.
Glad to hear no drone, for me that is the key requirement.
Have you heard the Magnaflow setup on the 2nd gen TSX? Wonder how that compares.
Agree pedal feel sucks.
Glad to hear no drone, for me that is the key requirement.
Have you heard the Magnaflow setup on the 2nd gen TSX? Wonder how that compares.
The following 5 users liked this post by boki_cu2:
2012wagon (02-27-2015),
Harper (02-27-2015),
justnspace (02-27-2015),
opboarding (02-28-2015),
xtcnrice (02-27-2015)
The following users liked this post:
Harper (02-27-2015)
The following users liked this post:
dave_88 (03-11-2015)
The following users liked this post:
xtcnrice (02-27-2015)
#57
Three Wheelin'
Wow, that sounds great. Nice deep growl.
The following users liked this post:
CybrRdr (03-02-2015)
#59
Thank you for the pics!
#61
VTEC just kicked in, yo!
Not everyone. Just one guy
Keep yours if you enjoy it. I love mine. I'm going to DD it until one of us dies.
Or, when I come across a large sum of money and I already have a house paid off and a separate performance build, then maybe I'll get rid of the TSX for a nicer daily lol
Keep yours if you enjoy it. I love mine. I'm going to DD it until one of us dies.
Or, when I come across a large sum of money and I already have a house paid off and a separate performance build, then maybe I'll get rid of the TSX for a nicer daily lol
#62
Former Sponsor
Greddy will supposedly have the SP exhaust out soon, looks like there might be a system coming for the CU2.
#64
Racer
and i wanna call BS on somethings ive heard in the past about CU2's not having enough interest in making an exhaust because the market is not there to support it.....CU2 Squad on FB has over 1k members.... that's a lot of money even if only half the guys/gals in there buy an exhaust....and a lot of people in there mod their CU2's...
Last edited by richyrich1988; 03-18-2015 at 08:12 AM. Reason: needed to add
#66
Racer
im really wanting to order it today....but im stuck in a pickle....either get my exhaust, get the JDP carbon fiber rear spoiler or order my front sports bumper....i can't have all at the same time....lol i guess it's whichever one i wanna wait on...
#67
no offense but CU2 owners have been reading on here for a few years now about "companies" doing an exhaust, (Rv6, Greddy, Skunk 2, etc.) but nothing ever happens....then outta nowhere Tsudo makes one that sounds pretty good...for $500 i might just order it today....getting tired of waiting to be honest.
and i wanna call BS on somethings ive heard in the past about CU2's not having enough interest in making an exhaust because the market is not there to support it.....CU2 Squad on FB has over 1k members.... that's a lot of money even if only half the guys/gals in there buy an exhaust....and a lot of people in there mod their CU2's...
and i wanna call BS on somethings ive heard in the past about CU2's not having enough interest in making an exhaust because the market is not there to support it.....CU2 Squad on FB has over 1k members.... that's a lot of money even if only half the guys/gals in there buy an exhaust....and a lot of people in there mod their CU2's...
The following users liked this post:
richyrich1988 (03-18-2015)
#68
Racer
#70
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
Tsudo is around what, $500? Fujitsubo is around $1500, Mugen at $2000.
I'd guess Greddy would be in the low $1000 range, maybe?
I'd guess Greddy would be in the low $1000 range, maybe?
#71
Former Sponsor
#72
Racer
Tsudo Cat-Back shipped today...should be here next week. hoping to install next weekend...will keep yall updated...i plan on doing something diff though with mine, the only other video i have seen of the Tsudo exhaust is the one whatmyname posted....and he deleted his 2nd cat with the test pipe that tsudo provides...im not going to install the test pipe, i am going to keep my 2nd cat and will post results
#73
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
I'm interested to see/hear your results.
#74
Pro
Those short clips by whatsmyname don't have me sold on the Tsudo. The sound quality sounds worse than some of the magna flow weld ons, unless it's giving some unknown hp gains?
The following users liked this post:
dave_88 (03-20-2015)
#76
Racer
well my car won't whistle like his did...i dont have CAI....and im keeping my 2nd cat installed....also, i agree sound quality on the video is lacking a little but i plan on using my go pro for the clips i provide....and im very interested to see how it sounds with my 2nd cat still installed...i think it will sound better...time will tell...
#78
Ill see if i can steal one of my brothers go-pros and stick it on the rear bumper to get a better clip. Unless someone lives in Miami and wants to hear it in person.
The following users liked this post:
dave_88 (03-23-2015)